similar to: (no subject)

Hi, I have a problem I will describe. I have PAP2 connected to the internet to an asterisk box with 2 TDM cards, one TE100P E1 with PRI and one TDM400P with 2 FXS an one FXO. When I call to the TDM400 cards from the PAP2 eveything is OK, sound quality is perfect. When I call to terminate the call in PSTN through E100P I hear clicks which aparently are RTP packet looses. This clicks are only heard

We are running asterisk with a single POTS line for local calls and a voip line for long distance. Whenever we receive a call on the POTS line it is more than likely, but not always, going to have significant distracting echo. In addition to that there is occasional heavy crackle or static. I have tried to follow the guidelines at :

I can either get the TE100P working or the 3 X100P clones working, but never both. I have the TE100P connected to a channel bank, and X100P clones to lines from the phone company. This is my zaptel.conf span=1,1,0,d4,ami fxsks=1-24 loadzone=us fxols=25-27 loadzone=us I then do [root@asterix root]# modprobe zaptel [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on channel

This is a system for our lab. I have no problem getting rid of X100P clones. But I am just curious why can they work. Even the drivers are not loading correctly. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kerry Garrison Sent: Tuesday, May 02, 2006 10:51 AM To: 'Asterisk Users Mailing List -

I have read thru what other users have tried in this list when they have experienced seemingly similar issues to what I have, without success. I suspect there might be an issue regarding both the X100P and TDM04b cards being used in an Intel SE7525GP2 motherboard, as I had to even wait for a BIOS update from Intel in order to utilize my 3ware 9500 SATA raid controller on it (3ware Kb -->

I am trying to get to the bottom of audio clicks, pops, dropouts with my Asterisk server. These occur even when the system is under minimal load (e.g. 1 Zap device in a queue being played music on hold) and occurs with both Zap and Sip devices so isn't network related. The audio problems occur at the same time on all channels and seems to be when Asterisk "gets busy" and uses

Hello, I had noticed strange crackling sound on my phone calls going through my zaptel device (TDM400P), so i decided to check on possible timer issue, and found lots of issues on forums concerning the sensibility of zaptel with IRQs, and tried about everything: moving PCI slots, noapic and acpi=off boot options, play with different kernel options: iosched/preemption/timer/..., play with

*This message was transferred with a trial version of CommuniGate(tm) Pro* In setting up Asterisk, I'm looking to dump my current phone system (Nortel Venture). I presently have three POTS lines. I would use a VOIP provider, but now are presently available in the Toronto, ON, CANADA area that support user owned hardware/software. I need a 416/647 area code number. In looking at FXO cards

Hmm, I don't have /etc/modprobe.conf, and wctdm is giving me problems. Which device is it talking about? [root@asterix /]# modprobe wctdm /lib/modules/2.4.20-8/misc/wctdm.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg

I wrote a week or two ago about a problem I was having with a TDM400P with 2 FXS. The problem was reliable fax transfers. There were often slow or had communication failures during transmission. Richard replied to my post and told me this is an ongoing problem that might have a solution in the weeks to come. However, I was wondering if anyone had any alternate solutions for faxing with an

As best i could figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ;

Hi, I have a TDM400P running with only one FXO port running on a VIA EPIA MS10000 (1Ghz Via Eden). When I run zttest from Zaptel 1.2.1 it hang and when I interrupt it with Ctrl-C that is the result: ?anyone have some idea about why isn't working? Some additional info: # /usr/src/zaptel/zttest -v Opened pseudo zap interface, measuring accuracy... --- Results after 0 passes --- Best:

I am so fed up with Digium cards. My company first owned a TE410P, I installed it in a Dell server and "enjoyed" its instability (we bought it months before Digium warned about the incompatibility issues). Then we switched to a TE411P for the hardware echo cancellation. Now we want to receive fax (< 20/day) on it and guess what ? Since April 2006 (again a few months after we bought

Hi, I have had this issues for ages but have ignored it, but my handsets get faint background crackle on the FXS port. When I connect the handset directly into my PSTN, it goes away complete, so I am generating this from somewhere in my asterisk box. I get it immediately when the phone goes off-hook and it stays through the dialing and call progress. I can't think of any other devices

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no

I was browsing the applications developed in zaptel and came across zttest. After I run it, I get the following: Opened pseudo zap interface, measuring accuracy... 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

Does the voicetronix card work with Asterisk? -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of woody+asterisk@solutionsfirst.com.au Sent: Monday, February 02, 2004 11:06 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Pictures of new multiport FXO/FXS from digum > -----Original Message-----

Hey all, I'm having problems where there is significant static when making SIP -> PSTN calls. SIP -> SIP and SIP -> VM calls are totally clear and fine. Here's the setup: Polycom 601,501, and ten 301s. Digum 2400 TDM card w/echo cancelling, 12 FXO ports. The TDM card is on IRQ 5 with nothing else on it. Server Specs: Asus P4P800E Deluxe P4 3.0 Ghz 1 GB Ram 80 GB SATA HD -

Hello, I have an asterisk 1.2.18 working fine, the only problem is that all applications that play audio, sound like "tremolo" or "vibrato", but musiconhold plays fine. The same audio file (wav, mp3, ...) works fine with Musiconhold() but not with Playback() or Background()... If I move app_playback.so from this system to another asterisk, playback works fine... Do you

Hello, i've googled and can't find a definite answer, so here goes: I have purchased the Digium TE100P, and am setting up the connection, however the telco i'm supposed to work with does not support PRI/ISDN E1 connections. They only support E1/R2 lines. Is there a way i can make the TE100P work with this? I've not seen any zaptel.conf that supports this. Any workarounds?