similar to: Latest CVS HEAD and the new wct4xxp card

List, I have a TE410P (T1 mode, all PRI) and a T100P (fxoks, for fxs channel bank). I cannot seem to get the T100P to send any clock to the channel bank. I prefer that it use the same clock source as the TE410P, but it doesn't matter if it's not in sync just as long as it's there. The TE410P is configured 3x pri_cpe, 1x pri_net. The three cpe go to XO Sonus switch, the net to

Hi, I try to connect my asterisk box with a classic pbx (Siemens). I have a T100P E1 card. modprobe zaptel and wct1xxp ok ztcfg -vv ok I can run asterisk and show the channels but the led still flash red My zaptel.conf : span=1,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 dchan=16 My zapata.conf : ;; E1 switchtype = euroisdn signalling = pri_net group = 1 context=e1 channel => 1-15,17-31

We're using the Quad-BRI card from Junghanns.NET with corresponding drivers (bristuff 0.0.2). The driver tries to patch asterisk libpri, which fails for current version. Anyone got an idea what'S the latest version of asterisk / libtri usable with the Quad-BRI Card? Thanks, Martin

Hello all- I have a Digium TE410P in an HP DL145 G2 dual processor server that generates well over 100,000 interrupts per second (sometimes I?ve counted 160,000+ per second) generally resulting in either the system becoming swamped and unusable or the kernel disabling the IRQ the TE410P is on resulting in the spans on that card being unusable. I have confirmed that the card is good by placing it

*1 and *2 are identical machines (single Xeon with HT disabled), one with a TE405P and the other with T100P. If I place an IAX2 call between them when both have trunk=no in their respective iax.conf sections, calls are fine. If I place an IAX2 call between them when both have trunk=yes in their respective iax.conf sections, I get "gappy" audio. What I mean by this: trunk=no:

Rob at draughon.org writes > I recently obtained a Western Electric multi-line phone and am >seeking help with getting this beast working with *. > > The interesting stuff in my * implementation consists of a T100P >card, a TDM400P card, and an Adtran TA750 channel bank with three quad-port >FXS modules and a quad-port FXO. The TA750 is wired to a 24-port Cat 5 patch >panel

Anyone has tried wct4xxp drivers' alarmdebounce parameter ? I search the internet no one seems to have used it, is this how the parameter can be specified, eg :- # modprobe wct4xxp alarmdebounce=200 Does it have the effect of making asterisk PRI more "tolerant" with poorer quality lines ? Regards.

Greetings, According to the FAQ "When you load the module and have no circuit/channel bank the LED's should flash red" I get the "knight rider" lights before the module loads, but after the modules are loaded I don't get any lights, other equipment plugged in or not. The card has been on my shelf a while so I wonder if it needs a firmware upgrade ? Can the cards

Hello, I'm trying to set the 3rd span of a new digium quad card as a E&M T1 for Faxes to a Hylafax server. The 1st and 2nd spans are working as PRIs. When I start asterisk, the logs show a signaling error and chan_zap.c dies. I also get an error that it can't read the gains but they are the standard shown below. 2.6 kernel, Debian Stable, * 1.2 svn from feb 2007 my procedure: make

TE410P card down. I have three (3) TE410P in one machine running asterisk with SS7. My problems started last week when one of my cards started switching to E1 every time after reboot. I set the following in dahdi.conf and that solve the problem. /etc/modprobe.d/ options wct4xxp t1e1override=0x00 Now all 4 ports on that card is down with Red Alarm. I tried rebooting the machine and

Hi, I'm having problems with a TE420P card, in which I cannot make calls using spans 2 through 4. After a couple of days of working correctly, spans 2, 3 and 4 start failing (can not make calls). The system is configured to work with SS7. After the ACM message goes out, immediately a REL message is returned. I searched for error messages in /var/log/messages and could not find a clue

Hello, I'm running Fedora Core 3 with udev, and asterisk/zaptel/libpri from cvs. I have followed the README.udev instructions replacing insmod with modprobe and rmmod with modprobe -r and adding the 60-zaptel.rules file, yet no matter what I do I still get this error on boot(or when I run service zaptel restart): [root@pbx ~]# /etc/init.d/zaptel restart Unloading zaptel hardware drivers:

> If you can't wait you can use the patch from someone who merged the > bristuff patch with a more recent version of cvs head... > > This one: > http://capi4linux.thepenguin.de/download/asterisk/bri-stuff-0. > 0.2a-pp.tar.gz Thanks for that pointer, I'll give it a try. Bye, martin

I attempted an upgrade of our production system from Asterisk/Zaptel 1.2 to 1.4 this weekend. Intially everything looked like it was working properly, but some time in the day following the upgrade, the system died to a kernel panic. I wasn't able to catch the entire kernel dump on the console unfortunately. I attempted to isolate the panic, and found that when 'service zaptel stop'

> The bristuff distribution comes with a install.sh script > (./install.sh) > which downloads, compiles the required software on your system. > > If you want to do it manually, look into download.sh to see the exact > cvs checkout options which downloads the required asterisk and libpri > versions. Yes, I know which libpri/asterisk versions bristuff downloads when using

Folks, I recently obtained a Western Electric multi-line phone and am seeking help with getting this beast working with *. The interesting stuff in my * implementation consists of a T100P card, a TDM400P card, and an Adtran TA750 channel bank with three quad-port FXS modules and a quad-port FXO. The TA750 is wired to a 24-port Cat 5 patch panel via a 25-pair Amp cable. The phone is a model

I have a system running CentOS 5.9 and DAHDI 2.6.2 with a 2-port E1 card using the wct4xxp driver (also using Asterisk 11.5.0, but that isn't relevant to the question). With DAHDI and Asterisk started, the system appears to run normally, as far as I can tell from limited testing. I am monitoring User, System and Nice CPU usage using SNMP and MRTG, and I have noticed that when I have started

Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice

Hi there, I have 4 identical monitors. So I decided to buy (not to expensive, around 100USD) quad head graphics card. I do not need anything particular. Only office applications, no gaming. The crucial thing is that I would like to be able to span a single window across all 4 monitors. I found following cards: Nvidia Quadro NVS440 Nvidia Quadro NVS420 Both are actually dual GPU. Could you please

On 01/23/14 23:12, Ilia Mirkin wrote: > On Thu, Jan 23, 2014 at 4:56 PM, Grzegorz S?jka <gs at sojka.co> wrote: >> Hi there, >> >> I have 4 identical monitors. So I decided to buy (not to expensive, >> around 100USD) quad head graphics card. I do not need anything >> particular. Only office applications, no gaming. The crucial thing is >> that I would