similar to: Cisco 3620 NM-HDV-T1 PRI

If you have a PRI terminated in a Cisco router talking SIP to * and would be willing to share your Cisco config, please respond. Also, I would be interested in knowing what version of IOS you are using. We are using an NM-HDV in a 3640. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Hello, I've got an ISDN PRI circuit terminating in a Cisco AS5350, which in turn is talking to an Asterisk server via SIP for call origination and termination. Seems simple enough, and it works for the most part, but: 1) Caller ID name data comes in on the PRI, but doesn't appear to get handed off to the Asterisk server via SIP, at least not in any format that Asterisk

Hello, I am using a Cisco-2,811 router with PRI as a gateway between Asterisk and Nortel TX-1. I had problems with name transfer and with the help of Cisco support I've fixed it. Enclosed here are the definitions needed for it. BTW, Cisco's CCM is using MGCP thus the Q.sig is handled by CCM. Here I am using SIP so the router must decode/encode the Q.sig. The Nortel should be defined

Greetings all Grandstream released a new firmware and it seems like the speaker phone problem has been fixed. However we updated to firmware 1.0.1.12<http://1.0.1.12>to fix the echo problem but found other problems were now created. The worst of these new problems is that the whole phone starts degrading, the volume starts getting lower and lower. The ringing starts fading and the calls

The CDW part number is: 672205 And the cisco part number is: CON-SNT-CP7960 Hope this helps... In fact I think I will add it to the Wiki. ~c ------------------------------ Message: 11 Date: Mon, 27 Sep 2004 10:40:38 -0500 From: "W. Kevin Hunt" <Kevin@hbcorporate.com> Subject: RE: Cisco Downloads --> was --> Re: [Asterisk-Users] Cisco 7960 andAsterisk...not working... To:

Hi All: I have a Cisco3620 with a proper T1/PRI card installed with asterisk running on the same LAN. Since I have lit up the line, I can dial out and make calls to regular lands lines. However when a call comes back in it rings the destination phone once and disconnects. Here is an error from my router 15:40:45: ISDN Se1/0:23 SERROR: L3_GetUser_NLCB: EVENT 0X45 No NLCB 2 15:40:45: ISDN

Hi all, I was looking to build a SIP-to-PRI gateway using Asterisk (as in my other post), but there is also an alternative of using a Cisco router with something like an NM-HDV module with a T1 VIC module and DSP channel banks. The question is, would it be more reliable to offload all dahdi/zaptel/libpri type stuff to a dedicated gateway device (Asterisk or Cisco) and have the Asterisk PBX only

Hi, Trying to set up a SIP environment with Asterisk - T1/PRI on Cisco 2811 - PSTN (Teltone TSP). SIP call looks working and I am able to make call from SIP phones to PSTN analog phones. But I have troubles with the Call from PSTN to the SIP phones. I guess the problem is the dial plan. I am using four digits extensions (2301, 2302,..., 2xxx) on the Asterisk for the SIP phones and the full

I'm experimenting (using for the first time) with using a cisco3620 to connect to the PSTN via a channelised E1 interface, with * handling all of the SIP calls. If anyone has any installation tips / help / documentation I would be most appreciative :) However, my first question is this: when I am in the setup, I see the following: Current interface summary Controller Timeslots

I have been transcoding a group of panoramic videos using ffmpeg2theora 0.26 i just completed transcoding Naples Cycle HDV.vwmovie the resulting video has some strange colors in it the source video can be got from http://www.eyesee360.com/videowarp/examples/ the resulting images and the theora file can be download from http://www.lightningridgecommunity.com/images/ tom at

Has any one used the Ipvolution tdm120 cards i am intrested to know how well it works and how well the on board dsp's work. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050901/208c5541/attachment.htm

Hello, I have a linux box with the following S/W versions: CentOS release 5.2 (Final) Linux ns.hostname.ro 2.6.18-92.1.13.el5 #1 SMP Wed Sep 24 19:32:05 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux Version 3.0.28-1.el5_2.1 My server has 2 IP interfaces, eth0: with the public ip address and br0: for the private subnet. Br0 being a bridge ip interface between eth1 and tap0 ( for openvpn ). Now my

Hey gang, We currently have a class 3 switch (CSX) that..well..it sucks. It does terrible CDR writes, doesn't support LCR, the list goes on and on. We want to replace this with several asterisk boxes each running one or two 4 port PRI cards. The problem is: I can plug in 20 PRI lines into the CSX (from PSTN) and have 1 come from CSX into asterisk. If 1 call comes in on each of the 20 pris,

Hi i'm trying to connect to the PSTN in the following way sip ATA -> * -> gnugk -> Cisco AS5300 -> PSTN I'm using asterisk CVS-HEAD-06/01/05-14:33:15 running over RH EL3 Asterisk-Oh323 0.7.2 pre1 Open H323 v1.13.5 pwlib v1.6.6 and I'm having a lot of trouble, gnugk and * both have public ips and are not behind any type of firewall, the sip ATA is behind a firewall and

I'm stuck running a old copy of asterisk because something strange is going on in later versions of the CVS.. When I call in from a PSTN into my cisco 2610XM gateway which then routes the call to my asterisk box via sip.. Asterisk can no longer process DTMF tones generated by the calling party. This affects DISA, prompts and menus.. Has anyone else had this problem?? and use.. I DO have

Dear all, Did anyone successfully test T38 fax pass thru to Cisco as53xx? We've tried 1.2.4 with latest patch and latest svn trunk and T38 patch but still not work. Reinvites from Cisco are correctly passed back to the originating gateway, but fax never able to connect. Cisco IOS 12.3.x configuration voice service voip fax protocol t38 ls-redundancy 5 hs-redundancy 2 fallback

All, I know you can use, say, a 2620 w/2 port FXO card as a SIP gateway. Clearly you can use the 5300, 5800, and MGX8850 too. Does anyone know which cards, if any, exist for a 7206VXR to act in a similar capacity, either as a T1/PRI, DS3, or POTS FXO/FXS? What other Cisco routers can act as SIP gateways today? Thanks, Dave

Hi all I am looking at implementing asterisk at a company with two ISDN bricks (60 lines). I know that the VoIP will absorb at least on brick worth of lines but that still leaves me with a need for 30 ISDN lines. As far as I can tell most of the Digicom cards have 4 FXS ports and I've read on this list that at most two could coincide in a box simultaneously without causing an interupt

Hello, are the gsm codecs in Cisco as53xx or 36xx (gsm, gsmfr) copatible with Asterisk's gsm codec? Thanks in advance, Thomas

Stock icecast, Sightly tweaked GStreamer (waiting for some bug fixes to get packaged). A script. An HDV cam. HTML webpages that remote attendees go to to click the video and watch. Done :-) Happy to send the script... Monty