similar to: SER and Asterisk question

Dear All, I have downloaded the xlite version 2.0 for windows and I made the following conf in the xlite itself as the document suggested in order to make it work with Asterisk but still it doesn't work as a matter of fact when I tried to make a tcp dump I can see no packets going between the windows client and the Asterisk server at all, here is the my conf on the xlite itself: in the

If your phones are setup to connect to the asterisk box by name, then a smart DNS server can just point phones to the backup box after failure. However, since asterisk running on the backup box doesn't know about the phones, this is only half the solution ________________________________ From: Mohamed A. Gombolaty [mailto:mgombolaty@noorgroup.net] Sent: Thursday, June 30, 2005 8:30 AM To:

Hi, I'm looking for a reliable provider to use mainly for outgoing calls in the UK, incoming isn't so much of a worry as I think I'm going to accept them over ISDN. Cheers! Steve -- Steve Foy steve@narnian.org

Dear All, I was trying to enable call forwarding, following the steps of the link on voip.org regarding this issue it doesn't work and the phone I am trying to implement on is still ringing. below is my conf in extensions.conf and the CLI output during the process. My configuration is : exten => _*5X.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:2}) exten => _*5X.,2,Hangup exten =>

Questions: Does anyone have a really STABLE asterisk system running about one year without need to restart the service or the SERVER ? Does anyone have a production Call Centre saled that don't lockup and is stable for 6 months ? I'm asking this questions because we have choose Asterisk for our call centre solution but, since the bugtracker only grows and people still want to stuck more

Dear All, I am trying to find a way to stop people who use phones after business hours (a policy the company wants to implement), we have cisco 7940 and 7910 phones and sadly they don't have a phone lock password system (on these ciscos it locks config menu changes but not the calls but the cisco 7920 has this feauture). So I was wondering is there a way to make this happen in asterisk??

Hello all! I googled lists.digium.com and ser mailing list, but did not find any working configuration of asterisk used as voicemail for SER. This is my config if (uri==myself) { if (method=="REGISTER") { save("location"); log (1, "Registered\n"); break; };

I love TrixBox, with the custom config files you can tweak pretty much with TrixBox too, I have at least done some. Plan to do a plain Asterisk install later, but for now I learn a lot about the config files just with TrixBox. Some things might be a bit harder with TrixBox due to some of the premade dial plans, but can get it to work :-) _____ Fra: asterisk-users-bounces@lists.digium.com

Hi all, Hope somebody can help-I really am stumped as to why this won't work. I realise that this isnt an Asterisk problem (Please dont bash me on the list) and I have emailed the SER list but I havent received a reply and maybe someone on this list can help...Once this problem is solved I am going to use Asterisk for voicemail etc with SER (I have it set up) I currently have SER set up and

Dear All, I have installed Asterisk everything is OK until I tried to configure meeting room, configuration was simple enough when I try I get a message that it's not a valid meeting room, Now I don't have a Zaptel device on my machine, so I found that you will have to use ztdummy to make a dummy zaptel device on your machine and this is because of timing issues. My question is ztdummy

Hi, We are testing a SIP solution * + ser solution for a large implementation. All the clients are nated. When a client is dialing outside the domain (to a FWD sip account for example) all is perfect ! ;-) But ,when a call is done to a sip account, the client is ringing, then the caller can hear the nated client very well, but the nated client does'nt hear anything. RTP issue no ? I've

I have some simple questions and i need your help guys. I have ser server which working fine, between users. I am trying to add some more features to the ser. Most important is the IVR. I installed Asterisk and i am trying to register user in asterisk with no success. Part of ser.cfg file where i am trying to redirect the call to the asterisk.

ok what softphone i should use to fit windows and linux supporting iax,thanks in advance. _________________________________________________________________ FREE pop-up blocking with the new MSN Toolbar – get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

Dear All, I am totally new in this arena and I am still waiting for my installation process on freebsd to finish, but I wanted to make sure of the following: - Call routing between IP telephones can be done regardless of who made the phones? - Asterisk does support SIP V2? - it does act as SIP Proxy and Register? -- Thx MAG -------------- next part -------------- An HTML attachment was

Skipped content of type multipart/alternative-------------- next part -------------- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

Dear All, I have an asterisk server version 1.2.12.1 along with trixbox and I am having this nasty problem, I have a TE200P and have an E1 pri attached to it and zttool says it's OK, I have configured the whole 31 channels into one group as follow: Zapata-auto.conf: callerid=asreceived signalling=pri_cpe switchtype=euroisdn context=from-zaptel group=0 channel=>1-15,17-31

The registry's are stored in DB. Just export your database with 'database show' Schedule it with cron to run every 5 minutes or so. You can do that with -rx command line switch for asterisk. Send the file across to other node and pipe it through awk/perl/cut or whatever you like and import it when you bring the other node up. You will have to stop and start asterisk I think. I

Hi Users, I'm Setting UP the Voicemails by integrating with Asterisk and OpenSER, After 32 sec or 6 ring, it has to go the Voicemail server of Asterisk, In openser.cfg ........... is not hiiting the Asterisk server ............. ... any one help me ........ .... .... modparam("tm","fr_timer",6) modparam("tm","fr_inv_timer",24)

Hello list, I am using the Microsoft ADUC (Active Directory Users & Computers) tool from the RSAT suite for creating and modifying my domain users. I am aware of the "copy" functionality which really is very nice to use. Unfortunately I am missing two important actions during the user-creation process which I try to describe: 1.) When I use the template feauture (by using the

Albert Graef <Dr.Graef at t-online.de> writes: [snip] > Here are some points worth considering: > http://www.remlab.net/op/cmake.shtml (Some of these may already be > addressed in newer cmake versions, I haven't checked recently.) Albert, Some points you mention on your web page are solved. Others are not applicable to LLVM. Others can be fixed within CMake itself (with some