similar to: T1 DSU's/Split for voice

Can anyone offer up a suggestion on a reliable and cost effective customer premise hardware setup to be able to take an inbound IP T1 and deliver a PRI interface to a remote office? Trying to reduce the amount of hardware required to implement this, right now we use a Cisco router to take the IP T1 in on a serial port and then we go Ethernet to a slimmed asterisk box with a single port T1

Does anyone know if is possible to purposely set red alarm status on PRI circuit for testing purposes (other than unplugging it). I have looked for a console command which might allow this.... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070411/985e8e64/attachment.htm

Can an asterisk box equipped with a Digium T1 card handle Integrated T1 circuits? I have a T1 with 768k data and the remaining channels voice, can the asterisk box do the Data routing + Voice processing? It's only going to support 4-5 users(the voice channels won't all be active obviously). ________________________________ This e-mail, facsimile, or letter and any files or attachments

Hello, I am currently pricing out various T1 and PRI options for a client of mine. We need voice and data - we want T's. Whether it be two seperate T's, two superate fractional T's, or one combined fractional T, we need it done. We are getting pricing and one provider is telling us that they have quality issues with the "Integrated Access" product. From what they

Hello All, Just a question, I have an adit600 and I am looking for a way to pull the incoming cid into asterisk. Does anyone know if this is just not possible via t1? Or is it only available on PRI? Thanks, Greg

> Mark Farver wrote: > > > On Fri, 2004-12-17 at 16:26 -0600, Kristian Kielhofner wrote: > > > >> We are getting pricing and one provider is telling us > that they have > >>quality issues with the "Integrated Access" product. From > what they > >>say it sounds like you can have audio dropouts on the voice > channels >

Hi, I learned about shorewall a few days ago and am quite impressed with how easy it was to create a powerful firewall. I set up a test system with a cable modem and it worked flawlessly. I''m going to be building a Router/Firewall for a new T1 that will be using a Sangoma WANpipe card w/ integrated CSU/DSU to connect to a T1. Has anybody done this yet, or do you know if it''s

[Please excuse if this is a repeat; I initially tried to send it from a different account, and it's been held up for a couple of days awaiting moderation.] 1) What's the absolute minimum required (hardware-wise) in order to get one in-bound POTS line into Asterisk, and then have IP phones "inside?" [In other words, I obviously need a NIC -- but what would be the

> The documentation mentions that the Digium channels can be split into some > voice channels and the remainder of the channels used for routing IP > traffic. > > Does any one have this in use in conjunction with Asterisk? Does it work > well? Would you recommend it for a production server? > > Obviously, if this works, this makes for a cost effective platform where

I've been trying to configure an E1 in Mexico using unicall, i went into vozdigital, googled this list, and finally followed this instructions: http://voip-info.org/tiki-index.php?page=Asterisk+MFC+R2 I have 10 PSTN numbers and 10 "lines" assigned, so i only have 10 "channels" assigned from my telco. However when i try to simulate a call using this call file: --------call

Hello All, I was wondering. What are the primary advantages to using a PRI over a T1? As I understand it, the PRI terminates very fast, meaning you can do immediate answer and dial... This is very handy on the BRI line I have on the asterisk. Can T1 signalling also do immediate answer, or does it just behave like a channelized pots line and ring as usual? I am trying to determine if I should

The "telco guys" probably did something non-industry standard and reversed send and receive in the jack that they plugged the CAT5 into. Sure it works, sure it is easier, sure it is not the correct way of doing things. Thanks, Steve ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Lacy Moore - Aspendora Sent: Sat 4/22/2006 2:55 PM To: Paul

Hi all, When configuring Asterisk with an ISDN card, it will at one point become necessary to select the LBO (Line Build-Out) value. This is an integer (0-7) that is determined by the length of the cable and is selected from the following table. Many of us are familiar with it: CSU (dB) DSX-1 (feet) ------------------------------- 0 0 0?133 1

I have a method: ? def reduceProuctInventoryBy(product_id, reduction) ? ? t=Product.find(:first, :conditions =>["id = ?", product_id]) ? ? t.qty=(t.qty-reduction) ? ? t.save ? end and the model: class Product < ActiveRecord::Base ? validates_presence_of :qty, :specialDescription ? validates_numericality_of :qty end but when i run my method, I get this: "can''t

Do the Digium cards have a built in CSU? Is a CSU an FCC requirement? or just a carrier requirement? TIA

Hello List! Thank you for your input so far. I have successfully imported my data into R but have hit a snag in plotting. Simple plot commands are unable to find my headers when I try and plot my data on an x/y scatter. My data is a 2 column 8000 row table (saved as .txt file) imported into R. >demand=read.delim("C:\\Documents and Settings\\E066582\\My

Hello All, I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect T1 lines it goes in RED. When I do connect the same line on a different Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1 Card for any hardware failures. I heard about loopback test , how helpful it is? Here are my configuration /etc/zaptel.conf span=1,1,0,esf,b8zs

Hello All, I am thinking about using a linux server as a T1 router. I have searched the list, but have not found a discussion about what I''m trying to do. I have a situation where the Cisco router I''m using will not handle the additional bandwidth I added recently. Unfortunately, I cannot afford the Cisco unit that will. I would like to know if anyone has successfully done

Does anyone know if I could use modprobe command to find out rather than set the jumper on a Digium PRI card? I want to find out the jumper settings on the card without opening the box which will cause down time. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello Dan, Have a look at this link: http://www.adcomcorp.com/asterisk/tellabs I got those pictures up there, may be of help. In essence, 1 pair is either a tx pair or an rx pair. If I recall, Orange and Green should be one side, and blue brown should be the other side. I tried to upload them to the wiki (even 40% size) but they didn't show up for some reason... Files are large on the