Displaying 20 results from an estimated 10000 matches similar to: "WCFXO and T1 PRI Card?"
2005 Jun 07
3
AAH 1.1 - CRM Setup
Hello All,
Has anyone successfully gotten the Click to Dial to work in SugarCRM in
the latest AAH?
I keep getting 'Invalid Channel' but I cannot figure out why.
Thanks!
Wiley
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050607/b18b3743/attachment.htm
2005 Mar 10
3
AAH 0.06 - IAX Connection Over NAT Firewall
Hello all,
I am having trouble getting my IAX based Voip provider setup. Any pointers are welcome.
So here is the deal. I am registered up and I can make outgoing calls but incoming calls fail.
Configs all look good I thought.
My PBX is behind our firewall with a direct NAT of one to one for an external IP.
IAX port is forwarded UDP and TCP to the internal IP.
* shows good registration and
2004 Oct 05
2
problems with X100P - Nochanneltyperegisteredfor 'Zap'
This may seem obvious or silly but have you tried using a different
phone cord?
A bad phone cord played havoc on a colleague of mine during initial
config.
Fro what you show as your output from ztcfg, you should have one channel
configured successfully then.
Your example shows you have the channel set to one so no problem there.
If you run ZAP SHOW CHANNELS from the CLI what do you see?
W
2005 Mar 11
7
Sip show registry returning nothing
Hello all,
For some reason I am not showing registration in SIP.
Can anyone give me an idea what can cause this?
asterisk1*CLI> sip show registry
Host Username Refresh State
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050311/bd3a7577/attachment.htm
2005 May 13
3
Other memory stuff
On a similar note, I have a server with 1GB of memory that seems to
never release the memory back to system use.
The system is AAH 0.9. Dual AMD Athlon.
This system does IAX out ot my voip providers and has 2 TDM400 cards in
it for connection to my POTS lines.
I never have more than 10 calls active at a time. There is no
transcoding. It is all uLaw.
Does anyone out there have a problem where
2004 Oct 05
1
problems with X100P -Nochanneltyperegisteredfor'Zap'
You should see something like this.... (I have 8 channels)
tuxpbx*CLI> zap show channels
Chan Extension Context Language MusicOnHold
pseudo incoming en
1 incoming en
2 incoming en
3 incoming en
4 incoming en
5 incoming en
6
2005 Mar 04
1
defold usernames in asterisk@home version 6
OK. So check out the Wiki here....
http://www.voip-info.org/tiki-index.php?page=Asterisk
The archive of this list can be search via google by entering...
site:lists.digium.com <some parameter>
www.digium.com has a link to all the materials for getting started in
the Documentation section of the website. Those are really quite good
so I would start there. Most were written prior to
2004 Oct 05
1
problems withX100P-Nochanneltyperegisteredfor'Zap'
For reference...
http://www.voip-info.org/wiki-Asterisk+zap+channels
Not sure it is relevant but go ahead and remove the spacing on the
channel line so it will read....
channel=>1
Here is the original incoming context you showed.
[incoming]
exten => s,1,Answer ; Answer the line
exten => s,2,Playback,demo-thanks ;for playing a file
The Playback looks malformed based upon the wiki
2005 Mar 11
8
No ringback over IAX - LiveVoip
Hello All,
I saw some coverage of this in the list archive but no one seems to have
posted a resolution.
I am using Asterisk@Home 0.06 and when I get a call from LiveVoip over
IAX I dump it into my IVR.
>From there the call is routed to groups based upon input.
However, there is no ringback indicated to the IAX caller.
Does anyone know how to resolve this problem?
Thanks,
Wiley
2004 Jul 20
10
Installing X100P
I attempted to install an X100P card but it was not correctly recognized
by my Redhat 9 install. I had a test install running without any cards
which was working great minus the outward dialing since no cards
existed. Now that I have a card, I want to add it to the system. Do I
have to scratch the whole current install in order to get the X100P
running on my system or is there a way to get it
2005 Mar 16
9
IAX Registration being lost
Please check the Wiki (www.voip-info.org) and the list archive by
Googling site:lists.digium.com <search string>
Also, please include some more info. That is probably why you got no
answer...
Is your machine sitting behind a router or is it directly connected to
your broadband (assuming)?
If the machine is behind a firewall, the IP change should not be so
profound.
It would just take a
2005 Feb 28
2
Fax Failing
Hello All,
I am trying to set up faxing using Asterisk@home 0.6. I have followed
the instructions to the best of my knowledge. When a fax comes in, the
system seems to detect OK but does ot manage to make the fax to pdf to
email leap. Here is what I saw in the CLI when I tested. Any help
would be appreciated.
Thanks!
Wiley
-- Starting simple switch on 'Zap/2-1'
-- Executing
2006 May 27
3
TDM
The TDM01B is 4 port capable but has only 1 FXO module. I'm running asterisk
1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B working. When I do
the zttool it shows 4/1/0. I can dial out from a POTS phone up to the point
that the cable plugs into the card.
Here is my /etc/zaptel.conf
loadzone=us
fxsks=1
and here is my /etc/Zapata.conf
[channels]
language=en
#include
2005 May 12
14
voipjet anyone?
Is it me... or is it voipjet?
This week I've been trying various providers, just can't seem to get
voipjet to work.
I signed up with voipjet but so far can't get it to work inbound or out
bound.
I always get 'all circuits busy'.
May 12 22:27:05 VERBOSE[2442]: -- Executing
[1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m",
2008 Mar 27
3
problem about voice when using TDM2400p with VPMADT032 echo canceller module
hi you,
I'm having problem with voice quality on my trixbox using TDM2400B.The trixbox is connected via 20 FXO ports on a TDM2400 with the hardware echo cancel module. Echo cancel almost works, but the users hear what they describe as a 'background crackle/buzz' coming back when they talk.
anyone have the same problem? pls help me. thanks a lot.
my trixbox and config
2003 Nov 05
1
Beginners help
Hi,
I recently purchased two X100Ps and a TMD40B. I have set everything up
according to the instructions however I can't get asterisk to pick up an
incoming call (It just keeps ringing). Also, when I pick up an internal
extension I get dead air. I searched the mailing list for 3+ hours -- What
am I missing?
Thanks in advance for your help.
Here are the installion steps that I used:
2005 May 10
2
AAH 0.9
Is it possible to use the outbound routing features of AAH0.9 but also
allow a user to dial a prefix to force the use of a certain route?
Thanks,
Wiely
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050510/0c261294/attachment.htm
2005 Jul 22
1
Problem with Zaptel FXO..
Hi all, i've installed AMP and Asterisk following the INSTALL file and i have
a problem with the TDM04B with 4 FXO:
[root@srvoip ~]# ztcfg -vv
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default)
2005 Jul 01
19
Epia C3 Linux
Anyone know a good distro for an Epia Mobo with the C3 chip?
I have been trying to get Debian and Gentoo installed (new to me) and so
far having little luck.
Does anyone know a good install for this processor/mobo combo?
Thanks
Wiley
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2008 Apr 14
4
Unable to load module chan_zap.so
I am having trouble with chan_zap.so not loading. When I load it from
modules.conf, Asterisk bails out without any error message. When I
load it from the console, it just says "Unable to load module
chan_zap.so" no matter what verbose level I am using.
dmesg says:
Zaptel Version: 1.4.4
Zaptel Echo Canceller: MG2
Freshmaker version: 73
Freshmaker passed register test
Module 0: