hallo all,
i would like to know, as i would suspect, nativ bridiging should work also,
if only one iax party is behind an nat router and the other has a public
ip. when i connect to iax clients, which have both pubic ip's nativ
bridging is working. if one of the clients is behind an nat, the iax2
channels always get routed through the asterisk server (latest stable
version from cvs) ?? i have also set the notransfer=no in iax.conf !!
is this normal? in my understanding, it should be possible if one party
have a public ip to traverse the udp traffic direct p2p.
am i wright?
here is what my asterisk server shows during connection (unable to transfer):
tahnks,
alex
Connected to Asterisk CVS-v1-0-12/02/04-14:33:02 currently running on snd
(pid = 3792)
Verbosity is atleast 5
-- Registered 'atuc' (AUTHENTICATED) at 82.82.238.221:30512
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'snm' logged on from 127.0.0.1
== Manager 'snm' logged off from 127.0.0.1
-- Registered 'streamer' (AUTHENTICATED) at 195.176.254.130:4569
-- Accepting AUTHENTICATED call from 80.141.93.186, requested format =
2, actual format = 2
-- Executing Dial("IAX2/krath@krath/3", "IAX2/atuc|
10") in new stack
-- Called atuc
-- Call accepted by 82.82.238.221 (format GSM)
-- Format for call is GSM
-- IAX2/atuc/9 is ringing
-- IAX2/atuc/9 answered IAX2/krath@krath/3
-- Attempting native bridge of IAX2/krath@krath/3 and IAX2/atuc/9
-- Channel 'IAX2/krath@krath/3' unable to transfer
snd*CLI> iax2 show channels
Channel Peer Username ID (Lo/Rem) Seq
(Tx/Rx) Lag Jitter JitBuf Format
IAX2/krath@krath/3 80.141.93.186 krath 00003/00002 00007/00005
[Native Bridged to ID=00009]
IAX2/atuc/9 82.82.238.221 atuc 00009/21147 00005/00006
[Native Bridged to ID=00003]
2 active IAX channel(s)
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'snm' logged on from 127.0.0.1
== Manager 'snm' logged off from 127.0.0.1
snd*CLI> iax2 show peers
Name/Username Host Mask Port Status
test/test (Unspecified) (D) 255.255.255.255 0 Unmonitored
atuc/atuc 82.82.238.221 (D) 255.255.255.255 30512 Unmonitored
aleks/aleks (Unspecified) (D) 255.255.255.255 0 Unmonitored
hk/hk (Unspecified) (D) 255.255.255.255 0 Unmonitored
chris/chris (Unspecified) (D) 255.255.255.255 0 Unmonitored
iustus/iustus (Unspecified) (D) 255.255.255.255 0 Unmonitored
krath/krath 80.141.93.186 (D) 255.255.255.255 4569 Unmonitored
streamer/stream 195.176.254.130 (D) 255.255.255.255 4569 Unmonitored
dematuc/dematuc (Unspecified) (D) 255.255.255.255 0 Unmonitored
atucek/atucek (Unspecified) (D) 255.255.255.255 0 Unmonitored
snd*CLI> exit
Executing last minute cleanups
snd:~#
hallo all,
i would like to know, as i would suspect, nativ bridiging should work also,
if only one iax party is behind an nat router and the other has a public
ip. when i connect to iax clients, which have both pubic ip's nativ
bridging is working. if one of the clients is behind an nat, the iax2
channels always get routed through the asterisk server (latest stable
version from cvs) ?? i have also set the notransfer=no in iax.conf !!
is this normal? in my understanding, it should be possible if one party
have a public ip to traverse the udp traffic direct p2p.
am i wright?
here is what my asterisk server shows during connection (unable to transfer):
tahnks,
alex
Connected to Asterisk CVS-v1-0-12/02/04-14:33:02 currently running on snd
(pid = 3792)
Verbosity is atleast 5
-- Registered 'atuc' (AUTHENTICATED) at 82.82.238.221:30512
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'snm' logged on from 127.0.0.1
== Manager 'snm' logged off from 127.0.0.1
-- Registered 'streamer' (AUTHENTICATED) at 195.176.254.130:4569
-- Accepting AUTHENTICATED call from 80.141.93.186, requested format =
2, actual format = 2
-- Executing Dial("IAX2/krath@krath/3", "IAX2/atuc|
10") in new stack
-- Called atuc
-- Call accepted by 82.82.238.221 (format GSM)
-- Format for call is GSM
-- IAX2/atuc/9 is ringing
-- IAX2/atuc/9 answered IAX2/krath@krath/3
-- Attempting native bridge of IAX2/krath@krath/3 and IAX2/atuc/9
-- Channel 'IAX2/krath@krath/3' unable to transfer
snd*CLI> iax2 show channels
Channel Peer Username ID (Lo/Rem) Seq
(Tx/Rx) Lag Jitter JitBuf Format
IAX2/krath@krath/3 80.141.93.186 krath 00003/00002 00007/00005
[Native Bridged to ID=00009]
IAX2/atuc/9 82.82.238.221 atuc 00009/21147 00005/00006
[Native Bridged to ID=00003]
2 active IAX channel(s)
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'snm' logged on from 127.0.0.1
== Manager 'snm' logged off from 127.0.0.1
snd*CLI> iax2 show peers
Name/Username Host Mask Port Status
test/test (Unspecified) (D) 255.255.255.255 0 Unmonitored
atuc/atuc 82.82.238.221 (D) 255.255.255.255 30512 Unmonitored
aleks/aleks (Unspecified) (D) 255.255.255.255 0 Unmonitored
hk/hk (Unspecified) (D) 255.255.255.255 0 Unmonitored
chris/chris (Unspecified) (D) 255.255.255.255 0 Unmonitored
iustus/iustus (Unspecified) (D) 255.255.255.255 0 Unmonitored
krath/krath 80.141.93.186 (D) 255.255.255.255 4569 Unmonitored
streamer/stream 195.176.254.130 (D) 255.255.255.255 4569 Unmonitored
dematuc/dematuc (Unspecified) (D) 255.255.255.255 0 Unmonitored
atucek/atucek (Unspecified) (D) 255.255.255.255 0 Unmonitored
snd*CLI> exit
Executing last minute cleanups
snd:~#