similar to: IBM x306

Hi, I asked yesterday about a problem with x306 and IRQ sharing, didnt get much info, now, i was playing with lspci, and see something strange, lspci -v shows me the TDM400P card is on IRQ 7, and the SCSI card is also on IRQ 7, lspci -bv (from the man - b - shows "bus-centric view, as seen by the BUS and not by the kernel) shows me the TDM400P is on IRQ 5, why does the kernel puts it on

Hi, I would like to know what type of configuration could get me closer to 100% hits in zttest, when testing a TDM400P with 4 FXO ports, I am currently running kernel 2.4.31, on a IBM Xseries 306, with 3gh CPU, HT is disabled, PCI latency was changed, i still cant get more then 99.975% in the zttest testings, Thanks for any info. Marco.

Hi everyone, I have a dataset(named "Mydata") which includes 4 different variables named; s1,s2,s3,s4 .Each variable(symptom) has 14 patients. I need to use random sampling to make, 5 different samples from my data with 5 patients in each sample. i.e. using all 4 variables I need to make 5 different samples by changing patients(with 5 patients in each sample). X8 X9 X10 X102 X110

Hi I think/hope there will be a simple solution to this but google-ing has provided no answers (probably not using the right words) I have a long data frame of >2 000 000 rows, and 6 columns. Across this there are 24 000 combinations of gene in a column (n=12000) and gender in a column (n=2... obviously). I want to create 2 new columns in the data frame that on each row gives, in one column

Hi all, thanks to the all of you. This list is very interesting also for a newby like me. My problem: I just setup my first full working asterisk installation with this config: 1. n.1 GXP-2000 2. n.4 Budgetone 102 3. n.1 TDM400p (3 FXS, 1 FXO) Everything seems to work fine, but the sidetone... it's really annoying! We can hear the sidetone only when we call to the outside (PSTN), it

Hi, this is my 1st message, I'm writing to ask if anyone knows if a PCI32 card like the TDM400P (quad analog) or the B410P (quad BRI) is working on a PCI-X bus, at 100MHz or 133 MHz. I'm really stuck with this, since I found a partial "yes" on this mailing list but my supplier says "no"! Thanks, Marco

Hi list, I have a "Wildcard TDM400P REV I Board 1" with 4 FXO modules and * 1.0.9 up-and-running. Only 2 FXO ports are used for 2 analog phones and are doing fine. I now wanted to use the 3rd and 4th port, but when I insert an analog phone, take it off hook, I do not get a dial tone. With my 1st and 2nd port, I get messages like: -- Starting simple switch on 'Zap/13-1'

I would like to hear from anyone good or bad as what their experience has been in recent times with STABILITY of current builds of Asterisk and drivers for TDM400P. The sort of configuration is: 6 incoming POTS lines. ie. 2 TDM400P cards. I am not concerned with: price points, or the advantages or disadvantages of using POTS vs ISDN technology, but simply RELIABILITY & stability of the

Hi, I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. I tried with and without answeronpolarityswitch=yes but it didn't change anything at all. With callprogress=yes answer get never detected. With

Hi Last week I had a lengthy thread in which someone indicated the my SIL card is a FRAID (don't know if F stands for the F word or Fake, though it doesn't really matter). I want to replace the controller with a controller that Linux will see the RAID1 group as a single HD and not multiple HDs as it happens with the SIL controller. Recommendations anyone? -- TIA Paolo --------------

Hi all, After reading great things about the OSLEC Echo Canceller (http://www.rowetel.com/ucasterisk/oslec) and seeing the reactions of people who have tried it on a recent Trixbox thread (http://www.trixbox.org/forums/trixbox-forums/open-discussion/need-people-echo-problems), it sounds like it is the "bees knees" for sorting out echo problems with cards like the x100p. Has anyone

Hello, I am trying to configure asterisk 1.0.7pre to get incoming calls from an ISDN line using an AVM fritz PCI 2.0 with Chan_capi 0.3.5. My problem is that the context is not recognised in the /etc/asterisk/capi.conf I have in /etc/asterisk/capi.conf 's section "[interfaces]" the following directive context=isdn and the following directive in /etc/asterisk/extensions.conf in

Hi, all Where can I get "Asterisk Developer's PCI Kit" in Australia? It is a TDM400P with 1FXS and 1 FXO module. I amight need an extra FXS module as well. Thanks, Rudolf

Hi all, I am using a TDM400P card with 2 FXS and 2 FXO modules. Everything seems nice, but i'm not able to make calls nor to receive any. When I try to make a call, I keep receiven the "all circuits are busy now" message, and when I receive calls, asterisk doesn't seems to care (don't get anything on the CLI) I'm using Asterisk 1.2.17 and Zaptel 1.2.16 from Xorcom's

I am working my way through "Samba-3 by Example". I have created all the simple samba servers with ease as I have done them in the past with trial and error... this book makes it easy now. I'm stuck. While on page 118 it says to not go further without validating. Well, The server is there and when browsing the network I can see the Samba server. When I try to connect it wants

Hi, I have a question about getting linux workstation to authenticate users against a Samba PDC when they log in and mount all the necessary shares. Current setup: Linux server with Samba as the PCD Windows 2k and XP workstations are on the Samba domain and authenticate all users with the Samba PDC. Wants: Linux server with Samba as the PCD Windows 2k and XP workstations are on the Samba

Hi I have a CentOS 4.2 server with postfix. The problem I'm having is that postfix insists on using $myhostname in the from field even if I instruct it to use $mydomain in /etc/postfix/main.cf or even if I hard code the domain name into $myorigin. What am I missing? BTW: postconf shows output shows that $myorigin is configured to use $mydomain, or the domain name itself ...

Hi I reached the conclusion that my networking problem stems from the fact that I have no peth0 device. I''m trying to locate what creates the device, but until now no success. So I have a simple question: What creates the peth0 device in dom0? TIA Paolo _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

I have a serious problem that repeats very often, after 30 - 50 calls and I can only solve it by stopped and restarting * :-( After a while, * seems to loose track of something. When an ISDN call from PBX needs to go to the Telco, I get 'Ring requested on unconfigured channel 255/255 span 2' It's always channel 255/255 ??, the 'span' number is random Setup: * between Local

Hi, I'm currently running asterisk 1.0.9-r1 and zaptel 1.0.9_p1-r1 (the current gentoo ~x86 versions), with the UK CallerID patches from http://www.lusyn.com/asterisk/patches.html applied. The Zap interface itself seems to work fairly well - although it's a little quiet, there is no echo. Unfortunately, there's also no CallerID. My zapata.conf is as follows: [channels]