similar to: Asterisk and Sirrix PCI4S0 echo cancellation

Hello! I am selling hardware I have been using in various Asterisk test installations. If you are interested in buying all or any of the following items please reply off list. I got a few * X100P clones * Sirrix PCI4S0 ISDN BRI cards (+ 1 Sirrix S0 voltage/power supply) * 1 Polycom Soundpoint IP 500 (+ Plantronics headset) * Conrad HFC-S cards to give away. Some of the pieces are unused,

Hi all, How are things going ? Is there a way for me to individually identify each BRI channel on the Sirrix quad BRI board. The reason I ask is because our client uses the "Asterisk Flash Operator Panel" to monitor its external lines and transfer calls from the lines to the various SIP phones. The "Flash Operator Panel" requires that we set a static value for each line or

Hi guys, How's things going ? Got a bit of a weird one here that I've been unable to solve. I have a Panasonic PBX linked to a Sirrix Quad BRI card that is running in TE (ptp) mode in a Asterisk box - this then links through Internet to another Asterisk box via IAX2. When a user on the Panasonic PBX system dials the extension of my Sirrix Asterisk box, Asterisk answers and says

Hello all! Sirrix AG, Saarbr?cken (manufacturer of the Sirrix.PCI4S0 4-port ISDN card for Asterisk) has released the new Asterisk dialplan command PPPD (app_pppd). It allows to connect a Linux PPP daemon to an arbitrary digital (ISDN) Asterisk channel to provide RAS dialin and dialout. The PPPD command has successfully been tested with Sirrix.PCI4S0 cards and a standard ISDN4Linux ipppd "on

How do I test if the card is working or not ? Is there something that I can do to get a response from the card ? Ive put the card in, installed drivers ect but can't dial out and can't see a response when I try dial in from external number. Any ideas ? Thanks Shaun --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.857 /

Hi, I have just installed a Sirrux PC140 card for the first time. Managed to build the drivers and get * to load them on FC4, but it does not work. It seems that layer1 in the ISDN is not even activated. The same ISDN lines connected to a Samsung DCS works so it is not the lines. I am including my sirrix.conf and the output of some of the * Srx commands below. Any pointers would be

Good day all Is there someone who's got a sirrix 4 port working in NT mode I got one working good in TE mode. Apparently I must add 8 jumpers in make the cross cable a straight cable But what about the sirrix.conf? Do I just change the mode from TE to NT? Please Help or advice? Thanks Altus

Hi all, I have a sirrix bri card, connected to 2 ISDN lines.I used to get a lot of slips on it, so i put the 'master' setting to 'yes'. But every couple of hours the machine completly hangs, and i have to reboot it. I only get 1 or 2 slips,I dont know whats wrong? yusuf

Hi All I have a Junghanns BRI 4 port installed where only the first channel of each line is working i.e. channels 1 and 4 work but 2 and 5 don't. Our config is the same on this box as 15 other similar installations where all works well. the only error I see is in /var/log/messages: Jun 28 15:49:31 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun 28 15:51:27

Get the latest code and look at mdf.c. This module is the echo canceller. Tom bast@sirrix.com wrote: > > Hello MailingList! > > I'm searching a Echo Cancellation to implement it in my own project. I > found > in a newsgroup a posting that you've programmed an open-source > EC-Algorithm. > > My Question: > Is it possible to get the source code of the

Hello! I finally found a working solution. calling divactrl with the parameter -n [0..20] gives the DID-length means, if you wanna have 123-XXX in digit-wise mode, then call divactrl load -c 1 -n 3 -f ETSI and the card will wait for n digits. regards, Sebastian -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]

Hi, folks: I remain intrigued by the gap in BRI implementation between North America and Europe, and I wanted to get feedback from the list members on the matter. I'm seriously considering making the leap in our office. In Europe, the idea that an office that does not have enough lines to justify PRI would use analog lines is perceived as technologically backwards, and yet that's what

[ I'm not on the list - please CC replies to me ] Does rsync work properly (is it able to determine wich files are new correctly) when ran on machines set up with different timezone-settings? If not, what is needed to fix it? -- Ragnar Kj?rstad Big Storage

I wrote a week or two ago about a problem I was having with a TDM400P with 2 FXS. The problem was reliable fax transfers. There were often slow or had communication failures during transmission. Richard replied to my post and told me this is an ongoing problem that might have a solution in the weeks to come. However, I was wondering if anyone had any alternate solutions for faxing with an

I have a test install set up as follows Grandstream 102 ---- Asterisk ---- X100P ---- Adtran Express 3000 --- ISDN line to PSTN Most things I want to do work fine except I do have some intermittent problems with an echo. I am assuming that this is created in the link between the X100P and the Adtran terminal adaptor. I am not sure of the proper terms but on the PSTN side of the Adtran there is

Hi, I'm using app_pppd with a Digium-PRI-card for PPP connections. I had some strange problems with some IP packets passing and some not, e.g. ftp login went well, but as soon as I tried to up- or download a file, noting was transferred. I finally guessed, it must have to do something with the packet size. Then I started pppd with the parameters mtu 296 and mru 296 as in further times with

Hello everyone. I need a BRI ISDN card that works in Romania. I already have one of the "Cologne HFC-S" PCI cards and it doesn't work right, it's junk. I get waaaay too much echo using it. I'm now "shopping" for a better card. Can anyone recommend me a card that "fits" the following: (a) Costs less then $1000 / 750 euro (b) Has one or (preferably) two

Hi guys, Unfortunately this is still happening I've tried restarting Samba. Users who should be denied access after 21:00 are being denied access at 19:00. Our time zone in South Africa is GMT+2. Perhaps I should set the timezone on the server to UTC/GMT ? Do you think this will help ? Should I then leave the time set to the current time in South Africa ? Or should I set the time to the

Hi guys, Does anyone have any ideas on my questions below ? Kindest regards David Wilson D c D a t a Tel +27 33 342 7003 Fax +27 33 345 4155 Cell +27 82 4147413 MSN: dave@dcdata.co.za http://www.dcdata.co.za support@dcdata.co.za sales@dcdata.co.za KZN's first and only pure Linux solution provider ____________________________________________________ LinuxBox S.A.: Africa's shell

More information on my problem below. It seems that users that were only meant to kicked off at 21:00 were kicked off at 19:00. I've checked the time and timezone on the Linux server and all seems correct. I think I've messed up something somewhere to do with Samba and time and Logon Hours restrictions. Please point me in the right direction. Many thanks David Wilson From: "David