similar to: FXS

zaptel compiles fine (make linux26) but when I modprobe ztdummy I get the follow error. [root@localhost zaptel]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for ztdummy System info: Linux localhost.localdomain 2.6.9-5.0.5.ELsmp #1 SMP Thu May 19 19:24:44

Hi All I have problem with LIBMFCR2 for once Exchange I using Sangoma card, the firstly. my ssystem run successful with MFCR2, connected to E10 (Acatel Exchange), after that, i move connection connect to EWSD (Siemens), my system don't work. error protocol R2. my system: Asterisk CVS 1.1.X LibMFCR2 pre.005 and unicall-pre.005 this's my setting and my setting wanpipe1.conf

Hi all, Does somebody know why no load modules to FXS? I used zaptel-1.0.7 version driver. [root@server1 zaptel-1.0.7]# modprobe wctdm ZT_CHANCONFIG failed on channel 3: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? /lib/modules/2.4.21-27.EL/misc/wcfxs.o: post-install wcfxs failed

After speaking with several people, and even participating in a forum of several other people with echo issues, I thought I'd share what we've done (well actually what our chief R&D engineer, Brett Bourn has done...) First let me say that normal cheapy PC hardware couldn't be made to function with out echo. We tried on both the single port Digium T1 card and the 4 port Digium T1

I have a bit of a weird problem that I'm having great trouble debugging. I have a TDM400P PCI card with two FXO and two FXS modules. Both FXO modules are connected to BT lines here in the UK. Both BT lines have V23 Caller-ID, which works fine with Asterisk. Both asterisk and zaptel are fresh from CVS. Both FXO modules (channels 3 and 4) are in "group 1" for outgoing calls. My

Hi, all I have installed TDM400 with 1 FXS and 1 FXP ports. Now I am goig through documentation on how to configure it. It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do I use? Can someone send me sample zaptel.conf file for Australia? This will save me some time and will be used as a working example. Thanks, Rudolf

Good day all We installed a box a long time ago and they bought g729a licenses Now we want to upgrade and reinstall,whats going to happen with the codec,if I give the box the same ip as always will it work? Please Help

Hi all, iam a student trying to build an asterisk pbx as a simple configuration only two extention (using Xlite)without outsite telephone line. i already follow the instruction and seem the asterisk work fine because there is no error message. when i configure SIP.conf and extention.conf i hope the phone will ring each other as an extention. but it doesn't work. i follow the instruction at

Hi List, a number of our customers are reporting dropped calls. here is the config. 1 T100P T1 Card 1 Asterisk (Mid Nov build) T1 is signalled as a PRI(National) The card will only sync up if we clock, if we line side clock the card goes into yellow alarm and won't sync up. the only errors we see are framing slips. Around 2500 slips over a 18 hour period. (this was reported from

I am having a problem with Red Alarms on X100P cards. The most frustrating thing is I can not duplicate the alarms, therefore am not sure how to solve it. I have read after searching posts and the web that you can try different signaling methods which may help alleviate the problem. There is fxsks (Which I am currently using), fxsgs, and fxsls While reading the Digium site about these different

Is it possible to run NETHDLC and PRI signaling on the same 4 port T405P card? This is what I get when I try to start asterisk: == Parsing '/etc/asterisk/zapata.conf': Found Mar 24 10:48:53 ERROR[2368]: chan_zap.c:9435 setup_zap: Unknown signalling method 'pri_cpe' Mar 24 10:48:53 WARNING[2368]: chan_zap.c:9614 setup_zap: Ignoring switchtype Mar 24 10:48:53

Hi all, I am running squid proxy server integrated with Content filter Dansguardian, squidguard and clamav for Http level scanning on centos 5 .Configured webmin management tool to create and manage access control using squidguard plug in. Now it is serving request for 100 machines and Below is my hardware details. Hardware Details SUN BLADE 6000 2.67 GHz * 1 4 Gb RAM 2*146Gb HDD we

Hello all, My set up is a fractionated t1, with 1-6 voice channels, 21-24 data channels. I have a t100P installed in a amd 1500 with 512meg. Question: In order to set up the data channels, is the following correct? 1) compile new kernel with generic hdlc support 2) compile hdlc from hq.pm.waw.pl/hdlc 3) uncomment KFLAGS+=DConfig_ZAPATA_NET in zaptel makefile 4) compile zaptel, 5 compile rest

I have my Linux 2.6 kernel with the necessary HDLC config and also recompiled zaptel accordingly. On modprobe, I get: Found a Wildcard: Digium Wildcard T100P T1/PRI Debug: sleeping function called from invalid context at mm/slab.c:2000 in_atomic():0[expected: 0], irqs_disabled():1 [<0211e605>] __might_sleep+0x82/0x8c [<02144643>] kmem_cache_alloc+0x1d/0x57 [<42ad7a2c>]

I am running RedHat Fedora Core 3 with their "kernel-2.6.10-1.741_FC3" kernel, and if I use nethdlc in zaptel.conf, when I run ztcfg I get the message: ZT_CHANCONFIG failed on channel 11: Function not implemented (38) Does anyone have ideas on how I can work around this issue? T1 channels 1-10 are voice, 11-24 are data (second board isn't used at the moment). Here is my

Hello everyone, We have recently turned up a new T1 from McLeod (Midwestern CLEC). It is configured like so: /etc/zaptel.conf: loadzone=us defaultzone=us span=1,0,0,esf,b8zs ;(also tried 1,1,0,esf,b8zs) bchan=13-23 nethdlc=1-12 dchan=24 /etc/zapata.conf: switchtype=national context=pri-in signalling=pri_cpe group=1 channel => 13-23 I can get hdlc0 (and pvc0) up just fine after the

I am unable to dial out over a Wildcard TDM400P. This was working previously, so must have messed up the config somehow. I'm running Asterisk 1.6.0.15, with FreePBX 2.5.2.2. When I dial, I see: -- Executing [s at macro-dialout-trunk:19] Dial("DAHDI/1-1", "DAHDI/g0/9239220,300,") in new stack == Everyone is busy/congested at this time (1:0/1/0) It looks like the

Hi, I've connected a two T100P from digium with a 2 Rhino channelBank. Everything is working as expected. but I have occasional Falls, asterisk take 99% of CPU resources, with the following report May 24 14:52:41 WARNING[11441]: We're Zap/1-1, not H8?F??n** May 24 14:52:41 WARNING[11441]: We're Zap/1-1, not H8?F??n** May 24 14:52:41 WARNING[11441]: We're Zap/1-1, not H8?F??n**

Sorry to post such a newb set of questions but I have been hammering about trying to get Asterisk running on FC2 machine reading everything available (I think that is what stuffed me, shouldn't have read it all :-) ). Config FC2 running Asterisk 1.0.0, with the h323 compiled in and installed correctly. Amazingly enough I have everything compiled correctly and installed. I am running a

I'm trying to use ztcfg with the following zaptel.conf: span=1,1,0,esf,b8zs bchan=1-4 nethdlc 5-23 dchan=24 and I get "ZT_CHANCONFIG failed on channel 5: Function not implemented (38). This is on Debian 2.4.26. I have hdlc compiled as a module. Should hdlc be compiled into the kernel? Does anyone see a problem here? Thanks, -- Michael Welter Introspect Telephony Corp. Denver,