similar to: Answer call waiting / flash with Zaptel POTS and VOIP

I've tried to ask this before but didn't want to waste a lot of bandwidth. However, I have to give the params in order to make the exact question understood. We have 2 ZAP FXO connected to two phone lines(2xX100P) 3 phones connected to a TDM400P with FXS modules Usually a caller will be on ZAP/2 and the first outbound line in the g1 group is on ZAP/1. There are two (main) call waiting

Hi all, I've been trying to wrap my mind around this one for several days now. How can I 'debug' the CallerID reception on a Zap/POTS channel? I have a POTS line with CallerID and a Digium TDM11B card right now. I have my signalling set to ks for both sides, can make and receive calls just fine. But I never get CallerID on incoming calls. I get the following messages: Aug 11

Any ideas on how to disable the audible incoming call beeps with *. We have a dial pool and if someone calls into the pilot number and we're talking to them, if another call comes in, both us and the far end users hear the incoming call beep. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, The call waiting tone is very annoying (you hear nothing while it plays the beep). I need callwaiting because of the queues (the phone has to ring as soon as you hangup) but I want to remove the beep on my dahdi channels, how can I do? Thanks, Niccol? -- http://www.linuxsystems.it

Help! I am having a problem getting wall waiting to work. I have a X100p and a TDM400 card with and analog phone attached (as well as a number of SIP phones) running on RedHat 9.0 box. The PSTN line has the call waiting feature. If I am on the phone, I get a beep indicating a second call is waiting. However, there is no way, no how, that I can get it to switch to the second line! Flash button,

Hello Asteriskers, :-) We're trying to set up an outbound notification calling for system alerts with Asterisk 1.4.0. We generate a call file in /var/spool/asterisk/outgoing and the outbound call is originated through Zap/1 (Sangoma A200D to a Canadian POTS line). The problem is that Asterisk does not wait for the other side to answer before it starts playing the message. So the

In the docs for the zapata.conf file I see a setting called call waiting, presumably for giving the call-waiting beep to an analog phone rather than just returning immediately from Dial() with a return value of 0 and the priority increased by 101. In short, I would like to: Rather than catch a busy line after an immediate return from Dial() I would like Dial() to give a call-waiting beep and

I have two call waiting problems. I have a POTS line into and FXO port and telephones on an FXS port 1) I can't seem to use the flash button(on the phone) to answer a call waiting call. I see the callerid coming though and here the call waiting tone, but I just can't seem to answer it. The flash button seems to have no effect. I have: callwaiting=yes in zapata.conf

I have been looking for the answer to this question for a while. Google-ing and reading the archives of Asterisk-Users has not enlightened me. It seems that this question has been asked many times, and many times it has gone unanswered. I have call waiting and three way calling on my PSTN line from Verizon (the local telco). This is connected to a FXO port on a TDM400P. I also have

I had a similar issue with sending a flash to the PSTN for call waiting. I found that my dial plan in the extensions.conf file was not allowing me to dial *xx. Once I corrected my dial plan I was able to dial *0, *69, *78, *79, etc. Training the wife on how to actually use it was an entirely different issue. I have not tried to enable 3-way calling via the PSTN. "Jeff Otterson"

Hi all, Hopefully you can help me. I want to turn off the audio "Call Waiting" beep that plays during a call. I have found the line in the indications.conf for Call Waiting but apart from setting the frequency to zero or the length to zero is there a proper way to disable this functionality. thanks very much alex This email and any attached files are confidential and

Asterisk 1.4.32 dahdi-2.3.0.1 Centos 5.5 Digium TE420 CAC channel bank (2) Cisco RVS4000 router Cox 50 Mbps/ 5 Mbps cable modem Flowroute provider codac G-711 90 % CPU idle callwaiting=no When there are 10-15 or more calls up the farend hears a callwaiting like beep every 3 to 6 sec. the duration of this "beep" is very short and would be no problem if it didn?t happen every few

In features.conf, I have uncommented the transfer features under feature map, but I still cannot transfer using a POTS phone on an IAXy adapter. I think I am missing something here.... Any help is appreciated. Here is features.conf: ; ; Sample Parking configuration ; [general] parkext => 700 ; What extension to dial to park parkpos => 701-720 ;

Is there anyway to turn off the call waiting beep in the grandstream and/or cisco ata186? I have a dial statement in my extensions.conf that rings 5 phones at the same time by combining them with the & in the dial statement. i.e.) exten => blah,blah,Dial(SIP/GS1&SIP/GS2&SIP/GS3&SIP/ata186a&SIP/ata186b,25,t) If one of those lines is being used, then the user gets a really

I have Asterisk setup in a SOHO environment. I have 2 X100P cards at Zap/1 and Zap/2. I have 1 TDM400P card with Zap/3 - Zap/5. I have subscribed to callwaiting, callerid and calleridcallwaiting from Qwest on the 2 PSTN lines - Zap/1 and Zap/2. My problem is when I'm in an active call to the outside thru Zap/1 or Zap/2, I can't pickup the incoming callwaiting call. I can see the

Hi All, Got a strange (at least IMHO) issue that doesn't make much sense to me. Basic configuration is two sites with a site-to-site (aka router-to-router) VPN. Both sites have Cisco 7961G phones [with SIP firmware] on users' desks, and the only VoIP is internal - all of our outward telecom is on POTS or Centrex-enabled POTS lines. Site 1 has a Dell PowerEdge 1950 with Asterisk built

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

Hi I am setting up an Asterisk System in an office environment, Incoming and Outgoing calls are working ok, but i am having a few strange problems regarding call waiting. With the SNOM 200 (firmware 2.02t) phones, if you are on a call and a 2nd call comes in, the call waiting beep is played and the light flashes, but if you hang up the 1st call, instead of the phone ringing, it connects the

Hello. After doing much web searching and searching archives of this mailing list, I see that my question has been asked at least 6 separate times but no answers have been attached. In a nutshell, is there a way for a SIP phone to easily hook flash a ZAP analog trunk mid-call? (This is important when trying to make use of features on a PSTN analog line such as call waiting, call forwarding,

Hello, After much searching of voip-info.org and google, I'm finally giving in and asking the list. The setup I have is this:- Single X100P card in a Debian system Inbound/Outbound POTS line connects to the X100P Sipura 2000 and Budgetone 100 on the LAN 1 Cordless and one conventional phone connected to the sipura Account on Stanaphone.com for eitherbound SIP calls. (I have other SIP