similar to: Fax with Asterisk and Sipura 2100

I am wondering if anyone has sample XML config for the Sipura 2100 ATA. We have been autoprovisioning our 2002s with success and the 2100's take the same XML that we have come up with, but I am not sure of the syntax for specific things that I need these boxes to do, such as turning T.38 on. If anyone is willing to share their xml for autoprovisioning Sipura 2100's, it would be much

I'm really trying to understand this. I have a Sipura 2000, brother MFC, and SpanDSP set up on asterisk. because asterisk softfax was not working well, i set up faxes to goto line2 on the sipura. this is working fine, i have only tested a few short faxes, but already my completion rate was 100% vs 5-10% that spandsp and asterisk gave me. here's the odd part. using the fax machine, I

Hi there, I have bought 70 sipura 841 phones for a customer of mine. When following the mass provisioning guide in the admin manual for the sipura, I see it download the spa841.cfg file from my tftp server Sometimes the phone also downloads is phone specific file via tftp, and it works okay then. But, after a reboot of the phone, it is very very likely that it won't startup

I wrote a week or two ago about a problem I was having with a TDM400P with 2 FXS. The problem was reliable fax transfers. There were often slow or had communication failures during transmission. Richard replied to my post and told me this is an ongoing problem that might have a solution in the weeks to come. However, I was wondering if anyone had any alternate solutions for faxing with an

List, how can I put fax server functionality on Asterisk? * as a reliable fax server for 500-1000 fax/day (mostly incoming)? Fax server should be like HylaFax, i.e. stable, low maintenance and functionality like receiving fax as email with PDF attachment, sending faxes per WHFC. Faxing with spandsp using bri_stuff (BeroNet/Junghanns quadBRI ISDN cards) shortens some faxes, or faxes loose lines,

hi: Just starting out with *, and I'm planning to heed the advice to start simple and small, but the goal i'm aiming for eventually is: *-based pbx for 10-20 seat small business, based in the UK. Users will have PoE SIP hardphones. So far so good, but two questions, both UK-specific, relating to connection to the outside world (PSTN or VoIP): - are there any UK-based VoIP providers

I've just made an interesting observation that I'd like to share with you all: the popular Sipura SPA-2100 just doesn't seem to be as great as I'd hoped. I've been trying to get inbound AND outbound faxing working via Asterisk and at least one of my termination services: Voicepulse or Sixtel. In general, inbound has been working flawlessly but outbound has been pretty

Hi Friends, I have successfully implemented Intercom, Voicemail and International dialing using Asterisk. Now I want to connect my PSTN Lines to Asterisk server. I have 3 PSTN number (lines) to connect to Asterisk. For this, I want to use Sipura SPA-2100. Is my decession is correct or not? Is there any disadvantages with this Sipura SPA-2100? Please tell me. Thank you. Regards, Chandramouli

Hey, anyone know if it's possible to receive faxes through a Junghanns bristuff quadbri card? In germany, currently I have faxes coming in on DID line into QuadBRI and then passing to Digium TDM400 (analog) and into faxmachine. But the reliability of TDM card is spotty, so I want to maybe just accept faxes in on ISDN card and save on asterisk system ...? keeping digital signal strong ...

Does anyone have some decent Nagios scripts out there that do more than monitor the proc itself? Rather than reinvite the wheel, figured I'd ask. I already saw the one on the wiki. Matt

We are doing this with the latest spandsp, iaxmodem and hylafax. Seems to work very well for us so far. -Jonathan > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Michael Gaudette > Sent: Tuesday, March 21, 2006 3:34 PM > To: 'Asterisk Users Mailing List - Non-Commercial

I have an analog phone connected to a Sipura 2100 which in turn connecteds to * over a 100mbps LAN. When I do ChanSpy on a bridged call, it causes massive jitter. When I attempt ChanSpy with a Grandstream GXP-2000 the monitored call is clear. Has anyone had this happen? Any suggestions? ScriptHead

Need to replace our older soho fax machine with something more current. Would like to run the fax line through *, but haven't been able to make spandsp work correctly with digium TDM04b card. Our fax volume is very low (maybe a few per week), but we have multiple offices in three geographic locations and would like to be able to email the images to the correct location. For planning purposes,

Hi, I've found approximate same pricing for both. Sipura 2100 seems to have more features... What are differences between those two ? What about their reliability (specially regarding fact, that they deal with analog phones) ? Thanks in advance, regards, Rob.

I have installed two Sipura 3000's on my office pbx as a test, they work well an have some great features including fax detect, but I was hoping to allow incoming faxes on the FXO port to be detected and passed through to the FXS port. Am I mistaken or does this work, and how? Chris Mason Anguilla

I'm setting up a small office PBX on asterisk, and I've got to the point where I have to decide on what to do about FAX. The current situation is: PRI (E1) connected to an E100 and sip hard phones on their own network. I'd like to add some very limited fax capability to the system. Basically we need to send a couple of faxes a month, and receive about the same number. My options

My boss is insisting we support fax, and I keep telling him that Fax over IP is very unreliable and not recommended and his immediate come-back is "Vonage does it." and it's very hard to figure out how. I don't think Vonage does T.38, the Linksys/Sipura units they're using doesn't support T.38 to my knowledge. That means they have to be using G.711Ulaw to send faxes.

Ok, ok, I know there has been plenty of discussion on asterisk and fax - from this I understand: 1) First and foremost, use g.711 ulaw 2) Packet loss, etc...makes faxing over the internet unreliable My need is for a fax to come in on a X100P and be forwarded to a fax machine on the local lan. I don't currently have any fxs as I'm using all sip phones at this point. I see the

I'm currently using the Linksys PAP2, and since there's a shortage I'm looking for different devices. I'm mainly looking at the Sipura SPA sets since they are the base of the pap2. Anyone else have experience using them, and which one? Thanks Sherwood McGowan -------------- next part -------------- An HTML attachment was scrubbed... URL:

On Saturday, April 15, 2006 3:17 PM Remco Barende wrote: > I heard that Junghanns is working on such an interconnection. It is > already possible to connect their PRI cards, and they are working on > BRI<->PRI. Correct. The next driver generation is supposed to support this fully. > I ise their bristuff for an HFC-S BRI card and am not happy at all > with the way they