similar to: Digium TE405P, caller id and migration to *

Displaying 20 results from an estimated 7000 matches similar to: "Digium TE405P, caller id and migration to *"

2005 Jul 27
5
cdr_mysql does not write to mysql db
Hi, I configured cdr_mysql (addons 1.0.9) to write the cdr records to the mysql db. The problem is that no records are written to the db. Why? I can import the csv-file to the db. so i assume the db is setup correct. Is there any chance to get debug from cdr_mysql to find his problem? This is my cdr_mysql.conf file: [global] hostname=localhost dbname=cdr password=passw0rd user=root ;port=3306
2005 May 06
2
Transparently Routing German pri through Asterisk
Hi, at the moment we have in Avaya Integral PBX with german pri (30 lines). We want to smouthly migrate to an Asterisk server. For this reason: Is it possible to route the external german pri (E1) through Asterisk server to that Avaya PBX? I think at first we need a Digium e1 card 4-Port. But how do we have to configure the routing of the whole PRI? I really would appreciate any sample
2005 Jul 13
2
No channels after starting asterisk
Hi, i am running * 1.0.9 with a newer version of the TE405P. Modprobe wct4xxp and ztcfg are OK. zap show channels only shows me the following. my zapata.conf: [pstn] switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown usecallingpres=yes busydetect=no ; not need on pri callprogress=no ; was yes but wiki says experimatley could be produce hangups callwaitingcallerid=yes ; show
2005 Mar 17
3
Compilation problem chan_capi and Eicon Diva 4Bri
Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:
2005 Jun 13
2
Need Help with pickup *8
Hi, when i use the *8 for the call pickup the call i fetch is directly connected and i can't see the callers number. What i want is that the call in the first only rings at my phone and in the second i can see the callers number before i am connected. I am using a polycom 500 ip phone. Is this a special polycom problem? Regards, Kib
2004 Apr 28
2
About TE405P Digium Card
Hi Everybody, Is there anyone who already uses Asterisk with TE405P card? Is this card going well with the old E400P or T400P drivers? Are there a lot of differences? In the card's data sheet writes this sentece: "Digium has designed the TE405P to be fully compatible with existing software applications..." Is this meaning the the old drivers are also OK for this card? Thank you
2005 Sep 27
2
Review: Digium TE405P v2
Hello, We have finished our tests of the new Digium firmware on the quad T1 cards(TE405P/TE410P). Overall it is a big improvement over the version 1 firmware. Here's the review: http://astguiclient.blogspot.com/2005/09/digium-405p-v2-review.html MATT--- -------------- next part -------------- An HTML attachment was scrubbed... URL:
2006 Feb 23
1
digium TE405P and intel motherboard
Hi, Can please someone help me. I have successfully installed Asteriskathome 2.5 on a server with a Intel Server Board SE7525RP2. May issue is after placing the TE405P in the server, it is not booting anymore. Has anyone in here have the same experience? Can someone please point me to the right direction. Thanks in advance, Leonimar __________________________________________________ Do You
2006 Jun 02
1
lspci doesn't show digium card te405p
lspci dont show Digium card. The motherboard is Intel 945gnt. 00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02) 00:02.0 Display controller: Intel Corporation 945G Integrated Graphics Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev
2005 Feb 23
0
Digium TE405P and Cirpack Switch
Hi, I've got an * box with 4 E1 (TE405P) and a Class 4 Cirpack switch (www.cirpack.com). <IP Network>--<*>--<Cirpack>--<Public PSTN Network> ISDN interco is EuroIsdn, ports are configured ccs, hdb3, crc4. Cirpack is Network, * is Terminal/User. As I encountered some pb with Sip to Zap transcoding (* to Cirpack way poor quality, the other way fine), I tryed to
2006 Nov 30
0
Digium TE405P dtmf issue
Hi Group, I have an asterisk running as media gateway with a Digium TE405P 2nd Gen rev 2 with echo cancellation. It is interconnected to a telco carrier via ISDN Pri. The voice quality is clear except that sometimes a hear a beep sound that occure around 5 to 10 secs in the middle of the conversation. When I check the logs in the asterisk, I found this. Nov 30 00:48:38 DEBUG[27705]
2005 Aug 10
0
Problem with setting the right dialplan for german PRI E1 on TE405P from digium
Hi, I tried so many but can't find the right setting for my problem. What do i have to configure so that the complete number including extension is displayed at the called party. At the moment the called party only sees the number 7837-0 not the 7837-134. Everything works fine. Incoming and Outgoing calls. Is there someone who configured a german pri with that digium card? I really
2006 Mar 28
4
ISDN and Analog DIAL UP Connection Through Asterisk and Digium TE405P
Did anybody know, Is it possible to establish a ISDN DIAL up Connection and Analog Dial up Connection (V90) trough asterisk with Digium TE405? Thanks a lot for help. Nico Giefing -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060328/3b657058/attachment.htm
2004 Apr 30
1
Configuring Digium TE405P for use in Germany
Hello all, I really checked voip-info.org but it still seems to be not very easy and I just hope that there is anybody with a simular config. We have one PRI (euroisdn with 30 channels) coming from the DTAG. The second PRI should be connected to a Siemens Hicom 150E Pro Office PBX (was cheaper than a channel bank :-) Carrier ----S2M------ * -----S2M------Siemens | |
2006 Nov 17
0
Problem with Asterisk 1.4.0-beta3 and Digium TE405P
Hope this is the right place to report/ask for help... Have have a 1.2.7.1 installation running reasonably happily for a while. Thought we might give 1.4.0b3 a go. Ran it on a local test machine (that has the single port card) and all was well. However, when I run it on a machine with the 4-port card, it has trouble with Zaptel. I attach some diagnostics and welcome any suggestions (including
2005 Jul 19
3
Which ATA adapter to use with an analog fax maschine?
Hi, i need an recommandation for an ATA adapter to use with an anlog fax maschine. I would appreciate any hints. Regards!
2004 Dec 21
6
Caller ID - TE405P - Telstra Onramp 10 - Australia
I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed "/DEFAULT_CIDRINGS 2"/ Is there something i'm missing ? My Cisco 7960 just shows "asterisk" Thanks, Nathan [zapata.conf] context=incoming usecallingpres=yes relaxdtmf=no rxgain=0.0 txgain=0.0 busydetect=no pridialplan=local usecallerid=yes callerid=asreceived
2005 Jan 29
2
TE405P w/ Intel SE7210TP1_E Motherboard
Hello, I'm looking at building a couple new PRI Gateway boxes using TE405P cards, and was wondering if anyone has had any experiences (good or bad) with the Intel SE7210TP1_E motherboards from Intel. General Technics builds some really nice (and cost effective) 1U servers based on the board: Server: http://www.gtweb.net/gt637.html Specs:
2012 Oct 12
3
[LLVMdev] Dynamically loading native code generated from LLVM IR
On 12 Eki 2012, at 20:00, Jim Grosbach wrote: > > On Oct 12, 2012, at 7:07 AM, Baris Aktemur <baris.aktemur at ozyegin.edu.tr> wrote: > >> Dear Tim, >> >>> >>> The JIT sounds like it does almost exactly what you want. LLVM's JIT >>> isn't a classical lightweight, dynamic one like you'd see for >>> JavaScript or Java.
2005 Jun 23
1
Help with Dial multiple channels simultanously
Hi, the following from extension.conf does not work correctly: exten => 301, 1, Dial(SIP/455&SIP/456, 15) That is the console output: -- Executing Dial("mISDN/1/105", "SIP/455&SIP/456&SIP/456| 10") in new stack -- Called 455 -- Called 456 -- SIP/455-46a8 is ringing == Spawn extension (incoming, 301, 1) exited non-zero on