similar to: AGI Script to interact with ACCESS Databse and Set CID info on the fly.

lol just posted this yesterday, it's for any ODBC DSN so Access or SQL or an Excel spreadsheet, as long as it's set as a DSN. This will work with outgoing Caller ID as well, it's just how you set it up in your dialplan. If you want I can email you the .agi since email will undoubtedly mangle the script. hth. HOWTO: A simple AGI application to modify incoming CallerID on the fly using

I recently changed to all IAX providers for my DIDs, and none of them offer incoming caller-names. Back in the days when I did have incoming caller names, I found the names provided by the various phone-companies fairly useless -- "WIRELESS CALLER", "YOURCITYHERE" etc. Last Friday I finally set off to roll my own, in order to meet the following requirements: - uniformely

I have been trying to make Broadvoice match incoming Caller ID and do specific things based on the number received, but due to Broadvoice requiring the "s" to start off an incoming extension, I cannot get this to work. Has anyone been able to do this? Here are some examples of my setup: from sip.conf: context=broadvoice-incoming from extensions.conf [broadvoice-incoming] exten =>

Hi all, using Skype for Asterisk I have the following problem. In my dialplan I need to have a CID matching (example.skype) over a DID (test.skype) : [example] exten => test.skype/example.skype,1, NoOp(nothing) exten => test.skype/example.skype,n, Hangup() Where test.skype and example.skype are Skype business account. In this case, when I get a : CLI> show dialplan example I get: [

Hi list, After successfully configuring Linksys SPA3000 and SPA3102 devices as Asterisk PSTN gateways, the only thing I can't get working is the PSTN Caller ID. The analog and SIP phones I've used can both display CIDs for internal calls, while the analog model also displays CIDs correctly when attached directly to the PSTN line. However, when PSTN calls come in via the SPA

Hi The first step I have to go through when users call into our IVR is to handle the case where users' PBX hides their CID number. In that case, I need to have them type their phone number (ten digits). OTOH, those who call without hiding their CID number are sent directly to the main menu. How would I go about prompting users for their phone number? Here's what I have at this point:

Hi there. Is it possible to have different sip users have the same CallerId number in sip.conf. I need this because we got multiple companies on this Asterisk box. Company A's internal numbers: CID: User: 1000 - User 1 2000 - User 2 3000 - User 3 4000 - User 4 Company B's internal numbers: CID: User: 1000 - User 5 2000 - User 6 3000 - User 7 4000 - User 8 Is this allowed? Regards

Does anyone know how to get CID working in AEL2 ? In extensions.conf you can do: exten => 111/666,1,PlayBack(demo-congrats) exten => 111/666,2,Hangup() exten => 111,1,PlayBack(demo-moreinfo) exten => 111,2,Hangup() and if callerid 666 dialed 111, they would get demo-congrats, everyone else gets demo-moreinfo. In AEL: 111 => { Playback(demo-moreinfo);

I'm thinking of doing an app to work with the CID that's gotten from the Zap channel. All the CID's I see from within the US are 10 digit numbers. I'm out in the rural areas of the US, and no-one ever calls me from overseas. If they did, what would the CID look like? What does the CallerID look like overseas? How many countries provide it? murf

Hi Guys, I have several * servers connected to T1 PRI's from various service providers in multiple locations the US. All the * servers use the same hardware with the same OS and * version. When connected to 5ESS Switches, using the NI2 (national) PRI protocol, the CID name and number come across fine and populate into the * CDR fine. I connected to a DMS-500, NI2 (national) protocol and

??? Usually phone companies set the outgoing CallerID for you but recently we got control over that and are now setting the outgoing Calleir ID ourselves.? My problem now is that the CDR will put the outgoing CID in the CDR instead of the extension that dialed and that causes problems for reports.? What is the proper way to set outgoing CID and keeping the original extension number in the

I can call my Broadvoice DID from a outbound caller-id blocked phone, and BV happily delivers the CID to Asterisk (and then on to my IP phone display.) I've tested with the *67 prefix from a PSTN phone to make sure it was supposed to be blocked. The number is always correct, but sometimes the the caller ID name is set to something funky (like a CO or switch center name.) I *think* this

Hi List, I need to modify the callerID name of the call coming back when a parked call returns to the extension that parked it when it times out. Looking at app_parkandannounce.c /* Now place the call to the extention */ snprintf(buf, sizeof(buf), "%d", lot); memset(&oh, 0, sizeof(oh)); oh.parent_channel = chan; oh.vars =

Hello I use the Linksys 3102 to connect Asterisk to a POTS line, and XLite on XP as an SIP client: http://img694.imageshack.us/img694/1421/3102asteriskxlitecid.png The problem is that by default, Asterisk doesn't rewrite the CID name + number in incoming calls, so that XLite displays whatever name I used in the 3102 and the extension the 3102 uses to register with Asterisk. How can I tell

How does one do translation for calls that come in from other pbx's where the incoming caller ID is an internal extension number on their pbx? Eg. when I get a call from Free-World-Dial the CID shows up as "429102" which is essentially their internal extension number sans any routing prefix. To dial the number back I need to dial the extension with FWD's routing prefix

Hi, I'm trying to configure a Linksys/Cisco SPA8000 talking SIP to both a local Asterisk server and also with a trunk directly to a VOIP provider. Everything works great, except I'm having a problem setting the outbound caller ID to a value different from the SIP username/authname. The SPA8000 has SIP setting for Display Name, User ID, Password, and Auth ID, as well as a "Use Auth

On 2/22/18 1:07 PM, Antony Stone wrote: > On Thursday 22 February 2018 at 19:10:51, Carlos Chavez wrote: > >> Usually phone companies set the outgoing CallerID for you but >> recently we got control over that and are now setting the outgoing >> Calleir ID ourselves. My problem now is that the CDR will put the >> outgoing CID in the CDR instead of the extension

Hi folks, My v1.6 Asterisk system logs all Call Detail Records to a PostgreSQL database, including those handled by the Privacy Manager. Unfortunately, even though I can use the CLI to see the information being submitted by anonymous callers to satisfy the demands of the the Privacy Manager, that information is not recorded in the database. Instead, all that is written to it: clid:

Hi All, I have a site using Polycom 501 phones and for some reason the caller ID of the phone number is coming up as sip:<number>@<ip of server> Does anyone know why? It seems to be a Polycom thing as a Linksys phone displays the CID number as just the number. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello I'd like to display CID information on users' monitor running Windows. I know I can run a script through the dialplan to send a datagram that is picked up Impulse Technology's free NetCID (www.imptec.com), but I'd rather use an open-source solution. An alternative would be to use a Windows application that would connect to Asterisk's AMI. I don't know if multiple