try something like this:
# Uncomment this if you want to use digest authentication
if (!www_authorize("", "subscriber")) {
www_challenge("", "0");
break;
};
maybe you have Problems with your realm.
And this seems not to be the list where you can find good help for your
Problem!
Best Regards
markus
Am Die, den 25.01.2005 schrieb Ashling O'Driscoll um
10:42:> Hi all,
>
> Hope somebody can help-I really am stumped as to why this won't work.
> I realise that this isnt an Asterisk problem (Please dont bash me on
> the list) and I have emailed the SER list but I havent received a
> reply and maybe someone on this list can help...Once this problem is
> solved I am going to use Asterisk for voicemail etc with SER (I have
> it set up)
>
> I currently have SER set up and clients are registering successfully.
> However I want clients to authenticate before they can register.
> Howevere when I uncomment the relevant lines in the ser.cfg file, my
> clients can't register. The only thing I can think of is that SER is
> behind NAT and my clients may/may not be behind NAT....I have
> included my ser.cfg file below...I have spent along time trying to
> understand why this is happening so any help will be appreciated!
>
> Thanks,
> Aisling.
>
> #
> # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> #debug=3 # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> #children=4
> fifo="/tmp/ser_fifo"
>
> alias=84.203.148.14
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> #loadmodule "/usr/lib/ser/modules/mysql.so"
>
> loadmodule "/usr/lib/ser/modules/sl.so"
> loadmodule "/usr/lib/ser/modules/tm.so"
> loadmodule "/usr/lib/ser/modules/rr.so"
> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/lib/ser/modules/usrloc.so"
> loadmodule "/usr/lib/ser/modules/registrar.so"
> loadmodule "/usr/lib/ser/modules/nathelper.so"
> #loadmodule "/usr/lib/ser/modules/mediaproxy.so"
> loadmodule "/usr/lib/ser/modules/textops.so"
> #loadmodule "/usr/lib/ser/modules/maxfwd.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> #loadmodule "/usr/lib/ser/modules/auth.so"
> #loadmodule "/usr/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> modparam("usrloc", "db_mode", 0)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> #modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this
> config),
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column",
"password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
> #!!Nathelper
> #modparam("registrar","nat_flag",6)
> #modparam("nathelper","natping_interval",30) #Ping
intervals 30
> seconds
> #modparam("nathelper","ping_nated_only",1) #Ping only
clinets
> behind NAT
>
> # -------------------------request routing logic-------------------
>
> # main routing logic
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> #############Aisling Insert################
> # #!Nat Insert
> # #the below line tests if the IP of the received packet is different
> from the IP in the via header and also
> # #sees if the IP address in the contact header is private
> # if (nat_uac_test("3")){
> # if (method == "REGISTER" || !
search("^Record-Route:")){
> # log("Log: Someone trying to register from private
> IP,rewriting\n");
> # # fixed_nated_contact(); #Rewrite contact with source IP
> # if (method == "INVITE"){
> # fix_nated_sdp("1"); #Add direction=active to SDP
> # };
> # force_rport(); # Add rport parameter to topmost Via
> # setflag(6); # Mark as Nated
> # };
> # };
> ###################End#####################
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
>
> if (!method == "REGISTER") record_route();
>
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> # if (!www_authorize("84.203.148.14", "subscriber")) {
> # www_challenge("84.203.148.14", "0");
> # break;
> # };
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
>
> #inserted by klaus
> if (method == "INVITE"){
> record_route();
> force_rtp_proxy();
> /* set up reply processing*/
> t_on_reply("1");
> };
>
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
> }
>
> #insert by klaus
>
> onreply_route[1]{
> if (status=~"[12][0-9][0-9]")
> force_rtp_proxy();
> }
>
> #route[1]
> #{
> #if client or server know to be behind NAT, enable relay
> # if (isflagset(6)){
> # force_rtp_proxy();
> # };
> #
> # #NAT processing of replies; apply to all transaction (for example,
> # #reinvites from public to private UA are hard to identify as
> # #Nated at the moment of request processing); look at replies
> # t_on_reply("1");
> #
> # #send it out now; use stateful forwarding as it works reliably
> # #even for UDP2TCP
> # if(!t_relay()){
> # sl_reply_error();
> # };
> #}
>
> #!!NatHelper
>
> #onreply_route[1]{
> #Nated Transaction??
> #if (isflagset(6) && status =~ "(183)\2[0-9][0-9]"){
> # #fixed_nated_contact();
> # force_rtp_proxy();
> # }
> #else if (nat_uac_test("1")){
> # fix_nated_contact();
> # };
>
>
>
> -------------------Legal Disclaimer---------------------------------------
>
> The above electronic mail transmission is confidential and intended only
for the person to whom it is addressed. Its contents may be protected by legal
and/or professional privilege. Should it be received by you in error please
contact the sender at the above quoted email address. Any unauthorised form of
reproduction of this message is strictly prohibited. The Institute does not
guarantee the security of any information electronically transmitted and is not
liable if the information contained in this communication is not a proper and
complete record of the message as transmitted by the sender nor for any delay in
its receipt.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
[netzquadrat]GmbH fon 0211.30 20 33 27
Ronsdorfer Str. 74 fax 0211.30 20 33 22
40233 D?sseldorf mobil 0163 7777 923
weitere Info unter: http://www.netzquadrat.de
** NEU von [NQ] - http://www.VOICEMEETING.de **
** die superg?nstige Sofort-Telefonkonferenz **