similar to: h.323 Call problem asterisk to\from lucent(avaya) definity

May be force be with you hello, We want to make H323 calls beteen asterisk and avaya(lucent) pbx. We create node-name,H.323 signaling group,trunk, but we can not make H.323 calls to asterisk. Also no warnings exist in debug. Instead of giving the IP of Asterisk ,i give my computer's IP and run SJPhone ith H.323 GUI. In this time, connection is established. SJPhone accepts H323 calls but

Hi all, I am new to asterisk, but experienced with Linux and Avaya/Lucent G3R hardware/software. We currently have a large inventory of spare Lucent 64XX phone sets. I'm considering setting up an asterisk system for a remote office, and would like to use the Lucent sets because they are cheap, and familiar to my end users. Does anyone know of a card that can drive these sets? I think

I'm trying to connect an Asterisk system to an Avaya Partner ACS R6 system. The problem I'm having is that I cannot get the partner system to get CallerID over the T1 modlue. The partner is using the T1 with E & M signalling (which I don't think can be changed), and whatever I tried didn't work. My only option right now is to get FXS ports on the Avaya side plugged into the

Calling all Definity admins, Got a few questions about Definity -> Asterisk interoperability. 1) What are the options for integration? Can I hand off extensions from the Definity and vice versa? 2) Anybody have any working configs they would like to post? I've found and read the legacy integration on the wiki about the two systems. I've also googled and found a few threads that were

We have had quite a bit of success with our T100P and TE410P cards interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3 using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in 5ESS mode). In the near future, I may also need to interface to a Definity via a T1. I was planning to use PRI--is that an option for you on your switch? -----Original

Hi everyone, We have been working with Asterisk for a while now and would really like to expand its capabilities by fully integrating it with our Definity g3si and are wondering about other peoples experiences with similar setups. Thus far we have only been able to achieve a partial 1 way integration, but ultimately would love to route inbound voip calls to the asterisk out of the lucent.

Hey Everyone, Thanks for helping with this integration, I finally got it working! I have inbound and outbound dialing from/to the asterisk box via a pri line! I would definitely like to contribute this information to the wiki so we can fill in some of the information gaps there. In the short term I wrote up what I did and scanned in all of the nescessary screen prints from the lucent into a pdf

Hi Everyone, So I have been further exploring the integration of our asterisk server and our lucent definity g3si system. I took the suggestion of setting up an isdn-pri line added the two way tie trunk and the signalling group, but can't seem to get the PRI signalling working on the asterisk correctly. I've set pri type to network on the lucent, and pri_cpe in zapata on the asterisk, but

Has anyone tried to replace Witness or Nice recorder with asterisk. I saw a nice article on voip-info.org on how to replace voicemail server for Avaya Definity with asterisk. The idea behind is to record not only the external channels but also extension to extension (three way calling for which the third leg is asterisk PRI will do) Any suggestion will highly help Sam -------------- next part

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

Does Asterisk work with Lucent or any other PBX phone systems????

Yes, I can make a call on that extension from other definity phone, if you mean it. -----Original Message----- From: Ken Godee [mailto:ken@perfect-image.com] Sent: 30 ÉÀÌÑ 2004 Ç. 19:14 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Connecting Asterisk and Avaya Definity By E1. Incoming work, but not outgoing Roman Bessyadovskii wrote: > Hi All. > > I connect

Hi, I'm a lab manager / supervisor at our labs. We've had Asterisk in use for over a year directly hooked to the PSTN - a no brainer for configuration (although I had to fix some AT&T specific things in libpri). Right now I have two big challenges. One is to hook our box up lineside to a Lucent Definity G3R. Avaya is chasing this from their end, but we had the highest level of

Hi I've a softphone account to a AVAYA H.323 system, basically, it has a numeric ID (which is the extension number) and a numeric password. Instead of using the default AVAYA softphone (H.323), can I make asterisk as a H.323 client and login to the AVAYA system via any one of its h323 modules? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi ! I am trying to connect Asterisk with Avaya Definity. I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything Example Asterisk ---> Avaya --

The company I work for has deployed an Avaya IP phone system. They have deployed the Avaya 4602 and 4620 IP telephones. They might be sending me one of these phones for use in my home office. Question: Can I make this IP telephone register and work with my Asterisk server? I don't know if it is a SIP phone? I searched thru the Avaya site, but can't find whether it's a SIP phone or

Hi everyone, I was wondering if anyone on this group has successfully integrated Avaya 8300 or 8700 and Asterisk using H.323 trunk and would be willing to share configurations and/or comment on the voice quality achieved. Currently we have Avaya 8300 integrated with Asterisk over a Q.SIG trunk, but we need to put Asterisk in a different geographical location from the PBX and need to explore

This is my first post, so please feel free to direct me to another list if needed. I am in the early stages of researching Asterisk. I administer a small Avaya Definity G3 switch (~400 users). Can anyone point my to resources/documents/actual implementation notes of using Asterisk's voicemail with an Avaya Definity switch? Many thanks, Brian Hudson --------------

I am tasked with linking an Avaya Definity switch to an asterisk box using it's IP card that handles H.323. All my googles turn up a lot of results but nothing recent. I am able to find instructions but they are dated from 2005, and often fail halfway through. What is the best way to achieve what I want, which is two way calling between the Avaya switch and Asterisk server using h.323, and

Hi All. I connect asterisk and definity by manual at www.voip-info.org/tiki-index.php?page=Asterisk%20Avaya. (I just only have E1, not T1 card). I see, that card work (in definity trunk status, and at asterisk == D-Channel on span 1 up -- B-channel 1 successfully restarted on span 1 -- B-channel 2 successfully restarted on span 1 -- B-channel 3 successfully restarted on span 1