similar to: How to adjust codec voice detection? Changin RxGain does not help me...

Hi all, We are in the process of selection IP Phones to work with our *new* Asterisk PBX. We want to buy 4 for something less than 1000$ but with a nice set of features to work with our mail box, lines, good sound quality, full duplex (and maybe speaker phone). Any suggestions for something with good voice quality and not much troubles to setup with Asterisk? Voici quality is the most

We are using now dovecot 2.0.21 with open-ldap, but this situations has already taken a quite long time. When user changes the password, we have to reload dovecot every time, otherwise the change is ignored and dovecot sees only the old password. Any ideas where the problem might exist? Conf: # 2.0.21: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-308.24.1.el5 i686 CentOS release 5.9 (Final)

Hello all.. Im new to speex, and im trying to use it in my application to transmit speech over multicast. I've done some test, but i have some questions. First, I'm reading audio with a buffer of 512 bytes, but the speex frames are 160 (using SPEEX_GET_FRAME_SIZE), so i have to manually divide the 512 bytes (256 16bit samples) in blocks of 160 float samples. Using 1 frame, i dispatch

Hi there again.. I'm still writing my particular-case-vorbis-encoder-and-player, and it worked fine until now. I'm having a problem trying to encoding the audio. I need to send the data very quickly, as soon as i capture it from the sound card. Currently i have the following (audio captured 16 bits, mono): void VorbisEncoder::encode(void *data, int r) { char *buf = (char *)

Hi all, I'm currently doing a french canadian (quebec) translation of the prompts. Almost all the about 140 default prompts are done, but there is one I can't find... In the directory, when the user found the good persor it press '1'. Then "Please whait while I try extension..." prompt is played. I can't find it and in "asterisk -r" mode the prompt is not

I saw on here where there was an asteriskathome site where I could sign up for the mailing list. However when I bring up that site I just get a blank page. Is www.asteriskathome.org the correct address? Bob

?having problems with installing asterisk@home i downloaded the asteriskathome-1.5.iso file from asteriskathome.sourceforge.net link & burned it on a cd but it is not booting what seems to be the problem hoping for a quick reply -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi everybody, I have a data set with a value and a status (positive or negative case) and I want make a ROC Analysis. So, with ROCR Package, I have got the ROC curve (True Positive Fraction [tpf] according 1-True Negative Fraction [1-tnf]). http://r.789695.n4.nabble.com/file/n4469203/01.png But, now I want a new graphic which show the sum of true positive fraction and true negative fraction

i will be installing asterisk; before that i understood i need RHEL3 or CentOS and i downloaded asterisk@home1.0 already int this download page http://sourceforge.net/project/showfiles.php?group_id=123387 i have seen Download asteriskathome-1.0.iso and Download asteriskathome-1.0-md5sum.txt please anyone explain __________________________________________________ Do You Yahoo!? Tired of

Hi, We are recieving some faxes, but I would say that about 50% of them do not work. We don't know why... is it something with the faxes speed, volume, etc? Should we use a real fax machine? Using a TDM13B with a rxgain of about 5.0... Thank you for any help. -- Alexandre Leclerc

As far as I can make out the root password for the ISO download is supposed to be epping or EPPING depending upon which version you are using. I've downloaded an ISO image from the following link but neither passwords seem to work :( http://ovh.dl.sourceforge.net:80/sourceforge/asteriskathome/asteriskathome-0.6.iso any one know the password for this one? -- Regards Phil -- This

We have replaced the simple contact management system in Asterisk@Home with SugarCRM a full CRM system. This might seem like over kill for a home PBX but Sugar has the best contact management we have seen. With click to dial functionality and the ability to import data from other contact managers it’s a great fit for Asterisk@Home. We have also added new version of the usual Asterisk software AMP

Hello , I did it from schema version 31 to 47. You'll have to get the ldf files used by adprep. The files have to be split between updates and adds. There must be also some syntax changes. I can send you the resulting files if you want. You'll also need to manually add some informations in order to be able to join a real windows 2008 R2 controller. Those informations are :

Hi All, I have been wrestling with this problem for months now and at my wits end. The sound is always very low and if I try to bring the sound louder by using the sound references icon on the top panel, the sound is choppy with lots of static. Output of lspci for the sound device is as follows: 01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)

I'm using asteriskathome 2.5. I'm using 2 spa3000 for dialing-out. I configured a trunk for each one with maximun channels=1 and an outbound route that includes both trunks. When a second outgoing call is placed, Asterisk tries to place it in the same that is already in use resulting in a busy tone. ?What can be the problem? -- Alejandro Vargas

How is working the automatic fax detection? I'm making tests in asteriskathome and the ivr plays, the fax sends little bips but asterisk don't detects it as a fax. (for testing I routed one caller id to the ivr). -- Alejandro Vargas

Hi, Just set up AAH 1.1 using an HFC BRI line and 5 IP phones as per http://voip-info.org/tiki-index.php?page=ACT+P104+IP+Phone The dialplan was configured through AMP and has nothing fancy in it. As a first time user of not only Asterisk, but also a PBX, there are some operator teething problems. After much googling & searching of voip-info.org, I cannot find any answers to these

I've had Asterisk working on a test platform really well, but I've never found a decent web front end, that works in real-time. I've got a couple of incoming numbers that I'd like to have some IVR on (i.e. select this option etc), and then distribute the calls appropriately to various SIP agents, but also in some cases back out to a PSTN/Mobile number. I have this working

https://lists.samba.org/archive/samba/2015-August/193258.html and https://lists.samba.org/archive/samba/2015-December/196850.html --------------------------------------------- Christophe Borivant Responsable d'exploitation informatique +33 5 62 20 71 71 (Poste 503) Devinlec - Groupe Leclerc -------------------------------------------- ----- Mail original ----- De: "samba"

I have an X100p card....and it is hard to hear the person on the other end. Should I mess with these values? I have heard both yes and no to this question in the past. If yes, how much louder should I make them? Thanks, MIchael