similar to: Two ISDN cards on same machine

I had a problem with this card and 2.6.11 kernel. I am using FC3 but sticking with the 2.6.9 kernel. I had a lot of make warnings on the zaptel build and the card played up. It also wouldn't do a modprobe -r without crashing the system. With 2.6.9 zaptel compiles fine and I can unload the mod as and when. Also stay well away from the 2.6.12 FC3 kernel as it didn't work at all and

Hi to everyone! I am new to this list and i want to greet you all! I am trying to install Asterisk on a Fedora Core 3 Distribution with a Digi Datafire Micro V ISDN Card. I know that I have to use the ISDN4Linux so in modem.conf I set the I4l driver ,the msn and device. Modem.conf [interfaces] context=remote ;driver=aopen ; modem by AOpen driver=i4l ; isdn4linux - an

Hi all, Has anybody used this card (Digi QuadMicro) with asterisk or can anybody tell me the likelyhood of it working out OK? I need a multiport BRI adapter for use with asterisk in Japan and this card seems to support INS64 (Japanese BRI standard) and also CAPI 2.0. here is a link to the datasheet: http://www.digi.com/pdf/prd_mca_datafirequad.pdf Ive only used asterisk with Cisco SIP

Hi, This error I got it just when I gonfigure zaptel support isdneuro 31 channels. But if I configure zaptel to support T1 and just 24 channels I have no problem. ######################################################################## #### # # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # loadzone = it span=1,1,0,ccs,hdb3,crc4 bchan=1-23 dchan=16

Hi, I have this error, I have a digium card TE110P Tiger3xx When I'm load the dirvers by this command modprobe wcte11xp I got this error "Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for wct1xxp " when I'm Lunch the command ztcfg -vv I got this error.

I'm trying to install devel/gettext but unfortunately it is failing saying: install-info --quite /usr/local/info/autosprintf.info /usr/local/info/dir install-info: No such file or directory for /usr/local/info/autosprintf.info *** Error code 1 What can I do to over come this? Sincerely, Yousef Raffah Senior Systems Administrator SSIS - The Savola Group -- Aren't you using Firefox? Get

I'm experimenting with asterisk. This is my environment: - Debian sarge (vanilla kernel 2.4.29) - Asterisk 1.0.7-BRIstuffed-0.2.0-RC8g - Two sip phones (One cisco 7905 and one soft-phones X-Lite) - Digi International Datafire Micro V (Europe) (rev 02) (zaphfc) After two days of work now I can call between the two sip phones and I can call from sip phones to outside numbers via ISDN card.

Hi, I a new user of asterisk, I'm trying to in install zaptel drivers on my ISDN card Digium Tiger 3xx TE110P. And my configuration is # # Zaptel Configuration File # span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone = it ; ; ; Zapata Configuration file ; [channels] immediate=no switchtype=EuroISDN signalling=pri_cpe pridialplan=unknown context=incoming usecallerid=yes group=1 channel

Greetings to everyone! I am new to Asterisk and ISDN modules so i tried to follow many of the articles about capi, bristuff, mISDN and so on. Now I am working in mISDN but every way I try I have compiling errors! The HFC PCI card is a Digi Datafire Micro V. The bristuff give me the error "invalid module format zaphfc.ko" and I don't know how to compile and load it. The capi

I have an NXP i.MX6-based armv7l-dey-linux-gnueabihf system in which I am seeing some as-yet-unaccountable behavior in sshd when compiled with Arm/GCC 10/11/12. That is, when attempting to scp/slogin/ssh to 'root@<host>', where <host> is either a name or IPv4 or IPv6 address, the connection is quickly closed by the server without prompting for a password. The variable I can

Hi everyone, I just finished installing FreeBSD 6 RELEASE on my Toshiba Tecra A4 laptop and the installation was fine, however, when I rebooted the machine, I don't get the boot loader screen as if the machine can not see my drive! I tried the reinstalling and ensured that I set the slice to be bootable but that didn't change anything. Not sure if this is a common issue with FreeBSD 6 on

I have an on-going problem with DigiBoard Xem boards causing interrupt storms (since 4.x days). The FreeBSD driver polls the board and doesn't have a functional interrupt handler (and Linux behaves in the same way). It seems that under some conditions, the board will assert its interrupt line and, since there's no interrupt handler to clear whatever triggered the interrupt, the IRQ is

On Thu, 2 Jul 2015, Chris Olson wrote: > We have recently been asked to evaluate some computing machinery for > a new project. This particular end user has very limited experience > with the stated security requirements in a lights-out environment. > Their primary work (as well as mine) in the past has been with very > small, simple networks of desktop machines and a few

Hello all, There''s been many posts lately about problems that stem from either duplicate macs, non static macs and other networking issues that would be averted if a mac was specified upon vm creation. I''ve been using this little function I wrote in my shell scripts that setup dom-u''s from a csv file and its worked rather well, lets you control the prefix and

I don't work for Digi, so this probably can't count as completely official, but I have it on good authority that Digi would like to have FreeBSD drivers for some of their multi-port serial interfaces, and that they are willing to provide the equipment in exchange for drivers. They already have Linux drivers, but would like to have a presence in the FreeBSD community as well, partly

Hi, We've exhausted our internal capabilities as well as Sangoma tech support and were hoping someone with some expertise could help us with a pointer. Briefly, our issue is as follows. Periodically (several times an hour), we get either of the following error messages in our asterisk messages log. These correspond with dropped outbound calls on a one-to-one basis when the second error

The AMDIL Target needs new dwarf tokens for dwarf debug support, I'd we should handle this best? (which numbers to use for the new tokens): Two new tokens will be added: DW_AT_AMDIL_address_space (currently 0x3ff1) : needed in order to know which address space to read data from DW_AT_AMDIL_resource (currently 0x3ff2) : the resource ID information for when we read memory from UAV ---Yousef

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i'm new to * I've installed an hfc-s card (DIGI Micro V) with bristuff 0.0.2; when i try to call outside i get: -- Accepting AUTHENTICATED call from 192.168.1.110, requested format = 1024, actual format = 1024 -- Executing Dial("IAX2[pippo@pippo]/2", "Zap/g1/0123456") in new stack Jul 13 13:42:49

Hi! I just wanted to ask if anyone managed to get "ordinary" HFC-S ISDN cards with the zaphfc driver running in a Xen3 DomU. I am referring to this post ( http://lists.xensource.com/archives/html/xen-users/2007-04/msg00202.html ), which perfectly describes my problem and I am therefore going to simply copy-and-paste it here: ----------- snip ------------> Hi, I''m

Shajrawi, Yousef wrote: > > > The AMDIL Target needs new dwarf tokens for dwarf debug support, I’d we > should handle this best? (which numbers to use for the new tokens): > > Two new tokens will be added: > > DW_AT_AMDIL_address_space (currently 0x3ff1) : needed in order to know > which address space to read data from > > DW_AT_AMDIL_resource (currently 0x3ff2) :