similar to: Sipura 2000 behind NAT issue, Vonage is working

I have a problem that is almost certainly nat-related, but I can't figure out what's happening. Since moving the Sipura behind a NAT server (Linksys), I am no longer able to call between the two lines on the same Sipura. When I dial one extension from the other, it rings, but immediately after I pick up the ringing phone, the call is uncerimoniously dumped. I can tell the call

Does anybody have a good link how to connect Sipura with Asteriks, both behind NAT? I'm using FWD but their connection is like a weather (especially IAX), I need something more reliable. I was thinking of using stun and/or proxy but can not find any good link explaining how to setup Linux server -- #Joseph

I've got a Sipura SPA-1001 that I'm trying to get working with an Asterisk server that's on the public Internet, while the SPA-1001 is behind NAT. I did the first obvious thing and mapped ports 5060 and 10000 - 30000 to the local IP address of the SPA-1001. Tried numerous proxy settings, have all the NAT settings == yes. Registration seems to be happening; with sip debug on, I see

Hi folks. Please don't flame me but I've been googling around for days, read a tremendous amount, tried everything, and still no go. This is most definitely a typical newbie question. - I sure hope there's somebody(s) out there who'll humble themselves to help me out. I've set up an 'out of the box' basic Asterisk server running on Slackware Linux. - It basically

Hi, On my linksys/sipura phones/ATA, there is a setting called "NAT Mapping Enable" and another called "NAT Keep Alive Enable" These settings must be on in my setup so that my phones/ATA remain connected to my * server. My setup is: Home LAN - Pfsense (NAT, Dynamic Public IP)- Internet - PFsense (1-to-1 NAT, Static public IP) - Asterisk server. I was wondering:

Should a Linksys Sipura 2102 be configured with nat=yes even if it is on the local network? I have been having some troubles with a Linksys Sipura 2100 series, which suffers from NO AUDIO after a few calls.. Because it is on the same subnet as Asterisk it is configured with nat=no. When you think of it because the Sipura 2100 is a broadband router, the voice part may be considered as being behind

Can anybody point or provide working configuration how to register Sipura to Asterisk over the Internet. Both Sipura and Asterisk are behind firewalls. I'll be force to use SIP as that is the only protocol that Sipura is using. Do I need to enter any "STUN Server:" setting in "SIP" tab. On Asterisk I think I only need to make changes in sip.conf isn't it? What

I am trying to get a SPA-3000 to work behind NAT - for the sake of the exercice. The SPA is on the local network at the address 192.168.0.125 behind a NATted linux router. The machine I am trying to work with is a friend's (let's call it lolo.dyndns.org) and I've installed Asterisk 1.0.3 on it. I can see the SPA register but when I try to make an outbound call I get the message:

Sipura does include STUN as an option. It has for quite some time. We are using it with all of our Sipuras behind NAT'd gateways and it works great! Try upgrading to the latest Sipura firmware rev. Darren Nay > -----Original Message----- > From: John Todd [mailto:jtodd@loligo.com] > Sent: Saturday, May 22, 2004 1:57 PM > To: asterisk-users@lists.digium.com > Subject:

At 7:36 PM +0200 on 5/22/04, Olle E. Johansson wrote: >>[snip] >Sending NOTIFY to Asterisk is an error, but a workaround. Since Asterisk >can handled the NAT traversal all by itself with Qualify (as John points >out) disabling the NOTIFY will not change anything. > >The NOTIFY will in no way affect the status - unreachable/reachable. > >Another problem with the SIPURA is

My boss is insisting we support fax, and I keep telling him that Fax over IP is very unreliable and not recommended and his immediate come-back is "Vonage does it." and it's very hard to figure out how. I don't think Vonage does T.38, the Linksys/Sipura units they're using doesn't support T.38 to my knowledge. That means they have to be using G.711Ulaw to send faxes.

Hi all, i need sample xml configuration files for linksys pap2, linksys pap-2t, sipura 2100, sipura 2102, 1001, 3000 and 3102. All of these are linksys/sipura products. So if anyone has these sample files then plz share. -- Best Regards Rizwan Hisham Software Engineer Axvoice Inc. www.axvoice.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

I setup a vonage account last year, and cancelled it last night when I put my asterisk box together and signed up for a Broadvoice account to use with it. Now I would like to use my Linksys router as an MTA, but realize it is still programmed with all of vonage's proprietary information and I do not know how to clear it. I understand that just pushing the reset button will not do it.

Hi, I know this is slightly off topic but I figured the knowlege here is probably the best on the subject.. I want to setup remote offices with 4 to 6 SIP phones (SNOM 200) using ADSL and the internet to connect to the Asterisk box.. These phone will be behind an ADSL router using NAT... I don't want to setup another Asterisk system in each office so IAX is not an option.. I could use

We are using MFC/R2 driver successfully in at least three places in Brazil. I have problem with an Asterisk integrated with MFC/R2 with a Siemens Hicom 300. I can get a good audio quality with Grandstream, Polycom, and X-Lite softfones, but SIPURAS and Linksys get a garbled audio, something like a "Darth Vader" voice. We have tried everything in Sipura. The SIPURA 2000 and the Linksys

Voxilla news story: http://voxilla.com/voxstory84-nested-order0-threshold0.html Two new products * A Sipura 2000 in a linksys box: Linksys PAP2 Phone Adapter * A combination NAT router with 2 FXS ports: Linksys RT31P2 Broadband Router Jim James H. Thompson jht@lava.net

Anyone have any luck RMAing a Sipura phone since the Cisco take over? Sipura only has support via email or fax to end users and I haven't gotten a response to either for over 2 months. Linksys Support will jump you through all their scripted hoops to resolve your problem (they hope if they speak with a thick enough accent and make repeat the same steps over and over again that you will just

Hello all, I have a new Sipura SPA-2000 that I am trying to configure beind a NAT. The SPA is able to register to the asterisk server without a problem and the SPA can make calls to other extension that are not behind a NAT. However, when I try to call the SPA from another extension, the extension connected to the SPA rings, the user at the SPA answers, and there is no audio in either

Hello list, I have several SPA-2000's and 3000's scattered about the Internet (all behind NATs). Because I do not qualify as an ITSP, Sipura will not license their "Sipura Profile Compiler" so that I can have the units remote upgrade, remote re-configure, etc (via TFTP or HTTP). This is extremely annoying. Right now if I have to make a config change to any of these

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank