similar to: Re: chan_sccp / 7960: "External call" and more

> Sergio schrieb: > >>> pressing the "End call" softkey while in call produces the message >>> "That key is not active here". Do I have to configure something >>> special for that to work or is it just not yet implemented? >> >> you can quick apply this patch >> > Ah, great... Thanks! > You don't accidentally have a

On Sat, May 28, 2005 at 01:51:56AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > I'm trying the latest mayday chan_sccp and found it difficult to have > more than three speeddials. I have defined only one line but can't get > more than three SDs. On console, * says > > May 28 01:44:12 ERROR[26933]: sccp_actions.c:252 >

On Sat, Jun 04, 2005 at 10:09:29AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > there are some 3rd party patches available for chan_sccp which add a > feature and fix a few problems: > > http://www.sineapps.com/news.php?rssid=726 > > sccp_cli.c.diff <http://www.newace.com/asterisk/sccp_cli.c.diff> > Adds support for

Hi, This is a message I already posted on the chan_sccp mailing list, but since this list has a lot of active members, I'm hoping someone might be able to help (And my problem is * related, so I guess it's ok if I post it here also ;) ). I'm trying to get SCCP ATA188s to run with Asterisk. The Asterisk box uses the latest Asterisk@Home image (Version 2.6). I have compiled and

release 20050730 http://chan-sccp.berlios.de/ <ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050730.tar.bz2> - very experimental hint (busy status line lamp or icon) support. This is a very experimental system so it might not work properly with particular cisco phones. 7960, 7970 and 7940 with recent firmware does work great. Old phones can't, of course, use the hint system. There

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

http://chan-sccp.berlios.de/ 20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2 I didn't have a spare 7960 to use this week, so maybe some line issue is still present. - fixed a memory leak on database updates (dnd, cfwd*) - fixed old memory leak on unload (now unload chan_sccp.so and load chan_sccp.so work. It does reload the config when asterisk is running) - socket

Hi ! On Cisco 7960 (with or without 7914 add-on module) when I press speakerphone button (or select line with line button - which automatically put second line on speakerphone) after about 15-20 seconds of dialtone Asterisk stable dies (seg fault). Tested versions of Asterisk are 1.0.2, 1.0.3 or 1.0.5, chan_sccp is newest form CVS of chann-sccp.sourceforge.net ). Firmware of 7960 is

> I encountered a semi-lockup situation with chan_sccp and a 7960 when > switching between calls. It's kinda reproduceable - When holding, > resuming, holding, resuming between two calls on a line, one of the > calls become kinda zombie. The phone enters a state where the call is > signalled active but no softkey is there. Already fixed in the CVS Sergio

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with

>Does the CVS has the 7910 support as well ? >If you want I can test it on asterisk/OpenBSD. > > yes it's supported. I can't really get it to work right 'cause I just have ciscos 7960/7905. Can anyone donate 7910/7920/7970? I will make them work just like they work in CCM, otherwise I will send them back :-) Sergio

Ok, so multiple people have said that hinting is possible with chan_sccp on the 7940/7960's and such, has anyone got this working? How do you go about getting this to work? I'd use the wiki, but it's link to the mailing list topic on that doesn't work anymore :( -- Aaron Daniel Computer Systems Technician Sam Houston State University amdtech@shsu.edu (936) 294-4198

I've submitted to Julien http://chan-sccp.sourceforge.net/ my patches the diff file is attached to this mail Apply it to the CVS head cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/chan-sccp login cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/chan-sccp co -P chan_sccp it does include: - added support to cisco 7905 - major buttontemplate rework. Added a validMask function

Please forgive me my ignorance ... I've spent two days trying to find out something about the format of the default configuration file, which CCM produces. The only example I have so far is the one from the chan_sccp source. There were tons of references on entering the callmanager commands on a cisco command line - which I don't have (don't need thanks to chan_skinny + chan_sccp).

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

Hello: Does anyone know how to configure any of the Cisco 79XX phones to get custom ringers when using chan_sccp with Asterisk? I've currently got Asterisk's 05-24-04 CVS-HEAD and Zozo's 0.2 release of chan_sccp. I've tried using ringlist.dat, but that appears to only be for the SIP phones... Thanks for any input, Andrew

I don't think that will fix my problem. The hints on the individual user extensions (101, 102, 103 and 104 below) are working just fine. sccp.conf example of 1 user: [devices] type = 7970 description = User1 tzoffset = -6 autologin = 101,401 speeddial = 102,User2,102@wct-internal speeddial = 103,User3,103@wct-internal speeddial = 104,User4,104@wct-internal device => SEP000F90CEF9D3

Hi, I have an asterisk running great, with 2 cisco 7912 phones converted to SIP, and a cisco 2600 xl w/ E1 and SIP. I?m thinking to expand the test adding more 7912, but I prefer not convert all the 7912 to SIP, so I?m tying to put CHAN_SCCP to work. I?ve get the sources from cvs.sourceforge.net but when I try to compile, get the followings errors: [root@asterisk01 chan_sccp]# make Now

created you must place it in your web directory on the server. =20 I chained the command and also wrote the output to an xml file in the web directory. The command looks like this: =20 'php /etc/asterisk/directory.php.txt > /var/www/html/directory.xml' =20 System Speeddials using Services Button =20 =20 For speed dials I modified the php code to look to a specific file in the

I am impressed, I have been trying this for sometime using the SIP image and the only difference I can create is a 'single' and a 'double' ring on the phone. I use the 'single' ring for phone calls and the 'double' ring for the doorbell. I would love to be able to choose a ring tone based on the incoming msn or callerID. The idea of the phone shouting 'Its the