similar to: aastra 9133i DTMF tones

hi i've got an AAstra 9133i ip phone, when i've bought it, i've set it to use a SIP/400 account on my asterisk, then, i've changed settings and i've set set phone to use a SIP/500 account . now, when i connect the phone to tthe network, it register itself on asterisk with both accounts!!! -- Registered SIP '500' at 192.168.100.188 port 5060 expires 120 --

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

I've been pulling out my hair all day on this one. If anyone can help, I'd really appreciate it. :-( I've got an Aastra 9133i (with the latest firmware version) and a Cisco 7960 sitting behind a NAT device on my LAN. The Asterisk server is hosted offsite and has a public IP address. I've set up port-forwarding on the firewall for both phones to tunnel the SIP messages initiated

Is it possible to control the light on a programmable button without the blf option? I'm using a programmable button to turn call recording on and off and I would like the light to indicate the status. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 david at safedatausa.com

I've been looking at the two phones Aastra 9112i and 9133i for our offices now. I was just curious if anyone could tell me about the ring tones. Specifically: 1) How many ring tones do they come with? 2) Can you upload your own ring tones? 3) If so, what format and how? (wav, mp3, gsm, etc. and TFTP, web management, flash, etc.) Thanks for any help. -- Tim DeBaillie 812-476-2721

Hi, Does anyone have experience with Asterisk and the aastra 9112i or 9133i phones? I am looking at purchasing some, and was curious how quality, and stability was with them.

We have a new customer with a lot of old phones like the 9133i. They won't register, and we see some very strange behavior with them. If the SIP peer exists, they simply fail silently, with no error in the CLI or the messages log. Nothing works, but no errors. If the peer does not exist, it's clear that it's registering improperly: [2013-04-28 13:34:31] NOTICE[3058] chan_sip.c:

Having scoured the web, I still am no better off .. I have 2 Aastra480i's , and 120+ cisco 7940's :) . I am trying to decide which model to use going forward when we purchase more kit. They both seem much on a par regarding features. Q1: Is there anyway of making the cisco auto-answer _without_ having to manually edit the configuration on each phone ? I've been able to get the

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

I have a customer that has recently upgraded their network and now their Aastra 9133i phones are loosing their connection to the Asterisk server. They were using an external Asterisk server and now we have installed a new internal server with Asterisk 1.4.8 on a SIP/IAX implementation with no Zap cards. Only hard phones seem to be having problems keeping a connection to the server, soft phones

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

I'm having problems getting my aastra 480i to register with the asterisk server. I can inititate calls from the phone, but >sip show peers does not show any IP address registered for this phone. I am probably missing something stupidly simple. Anyone have an example config to share or corrections for my configuration? Asterisk 1.2 aastra 480i CT has the 1.4 firmware <sip.conf>

Fellow list members, I have run into an issue where I encounter a delay at the beginning of a phone conversation when I make outgoing calls through Asterisk with an Aastra 9133i hardphone. This is most noticable when I call a voicemail system with the Aasta and then with a land line or other VoIP phone. The first word or two of the voicemail message is generally cut off. According to

Hi, I just purchased a 9331i phone. It's great! However, having a slight issue with line 2 and 3. line 1 works fine. But when I try to make a call with line 2 or 3 I get a fast busy from the phone. Asterisk shows this: Mar 23 15:19:12 NOTICE[18185] chan_sip.c: Failed to authenticate user No User <sip:No%20User@mysipserver.myhost.com:5060>;tag=34c1cd2bf55cb8d Can anyone with a

Hi, Does anyone know of some way to make a light on one of the keys of an aastra phone light up (or go off) by sending it a command from asterisk?

I upgraded my office server from 1.4.22 to 1.6.0.5 on the weekend and after some testing there seems to be a compatibility problem when using Aastra phones. With 1.6.0.5 all incoming calls to all Aastra phones were dropped after a minute or so. I installed 1.6.1-rc1 and now the newer Aastra phones (5xi) work properly. The problem remains with the older phones (9112i, 9133i and 480i). If I dial

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the 480i

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the

Hello. Just rx'd the sip - aastra 9133i. Haven't done sip before. My initial attempt at setup has failed. "No Service" Anyone want to contact me off-list or on irc ? Regards...Martin

Hi, I have several aastra 9133i phones, which are connected to an asterisk 1.2.6 system. I have setup MWI on the phones to point to the IP of the asterisk server, but although there is a message waiting new in the mailbox, the phone's light does not light. Any thoughts?