similar to: delay before dial on TDM04B - continued - poosibly solved

I tried adding wwww to my dial string... It appears to not made any differnece. I see by watching show channels that the w's are there in the dial. I have this box connected to bell south down in georgia. I have an identical box connected in indiana. The box in indiana works fine when dialing out. When in GA dialout is getting "you must first dial a 1 to place this call". show

Hello. I am a spanish student, so excuse my English. I have this HW: - 2 X100P PCI with two analog lines plugged in. These lines are two extensions of a panasonic PBX. Zap/1 = X100P <-- analog line --> extension #237 PBX Panasonic Zap/2 = X100P <-- analog line --> extension #245 PBX Panasonic - 1 TDM20B with two analog telephones plugged in. Zap/3 = TDM20B

Hi, Some weird problem (or I'm too sleepy) happens with a tdm04B revision G (4fxo) Steps: modprobe zaptel modprobe wctdm ztcfg -vv /etc/zaptel.conf fxsls=1-4 # TDM04B defaultzone=us loadzone=us /etc/asterisk/zapata.conf signalling=fxs_ls group=1 context=incoming channel => 1-4 modprobe zaptel and wctdm load fine, however ztcfg -vv shows: 0 channels configured Im using centos 4.4 with

hi i need help in connecting a X100P-clone in germany. Basic questions: a)what configuration do I need ? what is the difference (maybe explain in german? via email?) fxs_ls: FXS (Loop Start) fxs_gs: FXS (Ground Start) fxs_ks: FXS (Kewl Start) b) can I use one card for connecting to the telephone network (in this case my analog pbx) and the same card for connecting an analog phone

Hello! We are using the Digium 405PP card, and getting the following messages: Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1 Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 8 on Primary D-channel of span 1 My config file is below. We are trying to set up D-Channel on channel 24, 1-23 in trunk group 1,

https://bugs.freedesktop.org/show_bug.cgi?id=70130 Priority: medium Bug ID: 70130 Assignee: nouveau at lists.freedesktop.org Summary: unable to compile fragment shader program Severity: normal Classification: Unclassified OS: Linux (All) Reporter: infyquest at gmail.com Hardware: x86 (IA32)

I have a customer running Asterisk 1.2.13 with Zaptel 1.2.11 that is having calls dropped. Sometimes you can stay on the phone for a long time and sometimes the call is dropped within a minute. There are 9 lines connected to 3 TDM04B cards. The Panasonic Pbx we replaced did not have this problem. There are 8 SIP phones and 16 analog phones connected to two Astribank-8 units and everyone

I am searching for a way to add a 2 second delay before calling out with Dial(). Sometimes I get the message "you must first dial a 1 to place this call". I presume the phone company is missing the first digit pulsed out sometimes. How do I put a 2 second delay after coming offhook and before dialing the digits? Thanks, jerry

Hi. rsync 3.0.8 FreeBSD RELENG_4 i386. rsync -Haxi --delete /.../ /.../ The first pathspec above (residing on zz, a full filesystem) is: /vvvv/wwww/xxxx/zz/ The second pathspec above (residing on yyy, an empty filesystem) is: /vvvv/wwww/xxxx/yyy/zz/ It's obviously a 'copy everything over' operation. I've had to obfuscate the pathnames, however the exact pathlength throughout

Hi All, I have just migrated from Asterisk 1.0.0 to Asterisk 1.0.5 and I have an X100P installed. The old asterisk was working, but now the new version isn't picking up any calls! However, I did notice that after installation, I performed modprobe zaptel and modprobe wcfxo and they worked fine, but when I executed ztcfg, I get the following errors: ioctl(ZT_LOADZONE) failed: Invalid

I would like to install a TDM04B with Asterisk@Home 2.4 and Asterisk@Home 1.5 but I didn't find documentation about this installation. Thanks in advance, Nelson -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060206/85ff5252/attachment.htm

I already have one Digium TDM04B installed in my server working fine. I just received 2 more so I did added them to my server. When I booted again linux told me that it found new hardware I said ignore. Then I log in as usual. I did ztcfg -vv to see if it sees 12 channels now instead of 4 but it only see 4. So then I did again modprobe zaptel, then modprobe wcfxo and wcfxs hoping it would see

Hello, I have installed asterisk version 1.2.12 and latest zaptel modules. but i can see some IRQ conflicts on the server. iam uisng two TDM04B cards. according to my previous knowledge on asterisk verison 1.07 asterisk has given lot of erros when starting if you have assigned the same IRQ number to any other device. My question is new releae version 1.2.12 has resolved the IRQ issue ?? TDM04B

Hi, I just received in the mail my TDM04B card and put it in the computer, now the computer won't even show the video card bios or the post screen. From the digium website I could not find any specific requirements for the pci card, like 32 or 64 bit slot. The motherboard for the computer I put it in is an Asus A7V333 with PCI 2.2 compliant slots. I am thinking that maybe I just got a dud

Hi and thank you. I am a beginer trying to install my first TDM04B. I am able to receive call with the card using: [incoming] exten => s,1,Dial(SIP/robgol,20,tr) on my extensions but, with [outgoing] exten => _0X.,1,Zap/1/${EXTEN} I cant send them out. I am getting the following error: Mar 26 23:37:07 WARNING[5189]: pbx.c:1291 pbx_extension_helper: No application

I'm installing my first Asterisk server. I have a TDM04B card installed in my asterisk server (4x FXO ports). I have 5 Cisco IP phone 7960 working fine on asterisk using SIP. My configuration to receive call is working as expected meaning anyone calling on one of the 4 FXO ports is answer by asterisk and asked to enter the extension of the person to reach and then it is transfer on the

Hi, A week or so ago I wrote about the problems I was having using a Digium TDM04B card in a Dell PowerEdge 750 IU running Fedora Core 1. Digium steadfastly indicates their card won't work in any PowerEdge 650, 700 and 750 series machines "do (sic) to a failure in interrupt handling between the pci bus and the card." My question to the list is: for those of you using a TDM04B

Hello, I have installed asterisk version 1.2.12 and latest zaptel modules. but i can see some IRQ conflicts on the server. iam uisng two TDM04B cards. according to my previous knowledge on asterisk verison 1.07 asterisk has given lot of erros when starting if you have assigned the same IRQ number to any other device. My question is new releae version 1.2.12 has resolved the IRQ issue ?? TDM04B

Hi, I am just trying to figure out how to setup a TDM04B card for incoming/outgoing calls. I have 4 lines, which are provided as a rotary trunk group, currently hooked into a Nortel system, which asterisk will replace. I have setup a Dell 1800 (Tower) system with the TDM04B card, which seems to work. The question is how do I set it up that all 4 lines are part of a trunk group, such that

I have installed Digium TDM04B with the latest CVS. However I have encountered following problems: 1. When it dials out, many times the digits are not properly recognized by telco as I hear the announcement "please check the number and dial again" although I see on the screen that the dialed number is correct. 2. When the call is forwarded outside, with something like exten =>