similar to: Moaning dog...

It's happened before, cleared up and now it happened again. The IAXy, working for a total of about 6 months. Symptoms: Registered with asterisk and even receives calls (the LED shows it's ringing) but phones connected to it are dead. Same phones work connected directly to the phone line. Cable swapped out, no difference. Endless re-provision (with normal looking output) and power

Just so others know. On my EVGA motherboard the option to boot removable media didn't work on my usb flash drive with syslinux on it. Yesterday I tried updating the version of syslinux and seeing if that would wok. Frustrated with it not working I moaned and groaned and my brother decided to look for options in the bios that I might have missed. He couldn't find anything. But I decided to

Dear R People: I have two data frames, a.df and b.df as seen here: > a.df[1:10,] DATE GENDER PATIENT_ID AGE SYNDROME 1 4/16/2009 F 23686 45 RASH ON BODY 2 4/16/2009 F 13840 35 CANT URINATE 3 4/16/2009 M 12895 30 BLURRED VISION 4 4/16/2009 M 18375 33 UNABLE TO VOID 5 4/16/2009 M 2237 44

Hi ! I've fetched a spare AVM B1 card from the cellar, and installed it. After "modprobe b1pci" I did "capiinit" and capiinit moaned about a missing t1.b4. So I search the web and found one at http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the controller, I finally see p2p-mode: # cat /proc/capi/controllers/1 name b1pciv4-a400 io

On Mon, 6 Jul 2020 15:37:37 +0200 Pierre Morel <pmorel at linux.ibm.com> wrote: > On 2020-07-02 15:03, Pierre Morel wrote: > > > > > > On 2020-06-29 18:05, Cornelia Huck wrote: > >> On Mon, 29 Jun 2020 11:57:14 -0400 > >> "Michael S. Tsirkin" <mst at redhat.com> wrote: > >> > >>> On Wed, Jun 17, 2020 at

Hi Everyone... I''m following a railscast episode on how to implement an invitation feature. It''s going really well, but i''ve hit a minor snag that I cant get over.. undefined method `generate_token'' for #<Invitation:0x2563bf8> The invite form allows me to check for a user, and whether they already have registered. If they have, the invitation is not

Hi folks, Both plotrix and prettyR have been updated. plotrix now has the "Matlab" style dotplot that was requested not long ago on the list, provided by that intrepid duo, Barry Rowlingson and Rolf Turner. Mike Cheetham has contributed an implementation of the Piper diagram, also in response to a request. prettyR has finally learned how to display SPSS value labels in the xtab and

Hi guys, Can someone explain why sharing a GDI printer (think Laserjet 1000/1005/1020 for example) is so unreliable? I'm not moaning about Samba - I just want to understand. I have seen this several times. I get the printer working fine under Linux, then print to it through Samba, also fine. But then I get a call a day later "we can't print" and when I get there the printer

Hi, I seem to be unable to get Asterisk to recognise the '#' key being pressed to acknowledge an incoming call from a queue. No matter how many times I press the key to acknowledge, the Asterisk server acts as if I have not. I have installed the ztdummy module, and it seems that Asterisk is picking it up OK (mainly since it's not moaning about permissions for IAX timing any

I just replaced my fan in my nc2400. It was a 5hour job. Had to pull EVERYTHING to get to where they have the fan in the thing. Now I want to know if it is working. It is suppose to be thermostatically controlled, and it takes time to heat up. So how can I find out what Centos knows about the system temp and fan state? It was hard to tell if I put the connector in the right way. At least

Can this MB be used with Centos 4 (or 5)? For reference: http://www.logicsupply.com/products/ms_9832 I don't think we can use this new MB since the Realtek 8111C does not seem to be supported (well) http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089/ -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- -

Jeremy Allison <jra <at> samba.org> writes: > > On Sat, Mar 12, 2016 at 11:16:36AM +0000, Andy Walsh wrote: > > > > Also keep in mind that samba3.6 was successfully adopted on any device that > > had a usb2.0 port in the past. So slapping a usbstick/sdcard/hdd on a cheap > > router is already a common scenario. > > Yes, and I'd like to help

////////////////////////////////////////////////////////////////////////// I have got a couple of messages stating that I am wrong and that the resolver vulnerability sent to list by Oliver Friedrichs (oliver@secnet.com) is a new one. Our discussion with Oliver outlined that even though it is possible that this vulnerability was discussed during BOFs at conferences such as LISA, SANS and NETSEC,

Hi Dirk, thanks for your reply! I definatly want to go down the BDC route so that I always log on to the nearest server. The link between the two isn't really an issue - both have a DSL connection to the internet. I started by modifying my smb.conf files so that each server is a local master for their subnet, but only the uni box is domain master. After fiddling with the 'remote

http://www.sdmagazine.com/jolts/2006index.html BOOKS TECHNICAL Jolt Winner: Agile Web Development with Rails by Dave Thomas, David Hansson, Leon Breedt and Mike Clark (Pragmatic Bookshelf) Productivity Winners: ? Framework Design Guidelines: Conventions, Idioms, and Patterns for Reusable .NET Libraries by Krzysztof Cwalina and Brad Abrams (Addison-Wesley) ? Practical Common Lisp by Peter

I''m getting this error thats moaning about expected tag, but no tag found matching {:content=>"User James Apps was successfully created.", :attributes=>{:id=>"notice"}, :tag=>"div"} in the file application.rb. I tried using a regular expression - /#{user.first_name}/ , but that wouldn''t work either user_controller_test.rb 1) Failure:

Hi all, Im currently having an issue with Samba (at least thats where I believe the problem lies) and Windows 2000 and Windows XP clients. The problem occurs when some of the clients will go to load a document with Word or Excel, and lo, the client machine crashes, or the program opening the document freezes. This is usually worked-around as the offending program will generally work OK if the

I've taken the liberty of starting a new thread to discuss the design of the Asterisk CDR mechanism. The discussion has been kindly initiated by murf putting together a proposal: http://svn.digium.com/svn/asterisk/team/murf/RFCs. After reading the proposal I still don't think it's the right way to go. To my mind adding more channel variables increases the complexity in a situation

This is the only patch I currently have outstanding. No changes from the previous posting, except I rebased it against the head of git. Rich. -- Richard Jones, Emerging Technologies, Red Hat http://et.redhat.com/~rjones virt-df lists disk usage of guests without needing to install any software inside the virtual machine. Supports Linux and Windows. http://et.redhat.com/~rjones/virt-df/

Thanks for the pointer, will take a look down that route. Could you confirm the below is expected behaviour on Centos ? # semanage fcontext -a -t my_postfixauth_private_t "/var/spool/postfix/private(/.*)?" ValueError: Type my_postfixauth_private_t is invalid, must be a file or device type On 23 January 2017 at 19:06, Lukas Zapletal <lukas at zapletalovi.com> wrote: > Hello,