similar to: asterisk and wireless on site personal paging system

Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (master/slave) be configured independent

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).

Hello, Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card? My modem.conf: -------------- [interfaces] context=remote driver=i4l msn=16453 device => /dev/ttyds01 -------------- I get the following error: -------------------------- == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[8192]: File chan_modem.c, Line 383

If I want to send outgoing DTMF over a BRI interface, can I do it with 'isdn4linux' or must I use the 'capi' library? -- . . ___. .__ Posix Systems - Sth Africa /| /| / /__ mje@posix.co.za - Mark J Elkins, Cisco CCIE / |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496 -------------- next part -------------- A non-text attachment was

Hi, Anybody have lots of experience with PCI ISDN cards and Asterisk? I'm thinking of getting a BRI in my house to deliver more advanced signaling to my PBX (yes, I'm a geek :-)) but I've never played with isdn4linux. Is there any particular BRI card that works better with Asterisk than any other? Also, can the BRI interface cards participate in conference, etc., since they

Hi list, Does chan_capi work with kernel 2.6? The Eicon Diva server card loads fine judging from /var/log/messages but Asterisk gives an error when trying to load the chan_capi module. I'm using chan_capi-0.3.5, zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a msg that may be related and don't know

Hi all, I would like to announce the first release of the chan_capi channel driver on sourceforge.net The package is available for download with name chan_capi-cm-0.5 and is the current CVS HEAD. It is derived from the chan_capi-0.4.0PRE1 of kapejod. The main changes are: - complete rework - fix race-conditions - fix call state handling - rework of debug/verbose messages - added capiFax

Hi, I am using a Netjet-s ISDN Card, and am having some trouble dialling out (Incoming Works Fine). TRUNK=Modem/ttyI0 exten => _90XXXXXXXXX,1,Dial(${TRUNK}/${EXTEN:1}||Ttm) exten => _90XXXXXXXXX,2,Congestion I get the following when diallingout: -- Starting simple switch on 'Zap/2-1' -- Executing Dial("Zap/2-1", "Modem/ttyI0/04XXXXXXXX||Ttm") in new

Hi, I'm trying to get an Eicon Diva Server4BRI card running under Ubuntu 6.06 - by downloading the v3 driver package from Melware and compiling everything. Yet, after activating the necessary modules (divas and divadidd) and interactively configuring the card (/usr/lib/divas/Config), starting up the adapter fails! The error "/usr/lib/divas/divactrl load -c 1 -Debug" produces

Hello All, I was just after a few pointers. I have just setup my Redhat 9 linux box with asterisk. Internal SIP call working fine. My Eicon ISDN card turned up today so - plugged it in and went through the modem.conf. It reports unable to open /dev/ttyI0 The problem is I have never used ISDN with Linux - let alone a telephony app - and I have no idea even where to start. Some pointers

asterisk-users-request@lists.digium.com is believed to have said: >chan_capi does not set the NT-mode. Your cards driver need to do that. >E.g. for Eicon DIVA Server cards, you just set the '-x' option with divactrl >or set NT-mode in the config wizard. >chan_capi does not (need) to know anything about what protocol the card is >doing. CAPI is independent here. Ok.

Hi all, I'm experimenting with Asterisk on linux using an Eicon Diva 2.01 S/T PCI card. I'd set up the card using the hisax driver and isdn4linux (titled as "Old ISDN4Linux (obsolete)" in the 2.6.12 kernel. I can make SIP calls and outgoing phone calls as well, but gathered a few problems on my way: 1. Plain SIP calls using softphones on windows clients work fine not counting

Hi, Does anyone use EICON Diva Server Card ISDN and CAPI ? I need some help for drivers installation. I use RED HAT 8.0 (kernel 2.4.18-14) I want to know which drivers should I use and how can I install it. Thanks Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, For the project I've used the Eicon DIVA card. It has 8 BRI ports, and for about 25% of the time there are 7 or 8 in use. So we want to replace it with an E1 card. Only issue is, replace it with what? The idea we have been playing with was to get a Digium E1 card (we already have bought lot of Quad E1 cards :-) and then just put it back to back against Asterisk server. And instead of

I am trying to understand the difference between the divas4linux available from the Eicom/Dialogic website and the melware version. Am I right in thinking that the melware version is for Trixbox or Asterisk but the Dialogic version is for Asterisk only (i.e. will not work with Trixbox?). I've noticed that some of the things mentioned on the Dialogic web site as included with Divas e.g.

Hello, I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV

Hello all, This afternoon I had a BRI line installed by Telstra (our telco in Australia). I'm using an Eicon Diva 2.02 PCI ISDN card with the isdn4linux driver. Incoming and outgoing calls with Asterisk work fine (and with no echo - my main reason for getting ISDN). However, I can't seem to get outgoing DTMF working (incoming works fine). I made a call from my desk phone (Cisco 7940G)

I want to test asterisk with its DID functions on a smaller scale without the expense of a PRI. I am in the US, and want the most reliable/stable, and feature rich solution that I can have. What ISDN card would be reccommended? My clec switch operator says he can/will send DID info to my BRI's if I wish. Can Asterisk, or one of its addons support this? What BRI solution would be

In this message I try to summarize what I have learned in these last two weeks. My primary sources of informations were the * list archives and linux ISDN docs. I ain't no * master, so don't trust too hard. Relevant messages from the * list for the current discussion are: 009177.html 009268.html 0498.html 0849.html My setup is an Eicon Diva (HiSax: Eicon.Diehl Diva driver Rev. 1.1.4.2)