Displaying 20 results from an estimated 1000 matches similar to: "Echo Cancellation not working in Zapata.conf"
2007 Jul 17
5
Zap channels unavailable?
Hi,
Lately we've noticed that some Zap channels on one of our PRIs are
unavailable. We have 2 PRI lines with 60 channels in total. On the first
PRI there are currently 20 channels that are not being used for some
reason.
I tried googling around and found some similar problems but there really
was no solution (?). I'm not sure if this problem has occured now
because of more load on the
2008 Oct 20
1
Zaptel FXO offhook when connected to PSTN
I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having
an annoying issue with the FXO ports. As soon as I plug either one into the
phone line it's as though the line is disconnected i.e. get disconnected
tone when trying to dial out, line is busy when dialling in.
The CLI shows the following:
trixbox1*CLI> zap show channel 4
Channel: 4
File Descriptor: 18
Span: 11*
2005 Jun 28
0
BRIstuff/OctoBRI problem: Ring requested on unconfigured channel 255/255 span 5
Hi all,
I just posted this question before last week.
Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to
1.0.8-BRIstuffed-0.2.0-RCh
the same problem occurs, but seems to be more seldom.
Attached is now the output of "zap show channel" .
-
I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM
equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.
2008 Nov 11
1
What makes TDM400 FXS Connection to TELCO go into Off Hook State?
I've been having trouble with making outbound calls to my
TELCO from a TDM400 card (FXS KS signalling) after upgrading
from 1.6-beta9 to 1.6.0. The problem is completely intermittent.
When it fails, I get this message:
[Nov 9 19:12:26] WARNING[18916] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
At some point, it starts working, but I don't know what
2005 May 27
1
Unable to create channel of type 'Zap' with zaphfc driver
I new in asterisk world so, please, forgive me if I say something stupid.
At least, and after a lot of tryes, the isdn card seems to be registered:
[chan_zap.so] => (Zapata Telephony w/PRI)
== Parsing '/etc/asterisk/zapata.conf': Found
-- Registered channel 1, PRI Signalling signalling
-- Registered channel 2, PRI Signalling signalling
-- Automatically generated pseudo
2004 Jun 07
4
Modem Calls
My office is investigating using an Asterisk PBX and also going to a VOIP
provider for our main phone connections, but one of the tricky things is that
we need to have outbound and inbound modem calls (fax too).
I see a lot of talk about faxes but no mention of modems on this list. I get
the impression that modems will be a problem for us. Is that true?
2009 Aug 17
0
Echo on TE121B with hardware echo module
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
I recently upgraded my Asterisk system to Dahdi and now I have an echo
problem.<br>
<br>
I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium
TE121B PCI express card with a HARDWARE echo
2005 Aug 12
3
TDM400P FXO channel hookstate always "Offhook" & outbound digits sent before provider dialtone
I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a
TDM400P with (1) FXO card on port 4. Inbound calls are always successful
but outbound calls fail 75% of the time with intercept messages from my
dial tone provider that include "we're sorry, your call did not go
through", and "we're sorry, when placing a local call it is now
necessary to dial an area
2006 Apr 04
2
Any Aheeva Users?
Just looking for unsolicited thoughts on the Aheeva product? Anyone
have anything to say?
Thanks,
Steve Totaro
http://www.asteriskhelpdesk.com
2009 Sep 27
2
DAHDI congestion problem
I am unable to dial out over a Wildcard TDM400P. This was working previously, so must have
messed up the config somehow. I'm running Asterisk 1.6.0.15, with FreePBX 2.5.2.2.
When I dial, I see:
-- Executing [s at macro-dialout-trunk:19] Dial("DAHDI/1-1", "DAHDI/g0/9239220,300,") in
new stack
== Everyone is busy/congested at this time (1:0/1/0)
It looks like the
2010 Mar 18
6
Asterisk DIES with no trace. PLEASE
Thanks Zeeshan,
SAngoma told me that the asterisk problem is unrelated to wanpipe drivers,
they told me to reinstall asterisk again
But, i still having doubts about the problem :(
Thanks in advance
>
> Message: 10
> Date: Thu, 18 Mar 2010 00:21:06 -0400
> From: Zeeshan Zakaria <zishanov at gmail.com>
> Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE
>
2004 Jul 11
1
Echo issues (again...)
OK... so I'm not sure what I'm looking at. I've had the good old echo
problems on my Rev C FXO again this morning, so I thought I'd attempt
some debugging, though I'm not sure what I'm looking at.
This call has echo.
Channel: 2
File Descriptor: 20
Span: 1I>
Extension:
Dialing: no
Context: incoming
Caller ID string: "External Call" <99999999>
Destroy:
2004 May 07
6
X100P keeping PSTN line Offhook
Happens quite often. X100P FXO card puts the PSTN line offhook, so that no
calls go out or come in. The outside callers get a busy siganl while inside
callers cant dial PSTN.
Its a DELL optiplex P3 128MB ram 500MHz processor.
Here is some more info: (see the zapata.conf in the end)
Please direct me where to look for problem.
Thanks!!!
========================================
pbx1*CLI> zap
2014 Jan 31
0
e911 Signalling
Hi,
We've got a dedicated T1 with two trunks running into our ILECs
selective router for 911. Split out of the T1 into two MF CAMA trunks
on ILEC side.
I'm trying to use asterisks e911 signaling, but I'm having trouble with
the dial command. (== Everyone is busy/congested at this time (1:1/0/0))
I'm missing something and I'm thinking it has to do with the hookstate
2010 May 07
1
DAHDI astribank Channel Unavailable
Hi guys,
This has been bugging me for days and I can't figure out what's happening.
Using the same channel on DAHDI, I can't make a call after previous one being hung up by remote side. However, it works like it should if my end hangs up the call. To make things interesting, DAHDI, or astribank rather, seems to "reset" itself after receiving an incoming call on that DAHDI
2010 Mar 02
6
Echo cancellation on DAHDI
Dear All,
How can we know the On board supports echo cancellation
I have *Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev
02)*board
all working fine but sometimes i got echo when user are calling a PRI.
is there any way to know on board echo cancellation .
regards
Dhaval
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2005 Jan 24
2
Wildcard TE405P and TDM400 - TDM not working
Im having a problem getting the 2 cards working together.
I added the TDM with 3 FXO and 1 FXS board.
The TE405p is working fine. THe TDM registers and identifies the FXO's
and FXS but cant get them to go off hook.
I hope someone can help.
Asterisk seems to THINK its dialing it sends manager status as dialing,
and it just sits there with no tones, on the phone dialing out.
If I dial,
2010 Mar 24
6
Restarting Asterisk using a script - Thanks to all -
Hi All,
I do have asterisk installed for a call center and I would like to know if
it is possible to create a scipt and execute it from a PC connected to the
Network without accessing the server. This script should restart asterisk
and another service related to aheeva.
The problem now is that each time I have to access using PUTY to the server
to start and run services manually.
Service
2010 Mar 25
1
configure the sound for inbound calls
Hello All,
I do have asterisk installed for a call centre with aheeva application and
i would like to know how to configure the sound for the inbound calls and if
there is any possibility for agent to receive a file with the phone number
and name of clients: For your information there is no problem related to the
outbound call
An help would be appreciated
Kind Regards
Salah.
--------------
2008 Oct 23
2
Hylafax asterisk iaxmodem problem
Hello all,
I have an asterisk box running in a customer with Hylafax, iaxmodem,
asterisk 1.2.18.
The service can receive faxes, from a lot of fax machines, but there
are a couple of them that asterisk Hylafax cannot complete.
This calls arrive the asterisk box, asterisk detect that this calls
are fax, asterisk answer the call, and then Hangup the call. But
hylafax do not receive nothing.
When