Displaying 20 results from an estimated 70000 matches similar to: "To get phone to ring in two or more places"
2005 Mar 29
1
Newbie question: How do I get Analog Phone to actuall ring
i am using the sample config files and get a dial tone. i have also
gotten it to play greetings etc, but i need the phone to ring so that
i am not tieing up the one phone line, please help, i know this sounds
insanely stupid but i cant get it to work.
2005 Aug 20
2
Ring more than two isdn phones simultaneously
I am using a HFC-S card in nt mode with zaphfc driver to connect an
internal isdn bus. I would like to signal an incoming call on, let's
say, 4 phones. Right now I use:
Dial(Zap/g1/21&Zap/g1/22&Zap/g1/24&Zap/g1/23&Zap/g1/29,,t)
where g1 are my two isdn channels provided by HFC-S card an the
21,22,etc my internal numbers.
When the command is executed however, only the
2014 Sep 18
1
Asterisk 11.9.0 PRI no ring indications
Hopefully someone can point me in the correct direction.
I had a 1.4x system die on me yesterday, while I was prepping a new machine to replace it. Took the machine on site yesterday and spent the day and part of the evening getting things working.
This morning, I finished up converting my dial plan, knowing there'd be calls of things that I missed.
While testing, I've noted that all
2013 Aug 18
1
Asterisk SIP Trunk between two Asterisk Servers
Hi,
Am making a simple SIP trunk between two Asterisk server,
Server 1
sip.conf
[usman02]
type=peer
username=usman02
secret=usman02
host=10.30.2.58
context=man02-trunk
port=5060
qualify=yes
disallow=all
;allow=g729
allow=g729
;allow=alaw
nat=force_rport,comedia
dtmfmode=rfc2833
relaxdtmf=yes
insecure=invite,port
extensions.conf
[man02-trunk]
exten => _1X.,1,Dial(SIP/usman02/${EXTEN})
exten
2007 Aug 06
2
ATA phones ring when they register
Hi,
I have an 8-port Grandstream GXW-4008 V1.2A ATA
converter with analog phones connected to it.
They work fine except for just one "feature" I would
like to modify. Somehow, each time the ATA
re-registers the SIP clients or each time the device
has to be rebooted for maintenance, the phones ring
once. This feature can be useful as it notifies the
user of the re-registration.
2009 Dec 25
2
SIP Incoming / Inbound not working for Broadvoice (Asterisk PBX 1.6.1.6)
Hello,
Please forgive me if I'm repeating this post. I have searched and looked for
similar problem with a solution but have not see a similar one.
My outgoing SIP and other channels work fine but the incoming/inbound SIP
call goes straight to Broadvoice voicemail. I see that Broadvoice is
registered when I look at the SIP registry. I have turned on SIP Debug and
it is below.
Anyone know
2020 Jun 30
1
POlycom phone not ringing behind firewall (401 permission denied)
Hi All,
I have polycom phones setup in an office connected to a cloud asterisk
server.
The polycom phones can call out just fine - audio just fine.
However a call coming into the cloud asterisk answers fine - get the
autoattendant, enter the extension and the polycom does not ring. The CLI
shows that the correct SIP extension is being Dialed (SIP/524)
Looks like I'm getting a 401 permission
2006 May 02
1
SIP trunk ring tone
Hi,
I'm wondering what I need to change to get the "swedish" type ring on a
SIP-trunk. When I make an inbound call i still have the "US"-type of
ring on my SIP trunks. I need help on changing this.
However I've successfully changed this on the Zap interface for all
inbound calls.
Thanks in advance!
Regards,
Jan
2005 Jun 15
1
Strange Inbound Ring Handling
Got a wierd one that's reminding me of a problem mentioned in an earlier
post but for the life of me, I can't find it. So...
Inbound calls via a Voicetronix interface on my Asterisk box are being
properly detected and routed to my dialplan as expected. It's a simple
plan right now that rings a few internal Voicetronix and SIP stations.
When the inbound line rings, it's ringing
2010 May 26
3
"ring splash"
Something new to me. Recently installed a 1.4.30 box for a small office
with four POTS lines in a hunt (Digium TDM410P). Had the telco put a
"call forward" option on the main line of the hunt. They dial a feature
code from their desk phones (Polycom IP450) that results in forwarding the
main number to our VoIP service. This is all to let them "try out" our
dialtone
2006 Apr 19
0
How to route all incoming calls on an analog trunk to a specific ring group
I have a customer that is using a digium tdm2400p card with multiple analog lines coming in. They want to be able to forward all calls on specific trunks to specific ring groups. I tried this with the inbound routing and specifying the phone number of the trunk and directing it to a ring group but this doesn't work. Maybe I'm going about this all wrong. Any assistance would be appreciated.
2007 Dec 07
2
Polycom 601 stops ringing
I have an odd issue, where a polycom 601 stops ringing, or more properly, maybe, stops *being* rung, when a call comes in. Other phones/extensions, continue to work fine, they being run at the same time.
My dial plan works fine (?) seems it will ring properly, right after a reboot. It works fine for outgoing calls at all times.
Hints?
joe a.
2004 Dec 21
0
fxstest cant ring phone, but asterisk can !
Hi all,
I cant ring my phone with fxstest, but all else works (playing tones,
stats , regdump).
My ring voltage is -53.7680 volts as reported by stats
option to fxstest.
However, I can ring my phone with Asterisk !!!
With fxstest, I just hear a click if I am off hook,
and ask it to ring my phone.
I am in the UK, and have a ring capacitor installed
to the fxs port.
Even without that,
2005 Aug 29
2
TDM400 and Phone does not 'ring'
I have a running * with a TDM40B board in it.
I have 3 analog phones that works (rings) perfectly when connected
to a Telco POTS line.
When connected to the Digium TDM40B (with FXS port), I have problems
with 'ringing':
1 phone 'ringes' normally
1 phone 'ringes' a bit cripled (instead of ring-ring... ring-ring..., it
does 'ring-ri... ri.... ring... ri...)
and the 3rd
2009 Aug 14
2
no ring tone
how do i troubleshoot no ring tone. It was working and all i added was the lines below now it doesn't ring.
Edit sip_nat.conf for proper NAT:
localnet=192.168.1.0/255.255.255.0 externhost=pbx.DOMAIN.com (Set your external hostname name here)
externrefresh=10
fromdomain=DOMAIN.com (Set your external domain name here)
nat=yes
qualify=yes
canreinvite=no
Add extra codecs to
2004 Dec 21
2
upgraded source now ata's ring but stop silence on inbound calls
I was doing a daily make update for asterisk. On the 19th the new version
compiled fine. I installed it. All of my ata 186's can call out to pstn etc.
All inbound calls, the phones ring but when you pickup, just silence both
local and remote with no complaints in the cli. I backed down to the r 1.0
1.0.3 on the 20th CVS-v1-0-12/20/04-18:24:52 it worked ok.
Yesterday I did a cvs update on the
2011 Feb 16
1
No ring tone on inbound call - but channel connects fine
Hi Everyone,
I have a SIP turnk which works fine with both inbound and outbound calling.
However, the only issue is that there is no Ring Tone if someone calls us.
The phones used are Aastra and Polycom connected to the PBX via VPN (SIP).
I do get an outbound ring tone, so it's not that there is any media loss
between the phones and the PBX. But when the DID is called there is dead
silence
2009 Jan 21
1
No Ring on Analog Phone using Rhino Channel Bank in China
I am testing analog phone and fax machine plugged into Rhino Channel
Bank which is connected to TE412P card. This site is in China.
I am running RHEL 5, Asterisk 1.4.21.2, Zaptel 1.4.11 and libpri 1.4.4
I ran into a problem which is analog phone can hear dial tone and can
make outgoing calls. Another phone (ether internal or external) can
call the analog phone ***but the phone does not
2005 May 13
3
2 minutes pause before ring on H323 channel
I have build asterisk from latest CVS HEAD-05/09/05 with H323 support as described in README file.
Open H.323 version v1.17.1 and PWLib v1.9.0 on Mandrake Linux 10.2 kernel-2.6.11
I tested it with following phones:
-- XLite (SIP softphone)
-- QMix SIP IP phone (PA168F)
-- SJPhone (H323 softphone)
-- QMix H323 IP phone (PA168F)
-- FireFly (IAX2 softphone)
Everything works fine except a problem
2004 Sep 29
1
Call waiting does not ring phone
Can someone please tell me if this is how call waiting should work?
ZAP/1 and ZAP/2 are X100P on phone lines
ZAP/3,4,5 have phones conected.
If a call is in progress between ZAP/2 and ZAP/3 and
ZAP/2 gets a callwaiting signal which ZAP/3 hears
the Dial command has SIP/2002&ZAP/3&ZAP/4&ZAP/5
If ZAP/4 is off hook, I hear the call waiting signal
The CLI says it is ring the 4