asterisk users - Jul 2004 - Connecting Asterisk and Avaya Definity By E1. Incoming work, but not outgoing

Hi All.

I connect asterisk and definity by manual at
www.voip-info.org/tiki-index.php?page=Asterisk%20Avaya.
(I just only have E1, not T1 card).

I see, that card work (in definity trunk status, and at asterisk

== D-Channel on span 1 up
    -- B-channel 1 successfully restarted on span 1
    -- B-channel 2 successfully restarted on span 1
    -- B-channel 3 successfully restarted on span 1
    -- B-channel 4 successfully restarted on span 1
    -- B-channel 5 successfully restarted on span 1
    -- B-channel 6 successfully restarted on span 1
    -- B-channel 7 successfully restarted on span 1
    -- B-channel 8 successfully restarted on span 1
    -- B-channel 9 successfully restarted on span 1
    -- B-channel 10 successfully restarted on span 1
    -- B-channel 11 successfully restarted on span 1
    -- B-channel 12 successfully restarted on span 1
    -- B-channel 13 successfully restarted on span 1
    -- B-channel 14 successfully restarted on span 1
    -- B-channel 15 successfully restarted on span 1

(Configured only 15 channels)

Incoming call, from definity is work ok, but when I try outgoing call, I
recive

  -- Executing Dial("SIP/1015-870f", "Zap/g1/2073") in new
stack
    -- Called g1/2073
    -- Channel 1, span 1 got hangup
    -- Hungup 'Zap/1-1'
  == No one is available to answer at this time

How fix it?

Configs:
Extensions.conf
exten => 1015,1, Dial(SIP/1015,10,t)

exten => 93261090,1, Dial(Zap/3/93261090)
exten => 2073,1, Dial(Zap/g1/2073)

sip.conf
[1015]
type=friend
secret=phone
host=dynamic
restrictcid=no          ; To have the callerid restriced -> sent as ANI

Zapata.conf
[channels]
context=default
switchtype=national
signalling=pri_cpe
group=1
channel => 1-15

/etc/zaptel.conf
defaultzone=us
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16

Roman Bessyadovskii wrote:
> Hi All.
> 
> I connect asterisk and definity by manual at
> www.voip-info.org/tiki-index.php?page=Asterisk%20Avaya.
> (I just only have E1, not T1 card).
> 
> I see, that card work (in definity trunk status, and at asterisk
> 
> Incoming call, from definity is work ok, but when I try outgoing call, I
> recive
> 
>   -- Executing Dial("SIP/1015-870f", "Zap/g1/2073") in
new stack
>     -- Called g1/2073
>     -- Channel 1, span 1 got hangup
>     -- Hungup 'Zap/1-1'
>   == No one is available to answer at this time
> 
> How fix it?
Do you have the "Dial Plan" set up properly
on the Definity side?