similar to: modprobe wcfxo fails.

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 4732 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050717/6773439d/attachment.gif

I seem to have almost everything working now. The only problem is all of my extensions seem to be busy. I can call out, but not in. Can someone point me to the settings in the extensions file that could cause this. Thanks in advance guys. Tim King Network Engineer Computer & Network Solutions LLC 1331 Plainfield Ave Grand Rapids MI 49505 Phone: 800-669-3290

Hi all I ahve been having problems loading the wcfss and wcfxo drivers I get an error message invalid argument and something about post install insmod failed the currently load modules do show the drivers loaded but asteris won't start lsmod root@slackware:~# lsmod Module Size Used by Not tainted soundcore 3332 0 (autoclean) wcfxo

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

I have two X100P cards that were working just fine for months. When I run modprobe wcfxo today I got the following error: ZT_CHANCONFIG failed on channel 2: No such device or address (6) /lib/modules/2.4.19/misc/wcfxo.o: post-install wcfxo failed /lib/modules/2.4.19/misc/wcfxo.o: insmod wcfxo failed The output of dmesg said that wcfxo:Out of space to write register 06 with e0. What?s

So I decided to update my code base from the cvs tree. rebuilt everything reinstall everything when I do a modprobe wcfxs or modprobe wcfxo It complains that I have the FXO and FXS statements backwards. Note well: This was a functioning system prior to the CVS update. I do have 2 FXO cards and 1 FXS (4 port with 1 module) card in the system. They are on seperate IRQ's if I set

I was wondering is anyone can tell more about the following lines in the zaptel makefile: #PRIMARY=wcfxsusb PRIMARY=torisa #PRIMARY=wcfxo I am using 2 zaptel X100P's, and wondering if I should change this in my Makefile to: #PRIMARY=torisa PRIMARY=wcfxo Just a thought. any info is appreciated.

Hello, just compiled zaptel in mandrake 9.2 and this is what I get when trying modprobe wcfxo: Apr 9 11:35:15 localhost kernel: PCI: No IRQ known for interrupt pin A of devic e 00:05.0. Please try using pci=biosirq. Apr 9 11:35:15 localhost kernel: Setting hook state to 0 (08) Apr 9 11:35:15 localhost kernel: Registered Span 1

I found similar posts regarding this error but none that answered my question. My zaptel.conf reads: fxsks=1-2 fxoks=3 loadzone=us defaultzone=us and /proc/interrupts: CPU0 0: 5542402 IO-APIC-edge timer 1: 2 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 3 IO-APIC-edge rtc 14: 72582 IO-APIC-edge

Hi all, I'm experiencing problems with the TDM card with 4 fxo modules. on all tests, if the cards has 4 modules, I get "poopy" kernel messages on the card. The card works for sometime,then hangs and a asterisk restart must be done, along with kern modules unload/reload . if I remove the first module, the card works without problems at all on the remaining 3 modules. using latest

I try to run QuadBRI wih X100P and TDM 4xxP. When I run them separate (ISDN or analog), they work, but together they load with no error messages (when ISDN is loaded first), but phones conected to interfaces are 'dead'. How to solve this? Maciej Kielinski

Hi to everybody, seems that I cannot load the zaptel modules: ztdummy says the following: [root@Hayabusa misc]# modprobe ztdummy /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register

Hi, I'm trying to figure out why my Sweex CA000022 is not detected by wcfxo on my SuSE Pro 9.3 running on a VIA EPIA SP motherboard. The card should work as its an Intel 82537EP based card. When Booting the IRQ assignments for the board indicate: Bus Dev Func Vendor Dev Class 0 20 0 8086 1080 0703 lspci shows: 0000:00:14.0 Modem: Intel Corporation: Unknown device 1080

I have a X100P and a TE110P in my Asterisk box. I can either get the X100P or the TE110P to work, but never both. Here's my zaptel.conf span=1,0,0,d4,ami e&m=1-24 fxsls=25 When I load wcte11xp and wcfxo, I will get this error. [root at asterix etc]# modprobe wcte11xp ZT_CHANCONFIG failed on channel 25: No such device or address (6) /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install

When booting Ubuntu 6.06.1 (Linux 2.6.15-27-386), wcfxo would load but not configure. I have three ways to manually force wcfxo to configure: 1) ztcfg, 2) modprobe -f wcfxo, or of course 3) unload and reload wcfxo. Each works equally well. As a workaround, now I have to put ztcfg in rc.local, which Debian doesn't favour. I had compiled the same zaptel under Ubuntu 5.02.0 on two

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup

Hi , I picked up a x100p the other day and thaught I'd havea go at getting the driver going for linux 2.6, things have gone pretty, two basic problems. 1. makefiles, with 2.6 you can't get away with using the old makefile to build the kernel modules, they will build but you'll get an error along the lines of "no module found in object". This is due to not using the new

Hello, I have found a "bug", I think in the way TDM400P cards handle FXO interface disconnect/re-connect problems. Normally I do keep all the wires connected from my CO / PABX quite securely, but I had a need to re-route the cable from one side of the desk to another, and I simply disconnected the RJ-45 connector and plugged it back in. THIS PROMPTLY RESULTED IN VERY VERY SCRATCHY AUDIO

(sent to the kvm mailing list erroneously first) -------------- next part -------------- An embedded message was scrubbed... From: Chris Lalancette <clalance at redhat.com> Subject: [PATCH]: Fix crash in virtio_blk during modprobe ; rmmod ; modprobe Date: Wed, 21 May 2008 14:45:31 +0200 Size: 4163 Url:

(sent to the kvm mailing list erroneously first) -------------- next part -------------- An embedded message was scrubbed... From: Chris Lalancette <clalance at redhat.com> Subject: [PATCH]: Fix crash in virtio_blk during modprobe ; rmmod ; modprobe Date: Wed, 21 May 2008 14:45:31 +0200 Size: 4163 Url: