similar to: Polycom ring volume

Have a strange problem... When a C7960 calls the Polycom ip600, the ip600's first line button blinks, the ip600 display shows the proper callerid, but the phone does not ring at all. If I call the same ip600 from a bt102, the ip600 rings properly. If I call the same ip600 from another C7960, the ip600 rings properly. All phones and asterisk are on the same lan within a few feet. The

Does anybody know how to set polycom's default ring volume ? Everytime you restart a polycom phone, ring defaults to a very low volume setting which is kind of annoying having to set everytime you reboot. Any hints?

> I've contact Polycom via their web form and they emailed me back > around 2 > days later. We've purchased all of our phones via authorized > resellers. > Dunno if that makes a difference or not. > > My question was about the button programability and their response was > that the manual was incorrect. You can not program buttons to have > extended

Hi, I am new to asterisk , i am getting the following error,& the /etc/zaptel.conf file entry is as follows defaultzone=us loadzone=us span=1,1,0,esf,b8zs,yellow bchan=1-23 dchan=24 Parsing '/etc/asterisk/zapata.conf': Found Jul 1 18:33:35 WARNING[16384]: chan_zap.c:664 zt_open: Unable to specify channel 1: No such device or address Jul 1 18:33:35 ERROR[16384]: chan_zap.c:5296

Could not find your post for 4 months ago. -------------- Original message -------------- From: "Anton Krall" <akrall-lists@intruder.com.mx> > Yes, check a post that I made about 4 months ago, I posted the cofig for > setting the speaker, handset and ring volumes .. > > |-----Original Message----- > |From: asterisk-users-bounces@lists.digium.com >

>Kind of OT here, but just out of curiosity, how do you email them? Do >you have an actual address, or do you just use the form on their web >site? I've sent a bunch of requests via that form, and even though it >says I should receive a response, I never have. I've tried going >through a couple of resellers, too, and haven't gotten anything. I'm >hoping you

I am getting ready to install Asterisk and I was looking into the Polycom IP600 phones. I spoke with Polycom sales to verify the multiple line appearance and they said it would work. More specifically, if lines 1-3 all contain the same SIP registration info, the Polycom will only send out 1 SIP registration to the server and then handle the calls ringing on multiple lines. I was wondering if

Hello list: I have a very odd problem. Seemingly randomly, my Polycom IP600 phones will ring without a call being placed to it. That is to say, a random phone will ring. Nothing shows up under Caller ID. Even the buttons that light up to show an incoming call do not light up. If you pick up the handset, you can hear the phone ring through the speaker. Hanging up the phone makes it stop

The answer is yes, I think, but I don't recall precisely how off the top of my head, and I'm walking out the door in a moment. The phone will hold more than a dozen distinct ring tones which you can create for yourself, and you can have asterisk direct it to use a ring tone independently of line appearance. The most direct way would be with the SIP Alert-Info field, but the phone itself

This is my first foray into SIP telephony, so be gentle. :-) The Polycom SoundPoint IP 501 phones have been fantastic so far. I still have a lot to learn when it comes to them, but the manual seems pretty extensive and so far Asterisk has been playing well with them. I have a need to be able to identify incoming calls based on some factor (could be time of day, caller ID, dialed number, it

Hi all, Has anyone made up custom ring tones for the Polycom SIP phones? We use different rings for different lines, but the ones it comes with are all very similar. In the interesting of sharing, here's one I made up for paging: <PAGE_BEEP se.pat.ringer.13.name="Page Beep" se.pat.ringer.13.inst.1.type="chord" se.pat.ringer.13.inst.1.value="12"

Hi, I have was testing some of the different ring types with my polycom 500, and the ALERT_INFO settings. Now when my phone receives a call it won't ring. All the other phones ring fine, and my phone wasn't the only one I rebooted with the changed sip.conf and impd.conf. I have reverted back to a standard sip.conf and impd.conf and I still can not get my phone to ring for any incoming

Hi Anton (et al) - > Well.. I already sent my email to them :) Kind of OT here, but just out of curiosity, how do you email them? Do you have an actual address, or do you just use the form on their web site? I've sent a bunch of requests via that form, and even though it says I should receive a response, I never have. I've tried going through a couple of resellers, too, and

Hi, I am mostly happy with my Polycom IP600 but it apparently needs to check the FTP server every minute. I couldn't find any obvious setting related to that behavior in the configuration files. Any idea how to curb the IP600's spurious network activity? Thanks, -- Lord, protect me from your followers.

I've been noticing that my group of Polycom IP 501 phones seems to randomly reset themselves nearly every night (I guess it usually happens at night, since I've never seen it happen while I've been at work during the day).. When I say "reset", I mean, the hands free volume and ring volume are set to the default and the call logs (received calls, missed calls, placed calls)

Hello, After checking out CVS HEAD from yesterday (for those new PLC/Jitterbuffer patches), I was affected by bug 3795 with my Polycom IP600's. After seing it resolved as of this morning (thanks Mark), I decided to try again... I can answer incoming calls. No problem there. Putting calls on hold, however, results in my Polycom IP600 indicating the call on hold, but the caller does

Hi, I'm using asterisk 1.2.1 on a debian sarge distro. I've followed notes in http://www.voip-info.org/wiki/view/Polycom+auto-answer+config and http://www.voip-info.org/wiki/index.php?page=OptiPoint+600+SIP+-+Distictive+ring+using+ALERT_INFO but I still cannot change ring style via asterisk using exten => 666,1,SipAddHeader(ALERT_INFO="ring3") in extensions.conf . Is it

Passing this along. I got it tonight from a friend: Basis Technology has uncovered a potentially serious issue with the Polycom SoundPoint IP600 SIP phones, which causes them to spontaneously reboot at unpredictable times. It appears that if the amount of current being delivered to the phone falls below a certain threshold, the phone will reboot. Here are the specific circumstances which will

Hi everyone, I have a user that needs a little extra volume on his Polycom IP 601 phone set for all calls (beyond what the volume control currently offers). Is there a provisioning setting for this anywhere? (I'd like to avoid a separate amplifier between the phone and handset if possible.) Alternatively, is there a way to have Asterisk 1.4.x boost the volume to a particular SIP device

BOFH told me he uses it to listen to his co-workers > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Andrew Kohlsmith > Sent: Thursday, February 09, 2006 12:27 PM > To: asterisk-users@lists.digium.com > Subject: SOLVED: Re: [Asterisk-Users] Polycom IP501 with Asterisk - > distinctive