similar to: Unable to call some numbers with I4L

I can't find solution anywhere. I googled and find people with the same problem but there was no answers on how to fix this. I have W6692 based PCI cards that uses hisax driver (card type=36). Card is working fine under asterisk with i4l modem driver for incoming calls. If I want to dial out using some sip phone I don't get ring indication. Phone is ringing and I hear only silence until

I have * with i4l installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe

Sorry for a slightly off-topic question, but I'm getting desperate. I tried to use asterisk to talk w/ ISDN line and tracked the problem to i4l. I have a Diva PCI 2.02 (S/T) card and am running RH8 w/ 2.4.20 kernel (first version that supports the 2.02 w/ hisax driver). The switch is a 5ESS running NI-1 protocol. The card sync's up and reports other traffic on the line, but fails to

Hello all, This afternoon I had a BRI line installed by Telstra (our telco in Australia). I'm using an Eicon Diva 2.02 PCI ISDN card with the isdn4linux driver. Incoming and outgoing calls with Asterisk work fine (and with no echo - my main reason for getting ISDN). However, I can't seem to get outgoing DTMF working (incoming works fine). I made a call from my desk phone (Cisco 7940G)

I had unexpected hangups from my asterix box using the i4l driver. (SIP <-> SIP calls worked execellent, but SIP<->ISDN didn't.) Then I changed the i4l driver in modem.conf with the chan_capi from jungham. (http://www.junghanns.net/asterisk) I followed his instructions in the INSTALL file, and first encountered some errors compiling it. It help by deinstalling several

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).

Hello, Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card? My modem.conf: -------------- [interfaces] context=remote driver=i4l msn=16453 device => /dev/ttyds01 -------------- I get the following error: -------------------------- == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[8192]: File chan_modem.c, Line 383

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV

Hello, I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing

Hello Marc, Could you post the install details for the Diva PCI? I have a Diva Pro PCI 3.0 and I am looking to get it working... I am running Debian Testing. So far it appears there are a few things floating around but I am not certain which direction to go. I know I need to load the firmware first. I did manage to load the modules ok. Thanks, Greg -----Original Message----- From:

I'm looking for an ISDN card that will work for me using either the i4l or capi with asterisk under Linux. I'm in the US, so I need an ISDN-U interface. Can anyone tell me if this card will work for me? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=14922&item=6700879965&rd=1&ssPageName=WDVW There are a lot available, and for what seems to be a good price, if

-------- Original Message -------- Subject: Answer App hanging in I4L Date: Tue, 25 May 2004 13:49:50 +0530 From: Murali Krishnan <murali@bksys.co.in> Reply-To: ismk@myrealbox.com Organization: bk SYSTEMS (P) LTD., To: asterisk-users@lists.digium.com Hi, Anyone using ISDN4Linux (Eicon Diva Hisax ) card. If yes, please help me out. After configuring extension.conf and modem.conf I could

Hi, will spandsp work with i4l, or should I use capi? tia mazek -- http://www.marcinmazurek.com/ ::: nic-hdl: MM3380-RIPE GnuPG 6687 E661 98B0 AEE6 DA8B 7F48 AEE4 776F 5688 DC89

Hi, Anyone using ISDN4Linux (Eicon Diva Hisax ) card. If yes, please help me out. After configuring extension.conf and modem.conf I could make outward calls correctly from gnophone and kphone. Still the inward call to the configured MSN is correctly reaching Asterisk and also to the configured Context. But the issue is, it was hanging on 'Answer' application and throwing out

Hi, For the project I've used the Eicon DIVA card. It has 8 BRI ports, and for about 25% of the time there are 7 or 8 in use. So we want to replace it with an E1 card. Only issue is, replace it with what? The idea we have been playing with was to get a Digium E1 card (we already have bought lot of Quad E1 cards :-) and then just put it back to back against Asterisk server. And instead of

Hi, Anybody have lots of experience with PCI ISDN cards and Asterisk? I'm thinking of getting a BRI in my house to deliver more advanced signaling to my PBX (yes, I'm a geek :-)) but I've never played with isdn4linux. Is there any particular BRI card that works better with Asterisk than any other? Also, can the BRI interface cards participate in conference, etc., since they

I have been trying to locate the patch that is supposed to cure the problem of hearing sound from the previous call when dialing through i4l and an hfc card. Does anyone have it? It is mentioned briefly in this post: http://lists.digium.com/pipermail/asterisk-users/2003-February/007530.html Thor

Hello all, I currently have an Eicon Diva Client isdn card using i4l. Outbound dtmf doesn't work (and never has), but there has been an annoying problem with false dtmf detection in calls (that could be triggered easily by blowing into the receiver on the remote end). I looked through the list and found two patches that need to be applied - 1 to isdn_tty.c in the kernel, and another to

What I've got... Software: Linux: Slackware 9.1 Asterisk: out of CVS - so its new. isdn4k-utils: to test the ISDN Card Hardware: PII Pentium 400Mhz (Its a test of concept machine) with 320Kb RAM 1 x ISDN BRI Card - DIVA EICON (Installed + working) 2 x Grandstream (Barbie?) BT100 SIP Phones. What Works.. I can call from one phone to the other... get read voicemail... I can

G'day, New to Asterisk alert! I have a Netjet card running on linux 2.4.27 kernel using the HiSax module, and trying to use it for incoming/outgoing calls from *. I've tried playing with modem.conf and extensions.conf every which way I can think of, using samples and whatever I can find off the net, and I get the same message everytime I try to dial in. The complete message is: