similar to: Problems with queue and remote agents

I would like to know which kind of solutions are available, both software and hardware, for human operator in an asterisk environment. The operator should be able to provide the basic standard operation, like to transfer calls and to see if the extensions are busy or not and so on. Thanks in advance, Andrea Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.

Is there a way to 1) disable asterisk from writing in the "full" log ? ( /var/log/asterisk/full ) or 2) implement a log rotation or similar of the full log ? I see the full log grows a lot (about 100 MB per Month) thanks in advance, Andrea Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla. Visitate il sito http://www.frameweb.it

Is there a way to run a macro in a GotoIfTime statement ?? from the wiki documentation it seems not, but...... I would like to do something like this: ......... 554,3,GotoIfTime(08:30-14:30|mon-wed|*|*?Macro(exten-vm,novm,567)) it does not work, as expected from documentation any workaround to call an extension WITHOUT vm (also if vm for that extension is present...) as a consequence of a Time

Hi all, I would like to eliminate about 150 lines in log /var/log/messages) every time a call is placed/received If I type, on the asterisk console, set verbose 0 the lines in the log disappear, but it appears to me too drastic as a method.... The lines shown in the log don't appear (at least to me) very critical: no problems at all are shown. Isn't any way to turn off this debug ? I

Hi all, I just arrived in Italy from Cebit, qhere I spoke with digium and Beronet people. They told me to try to use the mISDN stack to drive beronet and the new upcoming digium ISDN Cards. SO I searched, find http://www.beronet.com/download/card_installation_guide.pdf, and I immediately got the error: asterisk01:~ # cd /usr/src/install-misdn/ asterisk01:/usr/src/install-misdn # make install

....of chan_misdn ? I found a bug, and I don't know where to report it. Andrea Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla. Visitate il sito http://www.frameweb.it

Hi all, I would like to know if it exists the possibility to send to different context according to the caller IP Addres I receive H323 calls, and I have to route this to different devices according to the caller ip. I tried to use the context=first-context alias=999999 context=second-context alias=888888 but I was not able to succed in this; Moreover, I think the keyword alias is related to

I realize I cannot use inband audio for phones (voicemail and internal ivr, password for external trunks and other thing not working) So I put everywhere rfc2833. Doing this, anyway, make any EXTERNAL IVR NOT working. I see a lot of posts about this, but no solution, becouse using inband audio (which works for outside...) breaks inside IVR Is it possible to define to use inband audio ONLY on

I am trying to use misdn insted of zaphfc to drive two billion isdn cards zaphfc is ok, but the problem with cdr and the fact tha you always have to wait the bristuffed version of asterisk took me to try another way. so I downloaded the misdn installation script from beronet for the last version ( I am using asterisk stable 1.2, so now is 1.2.5) wget

Hi all, I would like to know if there is a solution to this question. Scenario: Two asterisk servers connected across the Intenet ( in SIP or IAX mode, no matter) with both of them having static ip addresses Then I add a second link (with another provider), with another NIC at both side, and again both of them having static ip addresses. Is there a way to tell asterisk to use both of these

Hi, I configured an asterisk box with 1 Digium Wildcard TE110P T1/E1 Card 0 I setup the jumper in e1 position. my zaptel.conf : defaultzone=it loadzone=it #gestione PRI span=1,0,0,ccs,hdb3,crc4,yellow bchan=1-15 # set this to 1-15,17-31 for E1 dchan=16 # set this to 16 for E1 bchan=17-31 # set this to 1-15,17-31 for E1 # Asterisk starts correctly, I see th 30 channels. Anyway I cannot put

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

Hi all, If I activate recording for an extension everything is OK. but If I activate call recording on demand i am non able to start recording In principle I should have to press *1, as indictaed in features.conf (I am using almost last asterisk code, updated 2 days ago from svn, version SVN-branch-1.2-r39379M ) Actually it produce no effect at all I am using FreePBX interface, and I saw

hi all, I am trunking via iax2 2 asterisk serverses if both of them have static ip addresses, I can connect them using no password, password or auth rsa with a pair of keys. If one of them has dynamic ip address and need to register on the other server, I can connect them with no password, but I am not able to do that using keys. The question is: which is the right register syntax to use when

I am having a strange problem. On one * box I setup the fax recive, via spandsp -app_rxfax I have no problem here. On a second box I did the same. The resulting PDF appear "corrupt". If I transmit the same fax to both * box, the tiff files received are the same. A deeper analysis shows the only problem is the width and heigth of the document In the first PDF, I see

Hi, I am trying to define DID Routes via AMP (last version 1.10.008) I succeded in defining single DID route, one per extension, let's say i.e. DID number 0101234567 set destination to extension 567 DID number 0101234555 set destination to extension 555 and so on Now I was trying to define only one route to a custom application DID number 0101234XXX routes to Custom-App

If you define a sip peer, wheather or not you put an entry in the field OUTBOUND CID, if you dial an external extension (let's say an extension on another asterisk server, connected via IAX2 connection) the callerid received by the foreign asterisk is device <YOURNUMBER>: i.e device <567> If you take a look at etc/asterisk/sip_additional.conf, you can see under the SIP extension

Hi all. We have Snom phones which do have a defined key in order to drop incoming call WITHOUT answering. Pressing that key, a "SIP/2.0 486 Busy Here" message is sent back. We have other phones (I.E. DECT Siemens C450IP, or ATCOM 320 or other) which DO NOT have any key to do that (or the key does not work, as is with Siemens C450 IP ): you have to answer and immediatly after hangup the

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

i have tried to install oh323 but it has failed to load this module please help [chan_oh323.so]WARNING[1024]: File loader.c, Line 212 (ast_load_resource): /usr/local/lib/libh323_linux_x86_r.so.1: undefined symbol: _ZN13PASN_Sequence17PreambleDecodeXERER11PXER_Stream WARNING[1024]: File loader.c, Line 368 (load_modules): Loading module chan_oh323.so failed!