similar to: chan_capi ASTCC trouble

Hi all, I would like to announce the first release of the chan_capi channel driver on sourceforge.net The package is available for download with name chan_capi-cm-0.5 and is the current CVS HEAD. It is derived from the chan_capi-0.4.0PRE1 of kapejod. The main changes are: - complete rework - fix race-conditions - fix call state handling - rework of debug/verbose messages - added capiFax

Hi all, it took a while, but on sourceforge.net I added the new release 0.6 of chan_capi-cm driver. Note: dial string and capi.conf has changed. The main changes are: - added 'relaxdtmf'. - more BSD compatibility - correct PROGRESS handling - added verbose text for capi info/reason error messages. - use correct facility-selector for echo-cancel - added application capicommand() for CAPI

Hello Armin, hello List I'm trying to get chan_capi working with asterisk from debian stable (asterisk 1.0.7, the debian version number is 1:1.0.7.dfsg.1-2). I managed to get it compiled by providing my own version of ast_copy_string. This is an Austrian PTP line. I can do outgoing calls fine (no comprehensive tests yet). For incoming calls, I'm getting "No answer" on the

Hello, While upgrading * from 1.0.9 to 1.2.5, I have installed chan-capi-head and I can't start asterisk under asterisk group "asterisk -vvvvgc -U asterisk " and "asterisk -vvvvgc -U asterisk -G dialout" work well but "asterisk -vvvvgc -U asterisk -G asterisk" fail. I am thinking about a group permission configuration but I have exactly the same one

Hi I get an error popping up when the call ends as follows: DBD::mysql::db do failed: Unknown column 'callstart' in 'field list' at /var/lib/asterisk/agi-bin/astcc.agi line 90, <STDIN> line 32. Does anyone else get this same thing? Looks as if my database table is wrong, or something else is up...not sure Thanks Clive

Could someone please comment on the current state of chan_capi, chan_misdn and chan_modem channel drivers in terms of functionality and stability. Specifically, which channel driver would be best for a passive PCI HFC or W6692 ISDN card. The chan_misdn wiki claims that chan_capi distinguishes between junghanns and non-junghans cards, and that chan_misdn is better suited for general misdn

Hello, These are error messages I get when I try to call a number over CAPI channel. -- Executing SetCallerID("SIP/xlite1-3b80", "0") in new stack -- Executing Dial("SIP/xlite1-3b80", "CAPI/hfcpci/b17") in new stack > data = hfcpci/b17 > capi request for interface 'hfcpci' == hfcpci: Call CAPI/hfcpci/b17-1 (pres=0x00,

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear "scratches" and "plops". It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to

Hello, I'm trying to use the version 0.6 of chan_capi-cm for outgoing calls it works perfectly but for incoming calls it doesn't work. I tried to set an extension to dial my from-pstn context and it works. So I think there's a problem with my capi.conf or something... Here's a debug when calling -- CONNECT_IND (PLCI=0x101,DID=9100,CID=46720XXXX,CIP=0x4,CONTROLLER=0x1)

I'm trying to compile chan_capi-0.5.4 on Slackware 10, but I have bunch of errors. (By the way, can I use chan_capi for ISDN card with winbond w6692cf chipset?) I'm not a linux expert, still :-) Before compiling, when I type "modprobe capi" to load capi module, and then "lsmod", i get list of modules: capi 6208 0 kernelcapi 30496 1

Hi, I've just installed Asterisk 1.2.0-beta1 for the first time and downloaded chan_capi and compiled it in and run it. (For comparison purposes, I've tried this with both chan_capi-0.4.0PRE1 and chan_capi-cm-0.5.4 and chan_capi-cm latest CVS). Whilst most things are fine, it seems that if I specify the 'b' parameter in the dial string before the number, sometimes the early

I have installed Asterisk 1.2.18 am am trying to install chan_capi. The current RPM ftp://ftp.melware.net/Trixbox/chan_capi-1.0.1_1.2.14-1.i386.rpm installs but Asterisk dies on startup. The following appears in the log: May 27 03:28:18 asterisk1 kernel: divas: Diva Server V-4BRI-8 IRQ:7 SerNo:25290 May 27 03:28:18 asterisk1 kernel: divas: started with major 252 May 27 03:54:17 asterisk1 init:

I am trying to use chan_capi with an Eicon Diva Server BRI. I installed the Eicon drivers from source including CAPU and I can use the board correcly using tty_test and minicom over /dev/ttyds01 or /dev/ttyds01. I need to insmod capi ( why? it is not written anywhere) and then capiinfo shows me all board parameters, but I have to break it otherwise capiinfo doesn't exit at all, but I don't

I seem to be having a problem with B3 on my ISDN line, as you can see from the dial string I am having to have asterisk generate ringing else there is no progress indication. -- Executing Dial("SIP/0014A8ACCB83-fd9f", "CAPI/g1/142392203000/ b|40|r") in new stack -- Called g1/142392203000/b -- CAPI/ISDN1/142392203000-0 is proceeding passing it to SIP/

Is there a reason the variable ${DNIS} does not get set with incoming calls via chan_capi ? Is it related to the MSN=X in capi.conf ? version = chan_capi-cm-0.6.3 example; exten => _95555555XX,1,NoOp, ${EXTEN}, ${DNIS} == ISDN1: Incoming call '0400000000' -> '95555555' -- Executing SetCDRUserField("CAPI/ISDN1/955555 55-135", "Incoming") in new

Hello All, I am having an odd problem with Armin's chan-capi_cm on builds higher than 7955. It would seem that this happens on anything higher than 7955. What is happening is the isdn is ringing, then asterisk does a goto-if and just hangs. Asterisk itself is ok, but the isdn then rings out or busys out on the other side. Outgoing works fine, this only seems to effect incoming. I

Hello, I just received a couple SX440isdn phones and was wondering if they can be plugged into a Diva 4BRI port in NT mode and work with asterisk+chan_capi? I know they probably work fine with mutliHFC cards with either bristuff of chan_misdn but since I have some spare Divas, I was curious about their potential as phone ports. The Diva's 3 and 4 ports are already set to NT mode at boot

Hi all, I have a Diva Server V-BRI-2 card, which support, as written in reference guide: Extended tone processing (human talker detection, generation and detection of country-specific tones) I would like to detect human speech and fax tone with asterisk. I think that the diva card transmit a DTMF code when detecting voice, but chan_capi doesn't receive this DTMF code. I verbose it

Hello List, I'm trying to get a PrimuX Card (www.primuxisdn.de) working. The Manufacturer says that chan_capi (the older one) used to work. Now I'm trying with chan_capi-cm and have got the following problems: Outgoing calls "ausgehend_ueber_ntba_primux.txt" the other phone rings but when I answer the call asterisk crashes. Incoming: first tried with immediate=no