similar to: Aastra 9133i and NAT: Can it work?

Hi all, So I have been reading through the docs available online and the different threads on this list, but I cannot seem to get this phone to work. I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see attached), when I configure the phone to point to my tftp server and reboot it I get this message: Connection received from 10.6.0.224 on port 50608 [09/02 12:16:11.750] Read request

Hi, I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go up to 7.5 However in my first attempt to go from V.5.1 to 6.0 this is hat happens: - The phone reboots - The phone then reads the file OS79XX.TXT from the TFP server. In the file I added the version "P0S3-06-0-00" - It starts upgrading firmware - Then I get the following message: (Upgrade Failed -

Running those versions of code, my 7960 will not register with Asterisk. The same 7960 is authenticating against another * server on line 2 just fine though - with the same settings in sip.conf. On the failing * server I am just getting 401 unauthorized errors on the console. From the phone's shell I get that t is registering, but not authenticated .1. from show reg. Any ideas would be

I am trying to convert my 7905G to be SIP based and seem to be running into a few hassles. Below are all the config files and logs from the server. I have tried to follow the pdf's from cisco and some posts from other mailing lists that google turnedup, but it seems that nothing is working. Am I somehow missing a fundamental step in trying to upgrade from Call Manager to SIP? Any help is

ala cisco 7960 -----Original Message----- From: Matt Schulte Sent: Thursday, December 16, 2004 10:34 AM To: 'Paul A Brown' Subject: RE: [Asterisk-Users] Cisco 7960 (SIP) hold problems Sure thing, the biggest problem I had was getting the SIP filenames working correctly for updating the firmware (blah, I love Cisco but these phones are a joke for support). This works for me! Good luck.

Hi, I have about 10 Cisco 7960s behind a PIX 506E (IOS v6.3) firewall. After some period of time, asterisk says that some of them are unreachable, and the phones lose their registration. The only way to make the phones recover is to clear the NAT translation tables for the phones on the PIX (clear xlate...) Does anyone know how to fix this? As you can imagine, it is quite annoying. And it does not

I have Asterisk version 1.0-RC1 running on Debian Woody. I have 1 analog phone working, 2 inbound lines working, X-Lite is working. The problem that I am having is with Cisco 7960 with SIP version 7.2 software. I can make outbound calls and they work fine, I even get a notice that I have voice mail on the phone and it seems to register properly but I can seem to dial to the phone.

I need to set up an office full of Cisco 7960 phones behind NAT with the server out in Colo. The first test phone registers fine, but the second one does not register. The first phone's registration looks like so: /SIP/Registry/3115552368 :64.169.xx.yyy:38836:3600:3115552368:sip:3115552368@64.169.xx.yyy:5060 When the second phone tries to register, it gets back a 404 not found. Not a

I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone will receive the next inbound call. The phone will not receive another inbound call until a call out again from it first. Any ideas? I am using SIP and am using the latest

Hi, I'm experimenting with the dev kit lite and now past the USB unpleasantness it's working great with standard phones and lines. The priority right now is getting soft phones (under Windows XP) working well. So far, I've only been able to get the XTEN Lite phone working and I really don't understand how I set it up. I used "xten" for every option everywhere (display

Hey - I know there's some other people out there that have the 9133i ... has anyone gotten the DTMF tones to work after the far side picks up? I didn't have any problems out of the box with my SPA-841 phones... the aastra has been nicer so far, but I can't seem to get it to dial the touch tones after an auto-answer device picks up on the far side... I googled, to no avail. -Karl

I cannot get incoming calls to sip phones behind a PIX to work, outgoing is fine. Asterisk (Public IP) --> Internet --> PIX (NAT) --> Sip Phones I have tried no fixup protocol sip, I have punched a hole in the Pix allowing anything from the Asterisk box into the network, still no incoming. I have done all the Wiki suggests in regarding to NAT. Is their a trick getting the

hi i've got an AAstra 9133i ip phone, when i've bought it, i've set it to use a SIP/400 account on my asterisk, then, i've changed settings and i've set set phone to use a SIP/500 account . now, when i connect the phone to tthe network, it register itself on asterisk with both accounts!!! -- Registered SIP '500' at 192.168.100.188 port 5060 expires 120 --

Is it possible to control the light on a programmable button without the blf option? I'm using a programmable button to turn call recording on and off and I would like the light to indicate the status. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 david at safedatausa.com

I have an *ipphone 7965G* which has to be connected to Asterisk. It has been flashed with SIP firmware but the config file doesn't seem to work maybe I am missing something in it. I appreciate it if you can share your working sample config file with me. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

I have used Grandstream phones for years, and have just started testing a Cisco 7940 (with SIP firmware 7.4). I have found something puzzling and don't know whether it's just a limitation or something I haven't done correctly. The Asterisk server is directly on the Internet with a public IP. The phones are on a private LAN with a NAT router to the Internet. The sip.conf entries for

Hi All Total noob on the list so all help appreciated.... I've successfully installed Asterisk on an IBM A30P Thinkpad using fedora Core 2 (I'm looking at having a mobile PBX for conferences and shows). I've plugged in two Cisco 7960 phones.... The phones register with the Asterisk correctly and I can run the demo's and even the AIX demo through to digium works correctly.......

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the 480i

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the