similar to: Dead spa841

Guys. I just unpacked on of the new spa841 I orderd and I was changing the ringtone (and listening to the options) when suddently the phone stopped playing back the tones and now the phone doesn't ring, speaker doesn't work and no ringtone play can be heard. Has anybody had this kind of problems?

Hello. I have a customer that needs to downgrade the firmware on their SPA841 to 3.1.1(a). I can't seem to find the firmware file. Google turned up 3.1.2-something and Linksys is taking a while to get back to me. Anyone happen to have that file lying around? Thanks, Nabeel

Hello All, I have been using the following phones with excellent success inside my lan: Cisco 7960 Polycom IP600 I have also been comfortable with the SPA-3000. I recently got a SPA-841 and the quality is aweful. Even in stock setup, it's like when I speak into the handset I sound like I am very far away. I want to get a hardphone for europe, but I need to be able to use a STUN server, and

Is the list dead, or just quiet all of the sudden? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110420/245f85d4/attachment-0005.html>

Hello All, I am having an odd problem with Armin's chan-capi_cm on builds higher than 7955. It would seem that this happens on anything higher than 7955. What is happening is the isdn is ringing, then asterisk does a goto-if and just hangs. Asterisk itself is ok, but the isdn then rings out or busys out on the other side. Outgoing works fine, this only seems to effect incoming. I

As many of you have probably realized, the spam filtering at @stat.math.ethz.ch has been dead for since yesterday (09-25) ~16:50 till today ~08:30. The sudden death may have been caused by unrelated installation of some perl modules (spamassassin *is* running on perl) by our IT staff. We are very sorry for this event. On the bright side: You have been able to get a glimpse of what you are

Hi Folks, Since there isn't a grandstream forum AFAIK I guess someone here may be able to shed some light on this. Apologies if this is viewed as offtopic.. I think I may have killed the firmware on my Grandstream Budgetone 101. I found a source for the 1.0.5.30 firmware and made the files available over tftp. The phone downloaded the files but now doesn't boot and hangs with a blank

Hello All, Just a question, I have an adit600 and I am looking for a way to pull the incoming cid into asterisk. Does anyone know if this is just not possible via t1? Or is it only available on PRI? Thanks, Greg

Guess who's here to do an Asterisk demo this week without the power supply for his SPA-841. I have an ATA186 with me. Both phones use a 5v supply. Does anyone know whether the supplies are interchangeable? Thanks in advance; sorry for the noise. B.

Hello Dan, Have a look at this link: http://www.adcomcorp.com/asterisk/tellabs I got those pictures up there, may be of help. In essence, 1 pair is either a tx pair or an rx pair. If I recall, Orange and Green should be one side, and blue brown should be the other side. I tried to upload them to the wiki (even 40% size) but they didn't show up for some reason... Files are large on the

Hello All, Has anyone configured bri to answer for only one msn? In essence, when the primary is busy I want to have channel 2 ring. I am using an eicon diva server bri I know I saw it in the windows interface, but don't see it in the linux setup. Regards, Greg

Hello All, I have an iaxy(new version), and while it does the job well, there is one thing I am looking for. I want to be able to specify a dns name on the config, not an ip. This does not seem to work if I try to set it as such. Has anyone come up with a workaround or solution to this? I want to be able to put it on the net, or travel with it, plug and go. The issue is that I am using a

I have a Grandstream GSX-2000 with .. Software Version: Program-- 1.0.0.3 Bootloader-- 1.0.0.3 I tried to do an HTTP update from the Grand Stream web site... After half an hour, I recycled power and now its dead... LED's come on and stay on, screen and buttons are dead. Connectivity to Grandstream.com was always good - whenever I checked (I downloaded the "User Manual" in a

Hello All, I have a tellabs 2572 EC, and I was wondering if anyone with experience can wire this up for me... I have the proper tools and info, but not the time. It's easier to send it out and get it done. I know kb1_kanobe originally started the wiki thread, and rather than risking the card, would it be possible for me to send it out to him, have him do it, and send it back? Not to say I

Hello, Like others which have posted to this list, I configured a load balancing router using Julian''s patches as described in "nano.txt" for multiple ISP links. It works perfectly when all ISPs are up and running. Here''s a sample diagram: ISP A ISP B | | | WAN | WAN

Hello All, I recently put in a zaptel 1fxo/1fxs card. I am experiencing heavy static. Even with the pots line disconnected, if I do a dial I still get static. This way I know it's not the line, but rather something on the card. I tried alternate pci slots. This card has a power connector, does anyone know what the power requirements are? The unit is in a small case with a 2.4ghz p-4 and

Hi Just 2 issues I have with SPA841. 1. I autodial extension 600 then inside an AGI wait for more digits. The digits are transmitted correctly to * but they do not show up on the SPA841 display, only the 600. How do I set the 841 is show the digits after the 600# 2. Is the SPA841 pixel display backlit? Master

On 12/08/16 18:00, Alex Crow via samba wrote: > Hi List, > > We are running through testing our migration to Samba4/AD domain and > hit an odd issue. > > We set up one new VM as a legacy PDC and performed a migration on this > machine. All went fine. We added a second DC with no issues. We then > simulated the first DC going away by unplugging the VM NIC and did an >

Hello Everyone, I am once again wondering about EICON. I have had no success with the Diva Pro or Diva Pro PCI, so my question is, does anyone use an Eicon Server BRI card on Asterisk? Or would I be better off trying to get a split PRI? Regards, Greg

Hello All, Does anyone know if you can start an MOH queue on an individual call? What I mean is, for example if you have a script that you want the moh to start with certain phrases, can it be done, or are you limited to the standard looping audio? It's almost like starting a stream for each call, and terminating it when the call comes off of hold. Regards, Greg