similar to: Snom 360 problem

Anyone know how I can push a firmware update to a Snom 190 without using DHCP? In the web interface, I specify a path to the Snom firmware, and it works, except I have to physically press OK to get the update to download. I need to do it remotely...

Hello Although not stictly a asterisk issue, any help would be apreciated. Firstly a few notes on the snom 360, which I have had on a test bed for the last week. Its a great phone, with a good user interface, both physically and its web based one. At its lastest firmware it does have a few quirks, with regards to the way it handles usernames and passwords on the physical interface. These have

Hello, I have a customer who said that their Snom 360 is joining calls by accident. The situation is that they had one call on the line and another call came in. She pressed the hold button on the phone and the two calls were joined together. I do have "Call join on Xfer" set to yes, but I thought that would only come into play when doing a transfer, not putting someone on hold. The

I am just playing with a SNOM 190. Overall, I'm very impressed with the quality of the unit and the feature set. I am running the latest firmware (snom190-SIP 3.57u) and the asterisk CVS from last night (1/3/05). The only problem that I've encountered so far is with Call Forwarding, which doesn't work at all. The Snom phone is sending a "486 - Busy Here" back to *, which

Hi, I want to pick up a call with the snom's programmable buttons(snom190 -SIP 3.60x, snom360-SIP 4.1) with asterisk server (v 1.2.0), I tried with the option 'Destination' and when the incoming call arrive to another snom phone the button blinking. In this way I can only pick down it pressing the blinking button. The solution is call the *8 or parcking the call but my pbroblem

OK, last showstopper that I just can't puzzle my way through - parking calls with the snom phones. I get the two phones connected, I hit transfer on one, the other phone goes to MOH and the first phone gives me DT, so I dial 700 and hit the OK button. Call transferred, the SNOM hangs up before I have a chance to hear which extension it parked to. Is there a way to make the SNOM phones

Hi all, One of my users reports frequently hearing echo on her Snom 360 phone, even while talking to other Snom phones (via Asterisk) on the same LAN (i.e., all-digital low-latency connection). I can never reproduce it though, and swapping the phone didn't help. Has anyone else seen "mystery echo" on Snom phones? Any suggestions for debugging? On my own Snom 360, I sometimes

I have the dtmfmode in sip.conf set to use rfc 2833 however, when my users have to enter pin numbers to join let say someone's conference bridge the pin is received twice. Any ideas on how to solve this? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050120/56ff46fa/attachment.htm

Does anybody know if there is an app that will cause similar to occur on users PC? I have a scenario where users will have snom phones on their desks. Ideally when their phone receives a call I need to popup a web browser with a specific url. Any ideas appreciated. Neil on 5/7/05 10:52 PM, Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> wrote:

Has anyone got this annoying sidecar to illuminate when users are on the phone? In my function key settings I have: Context: Active Type: Extension Number: <sip:4000@serve.address.com;user=phone> (4000 is the extension I want to see/dial on the key). I can press the key and it will dial the extension, it just won't illuminate when the user is on the phone or on DND Since I have

Anyone have a Snom they're happy with? How did you manage that? :) I have a system of: Asterisk 1.2.3 2 Wildcard TDM400P Rev I and E/F 1 Snom 360 + sidecar ~15 Sipura/Linsys SPA-841 ~15 Grandstream 101 Everything (currently) is on the same network, not a router to be seen between any two. Also everything, except the snom, is working sweetly. The main problem is ECHO.. awful echo and

Hi, I am using SNOM phones with Asterisks for few years. They used go occasionaly NR, and I would reregister them from the phone web interface. But it started doing frequently for last few months. Here are SNOM Phone and the firmware version; snom190-SIP - Version-Code: snom190-SIP 3.56m snom320-SIP - snom320 jffs2 v3.36 snom300-SIP - snom300-SIP 6.5.2 Asterisk version - Asterisk

Hi I am trying to get a SNOM 360 to monitor other extensions i.e. when someone makes a call to/from another extension, one of the LED's on the SNOM 360 will change state. I am using 1.0.9/bristuff-8l. I have 2 extensions - 2001 is a SNOM 190, 2002 is a 360 - both are running the latest firmware. (3.60i for 190, 4.0 for 360). I have read all the relevant articles on the wiki on

Hi, everyone: I'm in the processing of deciding what IP phones we should use with our Asterisk server, and I wanted to get feedback from the user community on the quality, reliability and ease of operation of Snom phones. What do you have to say about these phones? Are there other phones you'd suggest along with or instead of Snom? Thanks, -Stephen-

Some of you might already know that we are releasing a new phone, snom 360. To make the phone well-known and stable, we have made a soft phone version out of it and offer it for trial or private use for free (for more details, see the license conditions). There are only few limitations to the phone. First of all, the audio subsystem will work only work with an acceptable quality if you are using

I recently got a SNOM 360 and have been trying to get the extension lights to work. I can see the subscriptions with sip show subscriptions but I don't see any notifies when a call is made. I must be missing something because I've tried looking to see if anyone else has had this problem but the only solutions I've seen have been to put hints in and I have those. Any suggestions?

Here is a part of a working sip.conf for Asterisk with SNOM190 Phones. Try using host=dynamic and have a closer look at the configuration in the snom 190. Also, try using dtmfmode=rfc2833 . [general] realm = hallinux2.gwsnettech.local port = 5060 bindaddr = 0.0.0.0 context = default disallow=all allow=alaw allow=ulaw allow=gsm register => 081503:xxxxxx@sipgate.de/081503 language=de tos=0x04

Hi, in the Snom FAQ I found the following information: After staring up, the phone tries the URL given in the "Setting URL" of the phone. ... BTW this setting can also be set via DHCP. .... option tftp-server-name "http://192.168.0.9/snom200{mac}.htm" The documents used: FAQ-04-06-14-sf.pdf "Setting up DHCP for snom phones" FAQ-04-03-24-sf.pdf "How can I

Sorry if this is an obvious question, but I haven't seen an obvious answer on the wiki that I remember. Has anyone managed to make the record button on the snom 360 fire off the Monitor() application? I don't see a bounty, and googling for "snom 360 record button asterisk" returns tons of product specification pages. (Joy!) I don't see a bounty for it, and the only

Hi, I am using a number of snom190 phones, and an asterisk "gateway" server, and recently started experimenting with call transfers. The snom phones provide support for attended and un-attended call transfer, so I would rather use that than call-parking. I have found that un-attended transfer works fine, and that attended transfer works fine if the originating phone call is NON-SIP