similar to: TE110P w/ Dell SC1420 ... any problems out there?

Hello every body, I ve installed Trixbox 1.2 on "DELL OPTIPLEX GX 240", i upgreded it to the latest version. I've 2 cards installed in the same pci channel via a bridge or plug i don't know exactly what's his name( but a card (1 pci) that gives 2 pci channels) the first card is TDM400P: it's ok the second is TE110P: it's not ok . No led is on neither the red nor the

Hi, what new Dell servers are compatible and KNOWN to work with Digium TDM cards? I've looked at Digium's compatibility list at http://www.digium.com/index.php?menu=compatibility. Does this mean that other Dell servers like SC1420, SC1425, 800, 1800 are working just fine with TDM cards? Can someone clarify this? Thanks -David

-----Mensaje original----- De: Mario Montiel [mailto:mariomontiel@grupocsi.com.mx] Enviado el: Viernes, 26 de Mayo de 2006 10:29 p.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] DELL PowerEdge 2850 and TE4110P and TE110P I have many problems with this server and two cards TE4110P, because after several minutes one of two cards stays out without

Hi list, I have a terrible noise issue with Dell SC1430 + Digium TE110P. The digium card is not sharing interrupts with any other device, as I saw in Dell's BIOS and also with "lspci -vb" command. After changing coax wire, UTP, balum, digium card ... I have found that the problem is in Dell box, so now I'm running the same Asterisk config in other server with the same

Hi All Before I go out and buy a DELL PowerEdge 2850 has anyone had problems (or any other useful experience) getting a TE411P to work with it. I also have a legacy TE110P. Has anyone had problems with this combo. -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The

Hello, Digium support kindly proposed to ship a TE120P card to help resolve the issue. I plugged in the card, and introduced the loopback plug. I cleared the red alarm for a while and then i started seeing alarm switching from Yel/Recovering to Blue/Rec with a lot of IRQ Misses. I call Digium that assisted us, and we noticed IRQ sharing with the VGA adapter and the Ethernet port. I changed

Hi, I wonder if anyone is using Digium's TE110P card on an E1 connection. I have been try to, but so far it wasn't much of a success. It only works more or less in EuroISDN as PRI CPE. And even that config gives me some trouble with channel negotiation. My current config: *zaptel.conf:* span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=be defaultzone=be *zapata.conf:* [trunkgroups]

Hi folks, I've already searched the mailing list but no one else seems to have my same problem. I'm using Asterisk with the following configuration: Fedora Core 4 (but I also tried Fedora 3) 1 Digium TE110P 1 TDM40B 1 HFC-S 'Cologne' bristuff 0.2.0-RC8o (zaptel 1.0.9.2) I compiled right, I can load kernel modules but when I try to unload wcte11xp module (the one

Has anyone had any compatibility issues with a TE110P card installed on a Dell Poweredge 1950? I noted the following error on the LCD display of the Dell Poweredge 1950: E1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0,

Hi, Been asking google and browsing the lists but haven't found any answers for this. I've connected a TE110P E1 using EuroISDN to a PBX (for me at the time unknown model). All is fine _except_ when placing calls to mobile phones (which takes too long, more than 2 seconds it seems) asterisk seem to be impatient giving up saying the curciet beeing busy. So, what I'm looking for, is

Hi All, I have a TE110P in E1 mode, in a dell poweredge 250. The 30 channel E1 supplied is from a telco in Australia, with the following in my zaptel.conf: span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 (yes the provider has NOcrc4 for some reason) After installing the latest cvs libpri and zaptel, I successfully loaded the kernel modules. The card is verified as not sharing an

I think you can use normal network cable, I'm from Italy and it's work perfectly Good luck -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Milo? Kocbek Inviato: mercoled? 27 luglio 2005 10.04 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] TE110P Cable Pin Out

Does anyone know if you can have multiple TE110P cards in one chassis? -Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061011/adbceeb5/attachment.htm

jglucky@blueware.net wrote: > Has anyone attempted or have had any issues getting Asterisk and > Digium cards working on a Dell SC420 server? I have it up and running on 2 SC420's with TE110P cards. Haven't had any problems as of yet (knock on wood). Dell SC420 TE110P 2x40 GB SATA drive in a RAID 1 setup (Linux 2.6 kernel needed for SATA drives; turn off RAID detection in BIOS).

Guys. What do you think about Dell hardware and Asterisk? Whos using it, comments, any special specs recommended or models?

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no

Fedora Core 6 regards, Pablo. On Thu, Mar 08, 2007 at 05:01:15PM -0800, Jose Bertuzzi wrote: > Hello Everyone, I checked with zttool that sometimes after the machine boots the order of the boards is changed like this: > ??? Alarms Span ??? OK Digium

Im using a TE110P as a trunk to a Panasonic KD-500 everything works well.....but Im having this problem where one of the channels becomes blocked with a partial phone number after about two days. So if the channel that becomes blocked is channels 23 no calls can get in. If the channel that gets blocked is 22 then one call can get in. The only way to clear this is to reboot the server. This

Hi everyone I have a Digium card TE110P and after plug it, turn on the computer and configure, the LEDs don't light up in spite of what Digium FAQ says about the LEDs: When will the LED's light up on my TDM400P/TE110P/TE2XXP/TE4XXP? ... The TE110P LED's will light up RED when the span is configured and kernel module is loaded. If configured correctly and a circuit or channel bank is

Hi All, I have configure my Asterisk as follow (using Asterisk@home): [zaptel.conf] span=1,1,0,ccs,hdb3,yellow bchan=1-15,17-31 dchan=16 loadzone = uk defaultzone=uk [zapata.conf] [channels] switchtype=euroisdn pridialplan=local prilocaldialplan=local internationalprefix=00 nationalprefix=0 usecallingpres=yes busydetect=no ; not need on pri callprogress=no ; was yes but wiki says experimatley