similar to: asterisk hangup detection on a pbx analog port]

I had to return my TDM11B because it put the PSTN line 'off hook' the moment I plugged it in and wouldn't hang it up. The new card seems to work because I can actually make an outgoing call from the FXO port to my cell phone, so I'm pretty happy about that. But Asterisk doesn't recognize incoming calls from the PSTN. If I dial my home phone from my cell phone asterisk

Hi folks, I''m new to this... so hopefully someone can help me. I have a few objects... Property and Address and Landlord... where a Property has an address and a landlord has an address also. I''ve modelled this in the db with the properties table having an address_id and the landlord table having an address id. My rb looks like: class Property < ActiveRecord::Base

Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine. I bought the card mainly to get caller ID to work properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried

Can anyone suggest where I might begin looking for an answer please? I have just installed a TDM400P (2x FXS and 1x FXO modules installed) The first problem is that it does not seem to be able to detect if the remote party has hung up when a call comes through on the FXO. For example, if someone calls in, and then hangs up at any time after it starts ringing, Asterisk carries on as though the

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

Hello, I've one astribank with 8 FXO unit and 8 pstn lines connected to the astribank. When I receive calls on my ipphone I get always Unknown callerid. It's is possible to receive the callerid from the lines on the astribank unit? This is my config: [channels] language=es context=from-zaptel signalling=fxs_ks ;rxwink=300 usecallerid=yes callerid=asreceived ;cidsignalling=bell

Has anyone figured out the way of getting the caller id for BSNL on Asterisk 1.4.2 I have tried following link http://bugs.digium.com/view.php?id=6683&nbn=24 but was not able to get it, although did not ge any error too. I always get the caller id as asterisk. Can someone please help. Regards, Sanjay Rajdev

Hi, I'm currently running asterisk 1.0.9-r1 and zaptel 1.0.9_p1-r1 (the current gentoo ~x86 versions), with the UK CallerID patches from http://www.lusyn.com/asterisk/patches.html applied. The Zap interface itself seems to work fairly well - although it's a little quiet, there is no echo. Unfortunately, there's also no CallerID. My zapata.conf is as follows: [channels]

Hello list. I have a question about how to read the incoming calls' callerid on an FXO interface of a TDM 400 analog card; (it's one of those RED modules). Now -may this is the complexity adding step..- I have a GSM gateway attached to this FXO thing; incoming calls are processed as they should. But both when peeking on the CLI, as well as in the phone display I do not see the caller id.

Hi, I'm just starting out with Asterisk, in combination with a TDM400, filled with 2 FXS on channels 1 and 2, and 1 FXO on 4. Having just started, all I want right now is to be able to answer incoming calls on a phone connected to channel 1. The trouble is the caller id. I have caller id enabled on my line, my phone supports it, and when I connect the phone directly to the line, it works.

Hi, I have a weird situation where I have a noop command putting the callerid of the caller on my asterisk console so I know who is calling as a test, but it is putting the callerid of my extension in instead of the callerid of the incoming line. My /etc/asterisk/zapata.conf is [channels] context=default ;switchtype=national usecallerid=yes cidsignalling=v23 cidstart=polarity hidecallerid=no

(Sorry of this appears in the list twice, but I wasn't sure if it was blocked or not) Hi there, I'm having a problem with my TDM-400P which has been working like a charm up until very recently. It started to fail last week, and so I was hoping someone could illuminate me with some information as to why. Its configuration is as follows: ------------ FXS (green) module is in position 1,

Hello, I have recently purchased a TDM400P card with one FXO expansion card, and I'm having problems. The card does not pick up incoming calls. Asterisk detects the ringing line and rings various SIP phones as required. When a sip phone answers, the sip user hears nothing and the PSTN user continues to hear ringing. Here is the asterisk output for an incoming call:

Hey all, I recently noticed that DTMF caller-ID was implemented in CVS, so I requested the service from my telco (the Dutch KPN) and tried to get it going in Asterisk (current CVS), without success so far. This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2 HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm trying to get caller-ID working on is obviously on the

Folks, I've seen a few reports that people have had problems with hang up detection on UK cable phone lines. I have a TDM400P with two FXO ports, one connected to my BT line and the other connected to my Telewest/Virgin Media cable line. If I ring the BT line and then clear down, Asterisk detects this and acts accordingly. If I ring the Telewest line, the clear down is not detected, hence

Hello All, I have new TDM04B installed and working fine with Asterisk 1.0.5 built on RedHat 9. All is working fine except CallerID that bothers me big time. I have several Panasonic and Sony phones and CallerID works fine with it (when I plug in the line into phone instead into Asterisk I get CallerID) but fails with Asterisk. I am based in California (San Francisco) and my Telco is SBC

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

Hi all, First of all, I have spent a lot of time reading up on it. Anyway, I live in a shared accomodation with 2 roommates and a landlord and we share a cable internet connection. It is 2Mbit/400Kbit connection. Sometimes when one of us is downloading a song through Kazaa or a new Linux or FreeBSD iso, the bandwidth gets hogged and other users can't get through. I was trying to configure

I am trying to reconfigure an asterisk box that was using an HFC-S card with bristuff but is now using 2 analog lines therefore I want to use the TDM02B to connect to two POTS lines. The TDM02B has 2 red modules. I have this in /etc/zaptel.conf loadzone=nl defaultzone=nl fxsks=1-2 I have /etc/asterisk/zapata.conf signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes echotraining=400