similar to: nativ bridging problem with ilbc!!

hallo all, i would like to know, as i would suspect, nativ bridiging should work also, if only one iax party is behind an nat router and the other has a public ip. when i connect to iax clients, which have both pubic ip's nativ bridging is working. if one of the clients is behind an nat, the iax2 channels always get routed through the asterisk server (latest stable version from cvs) ?? i

Hello! I have a number of IAX clients behind a NAT (on the same LAN) and asterisk server on the Internet. And that clients doesn't speak directly to each other, traffic goes through the asterisk server. What should I configure to make IAX clients on the same LAN to speak directly, please? notraster=no is set in iax.conf The asterisk server is on real IP behind a NAT (at DMZ with full 1-to-1

iaxComm is an Open Source softphone for the Asterisk PBX. iaxComm compiles and runs on Win32, Linux and Mac OS X (Panther) systems. Recent Changes: * Improved jitterbuffer code * Steve Underwood's Packet Loss Concealment Code Features Include: * iLBC support * GSM support * speex support * ulaw and alaw support * Blind Transfer. * Custom Ringtones per

I am using gentoo Linux and Asterisk CVS-HEAD-09/23/04-19:57. I have tested both KPhone and IaxComm for linux but receiving no audio from asterisk. sound is working fine, as I can listen playing files using PLAY or APLAY. KPhone is configured with DTMFmode=inband and codec is ulaw and IaxComm is configured with ilbc if somebody can sort out this Thank you regards, -- Atif

Original Post ---------------- I have an Asterisk related problem with mutualphone. I can connect to any number with any softphone that I am using (iaxcomm, SJPhone, and a few others). Also I have a Grandstream BT 101. But I cannot call (via Asterisk) to mutualphone destinations. Other destinations go fine. A working phone call (e.g. from iaxcomm) gives the following on the console: --

I'm a new Asterisk user. I've managed to set it up to do everything I want except sound good. Currently, Asterisk sounds considerably worse than my cell phone. I know VOIP can be _better_ than my cell phone, because I've heard Skype do it. (Using 32k iLBC, I believe.) I did an experiment with audio quality: 1) I made a recording which was pretty good. I used an iSight

On Thu, 08 Apr 2004 10:14:09 -0400, Steve Kann wrote: >Gary wrote: > >>I have noticed lack of codec negotiation with calls thru a registrated >>asterisk box. >> >>No seen problems with outbound calls, (though I haven't specifically >>tried it), but the problem exists inbound. >> >>Easiest method for testing this was ring in via a sip client set

Recently, we were notified that the mechanism included in our Asterisk source code releases to download and build support for the iLBC codec had stopped working correctly; a little investigation revealed that this occurred because of some changes on the ilbcfreeware.org website. These changes occurred as result of Google's acquisition of GIPS, who produced (and provided licenses for) the iLBC

Recently, we were notified that the mechanism included in our Asterisk source code releases to download and build support for the iLBC codec had stopped working correctly; a little investigation revealed that this occurred because of some changes on the ilbcfreeware.org website. These changes occurred as result of Google's acquisition of GIPS, who produced (and provided licenses for) the iLBC

Hello all, I've started implementing iLBC on some of the ATAs we have floating around clients' homes, but I'm coming against this error message with most of them: codec_ilbc.c: Huh? An ilbc frame that isn't a multiple of 50 bytes long from RTP (38)? The ATAs in question are various Grandstream models - the HT486 being the predominant one. Looking at the list archives, it's

I want use iLBC and have following in mind, please help me is it possible ? ISDN <-----(ALAW)-----> * <-----(ALAW)-----> SNOM SIP??<-----(iLBC)----->?*?<-----(ALAW)----->?SNOM 1. ISDN incoming codec is ALAW SNOM codec should be ALAW (can't be iLBC because a lack of codec). 2. SIP incoming codec should be iLBC (snom is ALAW). 3. SIP outgoing codec should be iLBC /snom

All, Has anybody else experienced garbled voice between a phone using alaw/ulaw and one using iLBC? I have a Nokia E series phone with a preference to use iLBC and this works fine in Asterisk 1.2. However, since moving to 1.4 - I get garbled voice on Inbound (g711->iLBC). Outbound voice seems fine (iLBC->g711) though. It's not a 20/30ms framing issue as the phone uses 30ms

I've been trying out the newest X-Lite (Build 1012) with iLBC and speex codecs. If I enable only iLBC _or_ SPX on X-Lite and call the echo-test on my asterisk server, the call connects, but I get no sound. If I enable only iLBC _and_ SPX, X-Lite indicated that it has connected with iLBC, and I hear a weird squawking. My sip.conf contains: allow=iLBC allow=SPEEX allow=gsm I've heard

i tried asterisk ilbc codec against kphone. when the call got connected, i started to immediately get these kind of message to the console: WARNING[14350]: File codec_ilbc.c, Line 141 (ilbctolin_framein): Huh? An ilbc frame that isn't a multiple of 52 bytes long from RTP (50)? WARNING[14350]: File codec_ilbc.c, Line 141 (ilbctolin_framein): Huh? An ilbc frame that isn't a multiple of

I already have ilbc installed on my system. The files are: /usr/include/ilbc/iLBC_decode.h /usr/include/ilbc/iLBC_define.h /usr/include/ilbc/iLBC_encode.h /usr/lib/libilbc.a /usr/lib/libilbc.la /usr/lib/libilbc.so -> libilbc.so.0.0.0 /usr/lib/libilbc.so.0 -> libilbc.so.0.0.0 /usr/lib/libilbc.so.0.0.0 However, if I do a "make" in asterisk-1.4.19, it will not detect that libilbc.a

Does anybody know if the updated licence on iLBC makes it safe to include in Asterisk when used in a commercial environment again? https://sites.google.com/site/webrtc/ilbc-freeware It seems to require that the Google iLBC licence document is on the box, but that otherwise it is free-to use by all in any way (BSD licence style). I believe that prior to that there was a requirement to register

Hello Folks, I noticed that all of the IaxClient based softphones with exception of Firefly only seem to have support for GSM but what about iLBC? The quality is excellent with iLBC even on a dialup connection! Meanwhile while the audio on GSM often sounds scratchy. Is anyone looking to implement iLBC in an IaxClient based softphone soon? Errol Biz4Web Solutions Limited

Hi! As the upstream of my DSL-connection is very slow, I'd like my sip-phones to use iLBC to connect to my *. My gateway provider only allows ulaw. Hence, I'd like to use the follwing setup: SIP-phone <--iLBC--> Asterisk <---ulaw----> PSTN-Gateway I get the following error: "Unable to find a codec translation path from ilbc to ulaw" Setup SIP-phone: disallow=all

I'm playing with codecs at the moment and have found some notices errors when x-lite/pro connects to asterisk with Speex or ILBC. Initially I was getting garbled sound, but after changing magic number for both codecs to 97 (as per http://www.voip-info.org/wiki-Asterisk%20phone%20xten%20xlite and http://bugs.digium.com/bug_view_page.php?bug_id=0000918) I was able to get normal voice. BUT,

This seems to have been reported before, but I've seen no resolution: http://lists.digium.com/pipermail/asterisk-dev/2003-August/001470.html http://lists.digium.com/pipermail/asterisk-users/2003-August/019091.html http://lists.digium.com/pipermail/asterisk-users/2003-October/024472.html When forcing use of Speex, no sound comes out at all (Speex-1.0.3 on the Asterisk server) When forcing