Alex Lake
2006-Nov-17 05:35 UTC
[asterisk-users] Problem with Asterisk 1.4.0-beta3 and Digium TE405P
Hope this is the right place to report/ask for help... Have have a 1.2.7.1 installation running reasonably happily for a while. Thought we might give 1.4.0b3 a go. Ran it on a local test machine (that has the single port card) and all was well. However, when I run it on a machine with the 4-port card, it has trouble with Zaptel. I attach some diagnostics and welcome any suggestions (including requests for more information). We're running this on a Del SC430 with Ubuntu 5.10. Thanks! Alex ----- root@m900a:/etc/modprobe.d# /etc/init.d/asterisk start Starting Asterisk PBX: Notice: Configuration file is /etc/zaptel.conf line 22: Unable to read Zaptel version information. Zaptel Version: ?o???v???wHV?????V??`v?? Echo Canceller: Configuration ===================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 4: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) 124 channels configured. ZT_CHANCONFIG failed on channel 1: Inappropriate ioctl for device (25) ------------------------------------------------------------ root@m900a:/etc/modprobe.d# strace ztcfg execve("/sbin/ztcfg", ["ztcfg"], [/* 23 vars */]) = 0 uname({sys="Linux", node="m900a", ...}) = 0 brk(0) = 0x80a2000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) old_mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fa6000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=40467, ...}) = 0 old_mmap(NULL, 40467, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f9c000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`3\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=136976, ...}) = 0 old_mmap(NULL, 139424, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f79000 old_mmap(0xb7f9a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x20000) = 0xb7f9a000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260O\1"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=1229936, ...}) = 0 old_mmap(NULL, 1236124, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e4b000 old_mmap(0xb7f73000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x128000) = 0xb7f73000 old_mmap(0xb7f77000, 7324, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f77000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e4a000 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e49000 mprotect(0xb7f73000, 4096, PROT_READ) = 0 set_thread_area({entry_number:-1 -> 6, base_addr:0xb7e496c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable :1}) = 0 munmap(0xb7f9c000, 40467) = 0 open("/dev/zap/ctl", O_RDWR) = 3 brk(0) = 0x80a2000 brk(0x80c3000) = 0x80c3000 open("/etc/zaptel.conf", O_RDONLY) = 4 fstat64(4, {st_mode=S_IFREG|0744, st_size=256, ...}) = 0 mmap2(NULL, 131072, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e29000 read(4, "span=1,1,0,ccs,hdb3\nbchan=1-15\nd"..., 131072) = 256 read(4, "", 131072) = 0 close(4) = 0 munmap(0xb7e29000, 131072) = 0 ioctl(3, 0x40244a12, 0x80a0a60) = 0 ioctl(3, 0x40244a12, 0x80a0a84) = 0 ioctl(3, 0x40244a12, 0x80a0aa8) = 0 ioctl(3, 0x40244a12, 0x80a0acc) = 0 ioctl(3, 0x80844a05, 0xbfcbaaec) = 0 ioctl(3, 0x404c4a13, 0x808daac) = -1 ENOTTY (Inappropriate ioctl for device) write(2, "ZT_CHANCONFIG failed on channel "..., 71ZT_CHANCONFIG failed on channel 1: Inappropriate ioctl for device (25) ) = 71 close(3) = 0 exit_group(1) = ? --------------------------------------------------- /etc/zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 span=2,2,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 span=3,0,0,ccs,hdb3,crc4 bchan=63-77 dchan=78 bchan=79-93 span=4,0,0,ccs,hdb3 bchan=94-108 dchan=109 bchan=110-124 loadzone=uk defaultzone=uk