similar to: Asterisk and Dell SC420 Server

Hi, I have to connect 30 phone lines to my asterisk server, can somebody help on how I have to do it ? I have a TDM405P and one TDM400P with 4 FXO ports. Do I have to use 8 TDM400P ? Or, is there another way to do it ? Thanks, Angel.

I am using Asterisk 1.2.5 and when ever I dial to either another extension or to an outside number, I seem to be experiencing a really bad echo problem. The echo is so bad, that Asterisk is almost unusable. I am using VoIPJet as my outgoing IAX provider and do not use any Zaptel hardware. Anyone have any idea's how to suppress this echo? Thank you, Jyran Glucky Advisory Programmer

Hi, I am attempting to connect my dell SC420 to a 32" LCD at 1366x768. I have attached my currect config file and currect X start log. How do I massage the xorf file to run at the native resolution of the LCD? It currently runs but is in a virtual mode. The screen scrolls. Any help is appreciated. I am using Centos 4.1. Jerry -------------- next part -------------- An embedded and

We're using an SC420 and using BRI with a quadbri Junganns card, with IAX softphones and one hardphone. Working well except that we sometimes get dropped connections between IAX and the server with a max retries exceed message, which comes from the chan_iax driver code. The BRI side of things looks like it is fine. I had been thinking it might be a network issue but now wonder if it is an

I was wondering how the Dell SC420 will perform under normal office to office communications. We would equip each server with a T1 card to make office to office SIP calls. They will integrate into our existing PBX systems. Does anyone on this list use this hardware currently???? Thanks!

Does anyone know if FreePBX can be installed on a Linux box that was built using Asterisk@Home. I would prefer to manage Asterisk with FreePBX over the AAH build. I have just not had good luck building an Asterisk system from scratch and the Centos based Amp ISO and prebuilt config files are a wonderful place to start. Nothing against Asterisk or Linux. My build from scratch issues are only

The SC420 does not support APIC (at least not with current BIOS). The Digium TDM400B card seems to always seek the same IRQ so it locks one down. The clone X100P cards often get a shared IRQ, even if vacant ones are available. I've found both the Digium card and the clones very frustrating with this system. Thus the reason Digium does not recommend it. I've gone to a mostly SIP

Hi, all Did anyone tried TDM400 card on old main board (Intel 440LX chipset -- PII)? The reason I am asking is because TDM400 needs PCI2.2 and main board is PCI2.1 I do not want to upgrade yet. Thanks, Rudolf

Thanks! So aside from the lack of redundancy, will it perform well and scale to utilize a full T1's worth of calls through to the legacy PBX? We would probably build a backup server from old equipment and rsync the configuration files. Thanks again! > -----Original Message----- > From: William Boehlke [mailto:william.boehlke@signate.com] > Sent: Friday, May 20, 2005 3:33 PM >

I will be out of the office starting 04/10/2006 and will not return until 04/30/2006. If you need immediate assistance, please call BlueWare at (231) 779-0224. For technical support, please call BlueWare at (231) 779-0224 ext 130.

I will be out of the office starting 05/08/2006 and will not return until 05/12/2006. If you need immediate assistance, please call BlueWare at (231) 779-0224. For technical support, please call BlueWare at (231) 779-0224 ext 130.

Hi, I have a Dell Poweredge SC420 and a SC430. The SC420 has an ICH6 chipset and works ok with Xen. The SC430 has an ICH7 chipset and the SATA detection fails. I''ve tried 2.6.11.10 and 2.6.12.5 kernels, with Xen 2.0.7, Xen-testing and Xen-unstable, all with the same results. I''m using the same hypervisor and kernel binaries, so problems with the compiler environment etc. have

The cheap ones on EBay won't work with the SC420 server. I have one and can't make any of the clones work. I do have one TDM40B card for analog stations that works well. The problem with the SC420 is that it won't let you set the interrupts yourself and you end up with interrupts being shared. =============================================================== Message: 26 Date:

Hi people I am new to Xen and having some trouble getting it up and running. I am trying to install it on a Dell Poweredge SC420 that has CentOS (RHEL3 clone) installed. The error that I am getting when I first try to boot into the Xen kernel, after having installed the binary and adding the necessary lines to grub.conf is : ---snip--- md: Autodetecting RAID arrays md: autorun ... md: ...

Are there any easy to use snmp(mainly temperature monitoring) tools around for Centos -4? This is on a Dell sc420 server. -- Computer House Calls, Networks, Security, Web Design: http://www.emmanuelcomputerconsulting.com What businesses are in Brunswick, Maryland? Check Brunswick First! http://www.checkbrunswickfirst.com My "Foundation" verse: Isa 54:17 No weapon that is formed

I am trying to hook up linux to an LCD 1333x768 LCD TV. XP in 1024x768 show up just fine. X does not. I have set the screen preferences to 1024x768. I have edited the xorf.conf file instead of have a range from 50 - 70 I change it to be only 60. I start X and it still comes up on my A70F monitor but still will not show on my LCD TV. xvidtune does not run on this PC. It says something about

I am new to VOIP, Linux and Asterisk. Through a lot of reading (this list, voip-info.org, documentation, etc.), I successfully installed FC3 and * on a new Dell SC420 with two X100P connecting to two PSTN lines at my office. I've also installed AMP to help me configure IVRs, call groups, extensions, etc. I use a Handytone-286 ATA and x-lite clients on the internal network and all works

I have tried beta2, beta3 and now back to 1.2.12.1 and I have correct DTMF tones 25% of the time. I have to call several times to enter an extension. I have a router and a packet shaper and some other stuff. Anyone have any other ideas why this might happen. I do not have any Zap channels but I am running CentOS4. I also do not have any cards installed. Thanks

Grasping at straws here...is anyone using a Dell PowerConnect 2224 24-port unmanaged 10/100 switch in a deployment? I have two separate asterisk installations with bad one-way audio where the only common elements left are the Dell switches and Polycom IP-500 phones. Two different ITSPs - one location uses IAX2 to the outside world, the other SIP. Two different bandwidth providers, one SDSL 1.5

Hi evereybody, I'm trying to use musiconhold during dial tones. But I only can call earing dial tones instead of music. Now will see my configuration files. AGI File(using AGI script to EXEC DIAL) print "EXEC Dial Zap/g2/numberc||m\"; $res=checkresult(); Extension.conf exten =>_numberb,1,Answer exten =>_numberb,2,SetMusicOnHold,default exten =>_numberb,3,AGI,dial.agi