similar to: How to use * and # as part of numberindialcommand

Michel Send me the same output for a dial string that only sends the *31* Is this an ISDN line? What type of card/signalling/switchtype are you using? It looks as if the PSTN switch accepts the *31* and then hangs up so you can make the NEXT call with the *31* feature enabled. If so I assume the *31* feature will be enabled for the next call on the ENTIRE SPAN if it is an ISDN trunk group. If

Hello my friends, I've a doubt, i want to be able to forward the incoming calls from PSTN to my cell phone...i mean, qhen i'm out of the office i need like aq macro that helps me to forward the incoming call that goes for example to my internal extension SIP 207, i 've this macro but i can make it work properly....i can't activate the forward in the phone, is quite confuse:

hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but before i was using asterisk 1.4 and had the same problem, it concerns an italian voip/sip provider called eutelia/skypho, my problem is the following one: when i start my pbx my skypho account is working fine, meaning that e.g. incoming calls are shown in the asterisk CLI and caller and callee can hear each other when

hi ppl :D my configuration is as follows, i run (let's call it machine 2) debian etch 4.0 and asterisk 1.2, i use voiceone (www.voiceone.it) as an interface to manage asterisk, I have a grandstream/handytone 486 as a sip device, no PSTN line or anything like that all SIP only. I have a machine (machine 1), which functions as my router and machine 2 and sip device are behind it, grandstream box

Hi! I'm here again with echo canceller problem... :-( I think I've done everything to enable echo canceller feature, but it still doesn't work... Can anybody tell me if there is some error or something missing in this configuration please? I'm using Eicon Diva Server 4Bri. http://www.eicon.com/worldwide/products/MediaGateways/disv4bri.htm?techspec=1&regID=4999 Card

I am still getting these in my maillog: Jul 13 07:39:38 pop5.cfu.net dovecot: IMAP(breu at cfu.net): Corrupted index cache file /var/spool/mail/filer/storage//cfu.net/b/r/breu/dovecot.index.cache: invalid record size Jul 13 09:35:03 pop5.cfu.net dovecot: IMAP(breu at cfu.net): Corrupted index cache file /var/spool/mail/filer/storage//cfu.net/b/r/breu/dovecot.index.cache: invalid record size

Hi chan_capi users, this thing is awesome, no delays like in modem_i4l! Plus, it got those nice ISDN features. Here's my question: Does my service provider (Deutsche Telekom) have to provide me with these Services (CD, ECT)? (the Readme in 0.2.5 says "does not relay on service CD") I know, that I don't have CFU,CFNR,CFBS (which I would have to order seperately). How likely

I have a lattice plot that has 4 pages with 4 columns and 8 rows per page. I wish to have the rows use a separate x-axis since their ranges are quite different, but I wish to have those same limits used on each page. By setting an element of the scales list to something like x = list(limits = lim.list$CFU, lim.list$CFU, lim.list$CFU, lim.list$CFU,

For some reason, using the qcc package, I'm unable to use the plotmath notation in the title. Can anyone see what I'm doing wrong? library(qcc) a <- rnorm(100) qcc(a,type="xbar.one",title=expression(bar(X)),ylab=expression(CFU/ft^3) ) This seems to not let the expression be evaluated, so I tried:

Hi all, A few days ago I found out with help of some of you guys how to set CLIR. (Calling line identification restriction) My first idea was to use the keypad protocol to set the CLIR with dialing *31* before the number but this was not possible. So thanks to Damon Estep I got it to work with executing 'SetCallerPres(prohib)' before the dial command. This works perfectly! But now

Hello All, Upgraded a test machine this morning from beta9 to rc1 and lost access to messages and folders. an strace on the imap process shows it accessing the home directory, but not the mail directory. The two queries that I use are: password_query = SELECT email,crypt as password FROM users WHERE email = '%u' user_query = SELECT homedir AS home, maildir AS mail, 1000 AS uid, 1000

Dear All, I can not transfer call in progress. What's wrong with my macro? I think tT flags is enough right? [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})}) ; Get CFU key exten => s,2,Set(DNDStatus=${DB(DND/${ARG1})}) ; Get DND key exten => s,3,GotoIf($["${temp}" = ""]?5) ; If not existing, goto priority 5 exten =>

Hi The only way to have CD service is using: DAHDISendCallreroutingFacility(<destination-5551212>, <original-my-number>, cfu|cfb|cfnr|unknown) or it is possible also with Dial() command before answering the call also ? Regards Babak -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have just installed a Sirrux PC140 card for the first time. Managed to build the drivers and get * to load them on FC4, but it does not work. It seems that layer1 in the ISDN is not even activated. The same ISDN lines connected to a Samsung DCS works so it is not the lines. I am including my sirrix.conf and the output of some of the * Srx commands below. Any pointers would be

Hello List Next question where google did not spit out an unsable answer. When redirecting a call with Transfer, I would like to correctly indicate the reason. I did try this: exten => XX,1,NoOp(Call to ${EXTEN} from ${CALLERID(all)}) exten => XX,n,Dial(SIP/ZZ) exten => XX,n,set(REDIRECTING(reason)=cfb) exten => XX,n,Transfer(SIP/YY) I did try with 'reason'

The following transfer led to a crash of asterisk, without leaving a core or any utterances in messages or debug file. It looks like the zombie which was created during the MASQ-transfer was not cleaned up... But why did it start a Dial??? And... why does Asterisk die when this happens?? Thanks!!! Michiel -- Zap/32-1 answered Zap/6-1 -- Stopped music on hold on Zap/6-1 -- Starting

I have SIP handsets which allow the user to forward a call to another number after a specified interval of ringing time. On the SwissVoice this is refered to as CFNR (Call Forward on No Response). What actually happens is that after a specified period of time (default 15 seconds), the handset sends back a "302 Moved Temporarily" response to Asterisk. The problem is that when Asterisk

Hi I installed Asterisk 1.8.7 with CD ISO(Elastix 2.2) I want to use DAHDISendCallreroutingFacility Application on a PRI link(LIBPRI Already installed). according to https://wiki.asterisk.org/wiki/display/AST/New+in+1.8 Asterisk 1.8 include this application but I cannot see it with "core show applications" Do I need to install mISDN or other modules for using that ? Regards M.Shirazi

Hi Richard Thank you > You need to set more redirecting information [1]. > > In sip.conf send_diversion=yes needs to be in effect. You also need > to setup > the from party id information (at least the from number) to indicate > where you > are redirecting from. You should also increment the redirecting > count. > > Richard > > [1] >

We are running Dovecot 1.0.beta9 w/ mysql authentication. Mail storage is a Network Appliance F810 filer and we are using maildir. The only issue that we have run into is that pop3 logins take much longer than imap logins within dovecott and many times longer than a similar connection with courier-imap. For example, dovecot IMAP and courier-imap POP3 and IMAP logins take less than 1/2