similar to: Problem starting RX_FAX and TX_FAX Module

hi does any body know which version combination of spandsp/tx_fax/rx_fax will work with * 1.2.24? i tried different combo. they're either seg fault during runtime or won't compile. very frustrated :/ p.s. i know. hylafax/iaxmodem is far more stable. but i have specific reasons to use rx_fax. -- Edwin Lam <edwin.lam at officegeneral.com> Systems Engineer, Office General, Inc.

Like some others on the list spandsp is segfaulting asterisk when recieving a fax. I'm on debian testing/unstable with freshly checked out asterisk CVS and sandsp. My libtiff version is 3.6.1. Here is the GDB output --- snip ----- Changed from phase 5 to 4 Start rx document - compression 2 Start rx page >>> CFR: 84 HDLC underflow in state 5 Post trainability Changed from phase

Hi, I have recently upgraded from Asterisk 1.2.15 to 1.4.2 and I'm experiencing trouble with rx_fax. I have followed instructions posted by Sems: http://www.sems.org/entry.asp?ENTRY_ID=197 I'm using spandsp-0.0.3pre28 and the app_rxfax and app_txfax from: http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.4/ rx_fax and tx_fax are both enabled via make

libspandsp.so.0: cannot open shared object file: No such file or directory Created the symlink: /usr/local/lib# ls -lt lib* lrwxrwxrwx 1 root staff 19 2008-11-28 22:42 libspandsp.so.0 -> libspandsp.so.1.0.0 -rw-r--r-- 1 root staff 1849266 2008-11-13 13:26 libspandsp.a -rwxr-xr-x 1 root staff 865 2008-11-13 13:26 libspandsp.la lrwxrwxrwx 1 root staff 19 2008-11-13 13:26

Well, my faxes passes through asterisk successfully, however I still have some problems about fax reception by rxfax. The softfax answers, and negotiates transmission, however then as some stage of communiation something is wrong. But I have nothing more but this log: Jun 2 00:10:21 DEBUG[16900]: chan_zap.c:4242 zt_read: DTMF digit: * on Zap/10-1 Jun 2 00:10:22 DEBUG[16900]: chan_zap.c:4242

I downloaded these 4 files: app_rxfax.c app_txfax.c asterisk.patch spandsp-20061130.tar.gz for use with asterisk 1.4 (these are the 1.4 files) I installed spandsp, copied app_rxfax and app_txfax into /asterisk-1.4beta3/apps my question is what do I do with asterisk.patch? I tried to put it in the apps directory also and run "patch < asterisk.patch" and it gave me an error.

Make sure that /usr/local/lib is in your lib path. /etc/ld.conf ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of David C. Nicosia Sent: Sunday, January 08, 2006 5:25 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] spandsp for 1.2.1 - libspandsp.so.0: cannot openshared object file:

I am getting the following error when starting: loader.c:325 __load_resource: libspandsp.so.0: cannot open shared object file: No such file or directory loader.c:499 load_modules: Loading module app_txfax.so failed! When I load app_txfax.so and/or app_txfax.so; if these are commented out, asterisk starts fine. I downloaded the spandsp version from

oops. sent this last night - I was getting this list on an alias that I didn't send from. Hello, I am attempting to setup spandsp on debian-unstable-2.6.7-recent-HEAD. Gnome requires libtiff3g 3.6.1-1. I downloaded libtiff 3.5.7 and 3.6.0 and was able to install 3.5.7,spandsp, and reinstall asterisk. A newer Makefile.patch was needed, then I switched a few lines in the Makefile (from

Hello all: In a quest to resolve the last apparent timing problems I am having with SpanDSP I am trying out some PPC hardware, specifically a B&W G3. I am running gentoo-ppc on this system and have compiled spandsp 0.0.2pre6 along with a release version of asterisk. Zaptel device (T100P) is configured and appears to be ready to go. When loading asterisk it crashes out with the following

Anyone knows where can I find spandsp? Official site seems permanently down... TIA, Simone.

I am having trouble with FC3. After doing a yum update (of 1264 packages) I still cannont compile 1.2.1 from source: make[1]: `libedit.a' is up to date. make[1]: Leaving directory `/usr/src/asterisk-1.2.1/editline' make[1]: Entering directory `/usr/src/asterisk-1.2.1/db1-ast' make[1]: `libdb1.a' is up to date. make[1]: Leaving directory `/usr/src/asterisk-1.2.1/db1-ast'

Hello, I am implementing a small call center with 1 to 4 agents. For some reason I don't understand, if an agent is busy, and it is his/her turn in the queue round, asterisk gives an "all destinations are busy" message and hangs up the call. Agents are SIP lines registered with an audiocodes MP108FXS which registers each line independently. Ringing strategy is RoundRobin (most of

Steve, I am trying to get tx_fax to work. I am using a TDM2401E card. I have a 3 page fax and I only receive the first page on every attempt. I think I have enabled debug output below. Can you tell me what the problem might be? I am using snapshot from oct 26. asterisk 1.2.13 and libtiff 3.6.1-12 from redat/centos 4.4. THanks, Jerry --------- Oct 28 13:13:40 DEBUG[22763]: app_txfax.c:69

Hi folks, I am having a small problem with asterisk-1.6.2.7 + app_fax on OpenBSD 4.7 -release. Everything seems to work fine. I have a macro which answers, receives the fax to a tiff, and then runs a script (mailfax) to convert that to pdf and email it. It all works perfectly except for some errors I am seeing in the console. After it hangs up I get a dozen or so messages in the cli

Rxfax answers, makes handshake, and crashes once the page starts to send. It receives a .tif file of 8 bytes. Asterisk dumps core - gdb shows : #0 0x281fd86c in t4_rx_putbit () from /usr/local/lib/libspandsp.so.0 #1 0x281fea3c in fast_putbit () from /usr/local/lib/libspandsp.so.0 #2 0x28208324 in decode_baud () from /usr/local/lib/libspandsp.so.0 #3 0x2820893f in process_baud () from

Guys, when compiling libunicall i have these errors. Any idea? creating libunicall.la (cd .libs && rm -f libunicall.la && ln -s ../libunicall.la libunicall.la) if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT testcall.o -MD -MP -MF ".deps/testcall.Tpo" -c -o testcall.o testcall.c; \ then mv -f ".deps/testcall.Tpo" ".deps/testcall.Po"; else rm -f

I am attempting installation of spandsp on to an Asterisk installation on Linux RH9 the distribution i am using is that are URL http://ftp2.tootai.net - the README for which i have followed verbatim - my only issue on this was the target for the port.h / tif_dir.h / tiffiop.h files in the 'headers' folder of the distribtion i put these in the /usr/include folder based simply on the

Hi ! Does anyone managed to send multipage faxes (in single TIFF file) with app_txfax from spandsp package (i'm using 0.0.2pre18, libtiff 3.7.1)? If so, I'm interested in format of TIFF file that has been sent sent succesfully (tiffinfo <fax-filename>). I'm having problems with app_txfax, sending first page successfuly 99 % of the time, but never managed to send second or

Hello all, Has anyone tried 8xE1 in one box using Asterisk and Digium boards ? What is the CPU needed for sustained performance in this capacity ? Is this affected if G.729 codec is used ? Regards, Jorge A.