similar to: Sending ANI over SIP

I've recently noticed some oddities in my CDR records. In some cases the original CallerID that I've set in the .conf file for the extension showed-up in the CDR as the originating extension (on Zap/ devices on the channel bank), and in other places it was the one that I set using Set(CALLERID(num)=<something>) (SIP/ devices). Digging around a little in the source (and doing some

Hello All, I'm having problems with international calling via Global Crossing. I'm told I need to send a true ani versus a sudo ani. What is the difference and how can I configure asterisk to do this. Global Crossing is denying calls with sudo anis. Thanks, Keith

I am in the process of building up an Asterisk-based voice network using PAP2-NA SIP clients from Linksys. Our network consists of several disconnected private networks (unaware of each other), and are all proxied out to the Internet via a Linux server. Our Asterisk PBX lies on the Internet on yet another network. I'm hoping to get all SIP clients (PAP2-NA's) to register at the central

Hello, We're having some issues with CallerID and I thought someone here might be able to shed some light as none of our carriers seem to know what I'm talking about. The issues is this: A client of ours uses an after-hours voicemail service as mandated by their corporate office. We have a Day/Night setting that lets them turn this on and off. A call comes in from one of their

Okay went to: http://wine.dataparty.no/ form there downloaded the rpm, http://wine.dataparty.no/rpm/unstripped/wine-cvs-unstripped-013001-1.i386.rpm downloaded the config file and worked through the install guide. I edited the config file to mirror my window setup: c:\ = \mnt\c d:\ = \temp e:\ = \web f:\ = \documents g:\ = \music h:\ = \mnt\cdrom i:\ = \mnt\zip then as a check did $wine -v and

I receive calls over a T1 with callerid and then *ani*dnis*. I am able to strip out the ani and the dnis in the dialplan but when I try to set the caller ID to be the ani, it looks ok but then if I do a NoOp callerid on the next line, I get unknown. Here is the section of my dialplan: exten => _*NXXNXXXXXX*NXXNXXXXXX*,1,Set(ANI=${EXTEN}) exten =>

Yes its a T3 split into seven trunk groups with one D channel and NFAS on each. Can you explain the cut function or point me somewhere please? Thanks, Steve -----Original Message----- From: Alexander Lopez [mailto:Alex.Lopez@OpSys.com] Sent: Mon 4/10/2006 12:51 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Subject: RE: [Asterisk-Users] ANI and DNIS Seperation on

Hi All, My research indicates ANI is not really supported with SIP Channels or passed between SIP servers, even with setting function CALLERID(ANI). So the only place this applies is on PRI interfaces, when sending calls out a ZAP PRI you can set the ANI to whatever and CID Number to a different whatever so on the other end of the PRI you will receive the two different values? Is this correct or

I've got an interesting problem. I just recently upgraded an asterisk server from a may 9th cvs to a 9/29 cvs. When I did the upgrade I was unable to place calls through the PRI. The calls would process fine, but the provider would reject the call and send me a cause 69 or 77 failure code "Unallocated (unassigned) number". Upon contacting the provider, they told me I was

Good Day list, Need assistance determining the best place to read up on whether Asterisk can help me out. I have a situation where I need to do the following <PRI from Telco> ------- <Analog Channel Bank>------------<Proprietary Box> | | | | | | <PRI Port 1 of Digium Quad T1> <PRI Port 2 of Digium Quad T1> | | | | | |

Can someone in Asterisk'land subscribing to 800 service explain to me how to setup extension.conf to route calls based on the incoming DNIS/ANI. For example I want to route 3 incoming 800# coming across a trunk group to all land in the same queue. So I guess I am asking how to perform DNIS/ANI based call routing? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, does anyone of you have made it to get the ANI also picked up? I mean: if I fetch a foreign call to me by using the pickup application I want to see the callerID/ANI of the caller to the foreign extension. Is that possible and if yes - how do I achieve that? Regards, Christophorus

Hi folks, I know this isn't an Asterisk question, but I'm really desperate and wondering if someone could help me. I apologise for the off-topic post. Cisco phones connected to CallManager can forward calls. But when they do, CallManager conserves the originating caller's ANI in the new leg that is built. I cannot find a way to get it to rewrite the ANI to be that of the phone.

For our application we want to read the callers number back to them (calling in on a 800# that would somehow point to multiple lines -- figuring that all out still). I was under the impression that calls to 800#'s are unblockable by the caller (irregardless if they have caller id blocked or not). I'm not sure if this is because of ANI or CLID (or if ANI _is_ CLID) or how any of this

We are using TDM40B's to connect some devices to Asterisk which depend on caller information arriving as ANI, rather than as Caller ID. I am unsure if the TDM40B supports this in the first place, and if so, I am unsure how to configure it so. I've searched the wiki but couldn't find anything. Can someone please confirm whether or not this is possible? As a fallback I could reconfigure

OK I am going to do it again. Global Crossing is now sending ANI but it is not in the format I expected. Any one know of a way to get this data into two seperate variables? The first number is ANI and the second is DNIS so it is "*tendigits*tendigits* on one line like below. < Called Number (len=26) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan

Is there a setting somewhere in * to define whether I am receiving callerID or true ANI? Global Crossing claims they are sending ANI but I dont think so. My understanding of ANI is that it is always sent, regardless if callerID is blocked. If I dial *67 and my DID, I get "Presentation: Presentation prohibited of network provided number" and no number. Before I call GC on Monday

Hello, Being totally fed up with the lack of quality and reliability from both VoicePulse and BroadVoice, We are switching to a direct IP connection to Global Crossing. We've installed a local point-to-point T1 into their CO, and they will give/take SIP g729a directly and act as the gateway for us. In setting up the inbound SIP service, they are asking the question, "In what format do

does anyone know how to route a call coming in with ANI*DNIS* Oct 31 12:47:41 VERBOSE[30056] logger.c: -- Executing Set("Zap/49-1", "DID=1231234*4812*") in new stack I tried making a route for _.*4812* but that matched everything rather then just the dnis i wanted.. any ideas? I would preferably like pass the callerid along to my extensions, but for now the important

Quickie: Does anyone out there have experience with PRI delivery of ANI II information? Specifically, I want to know if it's possible from within Asterisk to know if the inbound call (which may or may not be to an 800 number) came from a payphone or not. I know with some 800 providers it's possible to block inbound calls from payphones (due to the FCC surcharge etc) but was wondering how