similar to: Sipura spa841 problems

Hi Just 2 issues I have with SPA841. 1. I autodial extension 600 then inside an AGI wait for more digits. The digits are transmitted correctly to * but they do not show up on the SPA841 display, only the 600. How do I set the 841 is show the digits after the 600# 2. Is the SPA841 pixel display backlit? Master

Hi there, I have bought 70 sipura 841 phones for a customer of mine. When following the mass provisioning guide in the admin manual for the sipura, I see it download the spa841.cfg file from my tftp server Sometimes the phone also downloads is phone specific file via tftp, and it works okay then. But, after a reboot of the phone, it is very very likely that it won't startup

Hello all, I had been using a spa841, and all the sudden it's dead. When you power up, all the lights come on and nothing else. Has anyone experienced this? Thanks, Greg

Hello. I have a customer that needs to downgrade the firmware on their SPA841 to 3.1.1(a). I can't seem to find the firmware file. Google turned up 3.1.2-something and Linksys is taking a while to get back to me. Anyone happen to have that file lying around? Thanks, Nabeel

I have a Sipura SPA-841. It's developed a nasty habit. At random times, it likes to dial my cell phone voicemail number and play my messages to anybody who happens to be within earshot. Any clues where to look at what's going on? My voice mail number (extension 220 in my dialplan) is the only number being dialed. When this happens, show channels looks like this: IAX2/NuFone-1

Guys, Im looking for a good text file editor for asterisk config files that can be embedded on a web page for online editing (on an interface), any recommendations? ________________________________________________________________ Anton Krall Direccion General Intruder Consulting A Division of IntruderEnterprises S.A. de C.V. www.Intruder.com.mx www.IntruderStore.com.mx Tel. 3872-2200 ext. 201

Guys.. which free softphone is the best,grandest,most recommended one out there? based on your own experiences..

Guys. Anybody using sipuras 2002 knows if there is a way to make the phones connected to it to autodial an extension when the phone is picked up? For example, if the phone is on a police booth (building entrance) and you want the guys to just pick up the phone and make the phone auto dial the receptionist extension without the guys having to dial anything (ala batphone). Is this possible with

Does anybody have a good link how to connect Sipura with Asteriks, both behind NAT? I'm using FWD but their connection is like a weather (especially IAX), I need something more reliable. I was thinking of using stun and/or proxy but can not find any good link explaining how to setup Linux server -- #Joseph

Guys. How do those callcenter apps work with Asterisk where a call comes in and * send a URL and some screen popup up based on callerid or something or username or id and shows all the customers info? Anybody done that? What do you need to do that? If you are using ATAs or IP Phones, how do those integrate with the PC so the screen would popup?

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank

Hi all, The problem is on the volume of the voice sent by the SPA-841. I think the echo cancel algorithm sets a limit to the microphone when detects sounds or noise from the earphone. This problem generates an oscillation on the voice volume sent by the phone and even turns it off completely for very little lapses of time making the communication very uncomfortable. I manage three different

The SC420 does not support APIC (at least not with current BIOS). The Digium TDM400B card seems to always seek the same IRQ so it locks one down. The clone X100P cards often get a shared IRQ, even if vacant ones are available. I've found both the Digium card and the clones very frustrating with this system. Thus the reason Digium does not recommend it. I've gone to a mostly SIP

Hello All, I have been using the following phones with excellent success inside my lan: Cisco 7960 Polycom IP600 I have also been comfortable with the SPA-3000. I recently got a SPA-841 and the quality is aweful. Even in stock setup, it's like when I speak into the handset I sound like I am very far away. I want to get a hardphone for europe, but I need to be able to use a STUN server, and

Hi, I was just wondering if anyone knows how predictive dialers detect voicemail and answering machines, and if they could explain to me how that works. Thanks! Brian.

I just downloaded the zip file from grandstreams website to upgrade my gxp2000 firmware from 1.0.0.3 to the latest but seems there are some files missing on the zip file... Anybody been able to upgrade their firmware? My website shows this files as missing: 201.133.125.152 - - [11/May/2005:16:47:16 -0500] "GET /firmware/ring1.bin HTTP/1.0" 200 12737 "-" "Grandstream

The method we use for web popups on incoming calls in the astGUIclient client app that we are working on for release next week is to use AJAX(Javascript + XMLHTTPRequest) It works in Firefox and IE5+ and doesn't require any META refreshes. We've been using this internally for the last month and it works great. MATT--- -----Original Message----- From: Anton Krall

Guess who's here to do an Asterisk demo this week without the power supply for his SPA-841. I have an ATA186 with me. Both phones use a 5v supply. Does anyone know whether the supplies are interchangeable? Thanks in advance; sorry for the noise. B.

Guys. Ive been testing how to receive faxes using TDM400P cards and so far, after playing with gains, echocancell and echotraining on zapata.conf.. Ive ha dno luck, faxes come in as garbage or broken or with blank lines. Anybody has successfully done this? Any tips.. Also I have some ideas: 1. Is it really possible to get fxes on a fax machine using ATAs like the sipura 2002? Even using ulaw

I don't know what's changed, but four SPA841s and a SPA3000 are no longer answering when they get an inbound call from *. This has been a working configuration for weeks. I *have* been fiddling with the server config; however, the configuration is under version control and I've reverted everything to exactly how it was when the server was working. Doesn't fix it. I reset one of