similar to: GXP-2000 fw 1.0.1.13 and NTP

Greetings all Grandstream released a new firmware and it seems like the speaker phone problem has been fixed. However we updated to firmware 1.0.1.12<http://1.0.1.12>to fix the echo problem but found other problems were now created. The worst of these new problems is that the whole phone starts degrading, the volume starts getting lower and lower. The ringing starts fading and the calls

Hi folks, Just a quick question. Does the GrandStream GXP-2000 phone support presence (hints)? Cheers, Richard. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060109/26c4a63c/attachment.htm

Does anyone know the secret to get the GXP-2000 Message waiting lamp to illuminate? Or can point me toward some docs that might explain it? Thanks! --Jeffrey -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060501/7ffc668f/attachment.htm

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

I am running ntpd on the same machine as asterisk in order for the grandstream phones to display the time. After a while the time display fails until the phone is re-booted. Has anyone run into this problem before? Is it simply a bug in the GS firmware? Sean

I have 5 GXP 2000's with firmware 1.1.4.25 running with Asterisk 1.4.13. Is anyone else getting the following error in the asterisk console: [Oct 22 11:39:01] WARNING[7100]: rtp.c:1142 ast_rtp_read: RTP Read too short every couple of seconds when a handset is in a call? I didn't notice this happening when I was using an older GXP2000 with the same firmware (doesn't mean that it

Is it possible to program the multi-purpose keys on a GXP-2000 remotely via a TFTP configuration file? If so, what are the parameters to put in the configuration file? Thanks, Daniel

Currently, my time server is a Sun v240 with a 32-pci gps card (with a proprietary Solaris driver) attached to our gps receiver via an sma cable up to the roof of my building. As I'm migrating almost all of our Solaris servers and services over to CentOS, I'd like to know what other people are using for time server hardware. Any suggestions? -- Andy Harrison public key: 0x67518262

I have about 30 GXP-2000 phones running 1.0.1.9 which have all been configured using the provisioning feature so the configuration is all identical. The problem I am having is that they randomly seem to stop registering with asterisk. When they stop registering they can still make calls but oviously asterisk cannot ring the phone so all incoming calls go to voicemail. Has anyone else had similar

Hi all What headset do people use with the GXP-2000? Any recommondations for or against particular models? Thanks Peter -- Peter Bowyer Email: peter@bowyer.org Tel: +44 1296 768003 VoIP: sip:peter@bowyer.org

Hey I would like to add the URL http://www.pool.ntp.org/ to the wiki entry TipsAndTricks/Server_Time so people can find different servers to tick.usno.navy.mil Just something like: If you don't want to use navy.mil you can find a ntp server near you under ... Comments? Cheers Didi -- Hoffmann Geerd-Dietger http://contact.ribalba.de

I had provisioning via tftp working on this phone. I have verified that after the firmware upgrade, it contacts the tftp server and downloads the cfgMACADDR file, and the ring/etc files successfully. Unfortunately, changes made to the config file don't make it to the phone (SIP account info/server info, etc). The script that I am using to generate the binary files is loosely based on

Hello, At a client site yesterday I installed a dozen GrandStream GXP-2000's with 1.1.0.13 firmware but I had to backtrack and reactivate the old PBX and phones: network access for users windoze PC's through the phone's switch port was unbearably slow, making it almost impossible to work. When plugging back PC's directly to the LAN speed was normal again. On my test setup

In case it hasn't been posted before, here's instructions to get the correct time to show up on your Grandstream GXP-2000's: 1. Login to phone 2. Go to Basic Settings tab 3. Change Daylight Savings Time to yes 4. Change Optional Rule to 3,2,7,2,0;11,1,7,2,0;60 (this means change clocks the second sunday of March and back again the first sunday of November - i.e., the new savings

Hi, We have phones registered at another soft switch, and would like to use Asterisk as a Voicemail system. Is it possible and how to configure Asterisk to send NOTIFY messages (for MWI) to the endpoints that are not registered to the Asterisk? Regards, Stojan Sljivic -------------- next part -------------- An HTML attachment was scrubbed... URL:

Greetings all I was wondering if any of you have found this problem. I have a setup with 80 GXP-2000s which work great until I decide to stop now my asterisk server. When it comes back up half of the phones (not always the same ones) fail to register with Asterisk. I set up the phones to register and send keep alives (register every 4 minutes, send keep alives every 20 seconds) to no avail.

Anyone used the new Grandstream GXP-21XX series phones. We have been testing these phones and like what we see. We are looking for a greater cross section of testing before we roll them to production. Any feed back would be appreciated. We are talking with Grandstream engineering and they are looking for feed back as well. Any input is appreciated. Thanks Bryant -------------- next part

Is anyone else having an issue with GXP-2000s and transmit gain? All my other phones are fine on my TDM400P with txgain set at 0, but the GXP-2000 caps at about a third of the scale in ztmonitor. I'm getting people complaining they can't hear me on my GXP-2000s, whereas my Snom 320 and Polycom 301 are great, and my Budgetones are overmodulating. Is there any conceivable fix on the

Hi, I have a lot of GXP-2000 phones not registering with Asterisk server. After two days of attempts, it seems that problem is due to the fact that phones and server are not on the sme network. Do you know if this is known issue? -- Domenico Viggiani