similar to: Recommendations on a WiFi phone for *?

I'm about to start working with WiFi phones on my Asterisk installations. Can anyone tell me if they are using WiFi phones on wireless network that is extended with WDS and how well the phone handles jumping from access point to access point while on a call? Do any WiFi phones support WPA encryption or are they all still under the impression they are only being used on public hot spots?

Greetings list, What are people's experiences with WiFi SIP phones? When I last looked into them about 18 months ago, they were incredibly expensive, had very limited range and poor battery life. In the end, it worked out much more cost effective to simply use ATAs + DECT cordless phones where there was a requirement for portable devices. I assume things must have moved on somewhat since

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

Hi List, Hope everyone is recovering from the festive season :) (ok we still have new years i guess!) Anyways, I was wondering if anyone has had any successful dealings with WiFi phones and operation with '*' at all? I've been keeping my eye on the LinkSys WIP330 ( http://preview.tinyurl.com/nccxn ) and wondered your collective thoughts? Would I be correct in thinking that (as

Anyone know of any *portable* SIP/WiFi handsets? Looking for a decent price:quality ratio, of possible. Keep seeing handsets for Vonage, etc., in Best Buy and the like, but I imagine it's locked to Vonage, and can't be re-appropriated. Thanks! -Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Does such a beastie exist? I've tried a couple of UT Starcom WiFi SIP phones (the F1000g and F3000 respectively), and found them both to be seriously lacking - regular crashes (especially the F3000), poor battery life, and poor reception in particular. However, whilst SIP phones are great, I'd really like an IAX2 phone if there is one, as I can make that work "natively" though

I bought a UTStarcom F1000 WiFi IP Phone from http://www.luxoncomm.com and tested it with Asterisk. This is a my first impression of the device. The F1000 supports SIP. It looks and operates like a cell phone, and connects to the Internet through WiFi, so you can use it at any WiFi hotspot. I set up a 802.11b wi-fi network with a Linksys BEFW11S4 Wireless-B broadband router with no security

Does anybody use UTStarcom F1000G Wi-FI VoIP phone? http://www.utstar.com/Solutions/Handsets/WiFi/ I'm planning to buy one and I need to know did you have any problems with phone. What is the sound quality? How close you need to be to the access point? Please, any information's are useful to me. -- Tomislav Parcina tparcina#lama.hr

Guys. I know there are wifi sip phones out there but I have a question, are any of these phones "anti explosive"? By that I mean, there are certain regulations about phones or cel phones that are not recommended to operate in environments like gas stations due to sparks and the chance of ingiting gas fumes. Are there any wifi sip phones out here that have complaince with regulations to

Hi folks! Based upon your experience on the field what wifi sip phone would you reccomend ? A customer asked for a wireless * install and I'm looking for advice, tnx Alessio Focardi [[*] - Interconnessioni Italy -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060628/05b2fb30/attachment.htm

Hi, I have an F3000 phone that I am trying to register to asterisk. As far as I can tell I have everything in correct. Are there any little quirks I need to worry about? The phone has internet access, set it's time.. I can access the web config, but it just won't register with asterisk. I don't see anything meaningful in the full log.

Hi Jan, It seems the last changes to xen-unstable to implement multi-msi-irq''s cause some trouble. The guest starts and works fine. But it causes a xen crash when shutting the guest down. (xen_changeset: Thu Jul 4 16:01:06 2013 +0100 git:d4435fe) If you need more info than given below in the serial log snippet, just say so .. -- Sander (XEN) [2013-07-17 19:10:09] AMD-Vi: Share p2m

Whoo hoo! I just received my WIP300 from voipsupply. I have to let it charge before I can play with it. A few quick comments: - I started a Wiki page at voip-info to post issues, firmware news, etc. I really like the wealth of info on the GXP-2000 page, so I wanted to start something similar for this phone. http://www.voip-info.org/wiki/index.php?page=Linksys%20WIP300 - My kit

Hi there, I am trying desperatly to register my WiFi Phone UTStarcomm F1000 with my asterisk server. I already changed the name of the user to "anonymous" since it looks like the phone sends that name. The WiFi Phone's IP is 192.168.1.217, the asterisk server's IP is 192.168.1.200 What is it that I am missing? Any help very much appreciated!!! The error message I get is: Jan

We're contemplating Linksys WIP 330 phones, but we're concerned about configuration effort. Does anyone have the file format for an XML file to configure this phone? We got auto-provisioning to D/L a file, but the XML file format seems to be a secret... Thanks, Michelle -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello list, I was going to buy this weekend a Wisip from http://www.pulverinnovations.com/, but jeff got out of stock and he wont have Wisip for the next 3 to 4 weeks. So I start searching for other wifi phones because I was really upset about it and I found IPC5000 from http://www.fahdtel.com/sip_phones.htm, I liked so much the pic that I email the guy and he send me the PDF with all the details

Can anybody help me on configuring utstarcom F1000 on asterisk? Is there a way to do it or is it impossible? ___________________________________________________________________________ Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o

We''re going to have problems keeping cookies across domains. We want people to shop in one domain (e.g. "booksareus.com") and then checkout on the same server securely under a different domain (e.g. "greatbooks.com"). When we make the jump to the secure domain (the checkout link) can we submit the user''s session ID along with it and have it

Dear list, Is there anyway i can make the following formula short by r-programming? CYCLE.n<-c(NA, WET[1]*DRY[1], WET[1]*DRY[2]+WET[2]*DRY[1], WET[1]*DRY[3]+WET[2]*DRY[2]+WET[3]*DRY[1], WET[1]*DRY[4]+WET[2]*DRY[3]+WET[3]*DRY[2]+WET[4]*DRY[1], WET[1]*DRY[5]+WET[2]*DRY[4]+WET[3]*DRY[3]+WET[4]*DRY[2]+WET[5]*DRY[1],

All, has anyone any experience in using Wifi smartphones as SIP clients? Does this work properly? What models/brands are optimal for this (in terms of ease of use, battery life etc)? Thx!! B.