asterisk users - Oct 2005 - TDM400P off-hook detection problem

Hi list,

I have a "Wildcard TDM400P REV I Board 1" with 4 FXO
modules and * 1.0.9 up-and-running.

Only 2 FXO ports are used for 2 analog phones and
are doing fine.

I now wanted to use the 3rd and 4th port, but when I
insert an analog phone, take it off hook, I do not
get a dial tone. 

With my 1st and 2nd port, I get messages like:

    -- Starting simple switch on 'Zap/13-1'
    -- Hungup 'Zap/13-1'

on my CLI, but with port 3 and 4, I don't see anything.

I have tried with the same phone that works well in port
1 and 2, so it's not related to the phone.

The configuration for port 3 and 4 is idential to 1 and 2.

zap show channel xx does not show anything special and what
it show is identical between port 1,2 and 3,4.

It's a production system, so it's not easy to stop and start
troubleshooting it, certainly not easy to open and swap
modules....

Anybody seen something similar ?

Thank
Alex

--
NEW: aXs GUARD hands-on Trainings v.7.0 
more info at http://www.axsguard.com/indextraining.htm

aXs GUARD has completed security and anti-virus checks on this e-mail
(http://www.axsguard.com)
---------------------------------------------------
Able NV: ond.nr 0457.938.087

Your card must be a TDM with 4 FXS ports. FXO port is to connect and analog
line, and FXS port is for connect analog phone. Are you sure that in 3rd and
4th ports you have immediate=no?

regards,

srsergio

-----Mensaje original-----
De: Alex Ongena [mailto:Alex.Ongena@able.be] 
Enviado el: jueves, 13 de octubre de 2005 11:17
Para: Asterisk
Asunto: [Asterisk-Users] TDM400P off-hook detection problem

Hi list,

I have a "Wildcard TDM400P REV I Board 1" with 4 FXO modules and *
1.0.9
up-and-running.

Only 2 FXO ports are used for 2 analog phones and are doing fine.

I now wanted to use the 3rd and 4th port, but when I insert an analog phone,
take it off hook, I do not get a dial tone. 

With my 1st and 2nd port, I get messages like:

    -- Starting simple switch on 'Zap/13-1'
    -- Hungup 'Zap/13-1'

on my CLI, but with port 3 and 4, I don't see anything.

I have tried with the same phone that works well in port
1 and 2, so it's not related to the phone.

The configuration for port 3 and 4 is idential to 1 and 2.

zap show channel xx does not show anything special and what it show is
identical between port 1,2 and 3,4.

It's a production system, so it's not easy to stop and start
troubleshooting
it, certainly not easy to open and swap modules....

Anybody seen something similar ?

Thank
Alex

--
NEW: aXs GUARD hands-on Trainings v.7.0 more info at
http://www.axsguard.com/indextraining.htm

aXs GUARD has completed security and anti-virus checks on this e-mail
(http://www.axsguard.com)
---------------------------------------------------
Able NV: ond.nr 0457.938.087

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.14/131 - Release Date: 12/10/2005