similar to: x100p question for incomming calls

I have just purchased a 2nd hand X100P, if I do a ztcfg -vv I get: "Zaptel Version: 1.4.0 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured." My understanding of the above is that the zaptel driver has detected the card. What do I now need to do, in order to get an incoming call to work with

Yo all, I have a problem with a Dutch (KPN) PSTN-line, connected to an X100P. The call wil sound OK at first, but after 10-20 minutes, the audio will start to crackle. Soon after that, this crackle turns into a continuous noise and the parties won't be able to hear eachother anymore. It also sometimes happens that the party on the TDM400P hears a very loud, short-delay echo of themselves,

Hi, I know this seems to be a hit topic at the moment but no matter where I look I can't find an answer. I have got a simple Linux fedora core 2 installation, asterisk running and 2 X100Ps' and 1 TDM400 with the FXS modules (thou I've taking this out to simplify things). Sometimes and not always after hanging up on the Zap channel the box will do a kernel panic, or just loading

(hardware in my computer: linux, asterisk, x100p, grandstream budge tone-100 ) Hi, When i run #asterisk ?v It show me a messages but when i try to incomming the call it show me that. Apr 11 07:59:01 NOTICE[81926]: chan_sip.c:3140 sip_reg_timeout: Registration for 'me@192.168.0.6' timed out, trying again Apr 11 07:59:01 NOTICE[81926]: chan_sip.c:5568 handle_request: Registration

I installed SeLinux in warn mode. HOw do i check to see what it is wanring about? This wil help me in make a decision to turn it to active mode..:) -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their

How do I do this? Ive looked on lunix pages but ive seen that I have to change the config of the kernel build, is that right? Or do I need a different kernel altogether? Also the sites say the 8K is about as large as you should take the stack :oS Also someone posted that I need to sort out the IRQs, is this part of linux? As you can guess I'm kinda new to linux, although ive used it for 2yrs

I've just installed Redhat 8.0 + latest updates on a Intel PC and am trying to install the R 1.6.1-2 rpm but get the following: # rpm -i R-1.6.1-2.i386.rpm warning: R-1.6.1-2.i386.rpm: V3 DSA signature: NOKEY, key ID 97d3544e error: Failed dependencies: libtcl.so.0 is needed by R-1.6.1-2 libtk.so.0 is needed by R-1.6.1-2 What am I missing? Hubert -- Hubert Wong, PhD

Hello all, I have a question. I have an asterisk box setup with an x100p card installed. I have about 3 VoIP phones connected to it. The x100p is connected to my pots line. I also have regular phones connected the the pots line as well like most normal people would. When I get an incomming call all the regular phones ring and my VoIP phones ring. This is good. My question is this. Say

Hello List, I have a problem with the CA on my Puppetmaster. This Puppetmaster is connected to different Networks with different sub domainnames. The Puppet clients connecting via different Interfaces. There is no routing between subnets. Only one subnet can connect successfully. This is because the subject in the Certificate is the name of this subnet. All other clients get: Could not

Yes - the problem was a missing signalling line in zapata.conf. Now in and out work. Also, it was news that "reload" from the console doesn't reflect changes made in zaptel and zapata.conf entries. Any other config files that it doesn't reload? >From: "Asterisk@Home" <asteriskathome@yahoo.com> > >Did you go into AMP and configure some place for

Hi all, Running R 0.90.1 on a RH 6.1 system. Installation of the integrate_2.1-2 package went smoothly. My code contains a loop in which integrate() is called several times in each pass. I get a segmentation fault after what seems to be a random number of calls to integrate(). Debug output shows: Program received signal SIGSEGV, Segmentation fault. promiseArgs (el=0x40276414,

Hubert Tong <hubert.reinterpretcast at gmail.com> wrote on 10.06.2020 23:51:54: > From: Hubert Tong <hubert.reinterpretcast at gmail.com> > To: Kai Peter Nacke <kai.nacke at de.ibm.com> > Cc: llvm-dev <llvm-dev at lists.llvm.org> > Date: 10.06.2020 23:52 > Subject: [EXTERNAL] Re: [llvm-dev] RFC: Adding support for the z/OS > platform to LLVM and clang

Hello, after an update I've got troubles with nut. It is not able to connect via usb to our UPS anymore. I dont know wether it is the nut update or the kernelupdate or both. In any case, it is difficult to get new rpms for CentOS. So if someone has an Idea, what I can try to solve this Problem: please help. Atached are relevant information. Best wishes, Hubert Krause My versions:

On Thu, Jan 23, 2020 at 11:37 AM David Greene <greened at obbligato.org> wrote: > Hubert Tong <hubert.reinterpretcast at gmail.com> writes: > > >> I read this as the refresh being an entirely new GitHub PR. Is that > >> right? Normally I would expect the same PR to be used but the rebase > >> would cause a force-push of the branch which would update

Hai, ? After serveral setups and testing if completed a successfull install of sernet samba?4.1.3 which joined a windows 2008R2 AD domain. You can use?this also on on ubuntu 12.04. ? This is the "HowTo"?how i?did my setup. questions improvements, please add them and share them. ? # ( date 23-12-2013 ) # Sernet samba 4.1.3 on debian Wheezy # Windows 2008R2 AD DC , with dhcp and

On Wed, Jan 22, 2020 at 4:40 PM David Greene <greened at obbligato.org> wrote: > Hubert Tong <hubert.reinterpretcast at gmail.com> writes: > > > The update process in Phab in rather manual and it does lead to more > noise. > > The GitHub force push risks loss of context for earlier comments (not > just > > in terms of display, like viewing older comments

When trying grep(), I get the following: > grep("[a-z]", letters) Error in grep(pattern, x, ignore.case, extended, value) : POSIX regular expressions not available I can't find any pointer in the installation kit. How can I configure R to make it "avaliable"? I run R in an Irix 5.3 system. Thanks in advance! --

> > Okay, it's just not immediately undefined behaviour. The C model has more > issues because of the problem with how "trap representation" is defined > (which precludes trap representations for unsigned char, two's complement > signed char, etc.). This interpretation is further stressed because C only explicitly ascribes > undefined behaviour to trap

Ah. IMHO, yes we should disable it until it's correct. On Fri, Apr 7, 2017 at 1:28 PM, Krzysztof Parzyszek <kparzysz at codeaurora.org > wrote: > I'm asking if people are ok with it. :) > We've had customer reports that can be tracked down to this issue, so this > is something we'd really like to working (at least in terms of correctness). > > I can come up

Hello, I'm trying to port the S package "print.display" to R. The porting procedure seemed to work, but when I say library(print.display) or library("print.display"), then none of the functions is available. May be, it's because of the dot in the package name? What could have happened? The help information is available. BTW: How can I look up wether the package is