similar to: How do I know that my machine will support APIC?

With regards to the IRQ sharing situation on 400P/X100P cards how would I know if I can use IO-APIC? I am running RHEL 3 on a Dell PowerEdge 1400SC. RHEL installs without IO-APIC support. Is this because RH is overly conservative or because it queried my machine and that is the appropriate option? Does RHEL 3 have a kernel for IO-APIC if appropriate or am I expected to do a custom kernel build

My cell vm goes to asterisk, not the carrier. Apparently MWI is turned on/off with specially formatted SMS messages. Anyone know how to do this on a Treo 600? Having the phone light from Asterisk would be HUGE ... not to mention extremely cool. dbc.

I have three questions about my 7960 phone that I can't discern from the docs/wiki. 1st - If I change the SIPxxxxxx.cnf file to change registrations it sets up new lines as expected. If I delete a line it doesn't get removed when I reboot the phone. I have to go to the phone, unlock it, and reset the SIP parameters. How do I make it "forget" what it has programmed and

It looks like this meetup group is becoming the venue for contact as most "Toronto" respondents have signed up here. Can I request that the remainder who responded to the "Toronto" call signup? Shidan is the organizer and has proposed a date. I'd hate to confirm it without the remainder having input - especially those with travel times like Andrew K. out in Listowel.

> Lito Lampitoc wrote: > > thanks for enlightening. So you mean, if I have 3 lines when the > caller > > dialled the first line and it was busy, the call will be diverted > to the > > next two available lines in random? > > > > I don't think it's random. I think its just sequential. If main > line > is busy, try second. If that is

Hi! I have a 3d array: > dim(ib5km15.dbc) [1] 190 241 19 and a set of positions to extract: > ib5km.lincol.random[1:3,] [,1] [,2] [1,] 78 70 [2,] 29 213 [3,] 180 22 Geting the values of a 2D array for that set of positions would be: > ima <- ib5km15.dbc[,,1] > ima[ib5km.lincol.random[1:10,]] but don't find the way for the case of the 3D array: >

I upgraded my 7960 to sip v 6.3 and my display time has now disappeared from the top left corner. Loadid: SW: P0S3-06-3-00 ARM: PAS3ARM1 Boot: PC03M030 DSP: PS03AT38 Here is the section dealing with time in my SIPDefault.cnf file. Does anybody see anything wrong with it or have any other ideas? # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)

Ok so I see the problem that I'm having creating a new variable (LAG1DBC) in the example data transformation below is that tapply() is creating a list that is not dimensionally consistent with the data frame (data). So how do I go from the list output of tapply() to create a dimensionally consistent vector that can create the new variable in my original data frame? I've been trying

I think I must be missing something obvious, but I'm having trouble getting a data transformation to work on groupings of data within a data frame (csss3) as defined by 2 factors (population, locid). The data are sorted by year within locid within population and I want to lag another variable (dbc), i.e, shift them down by 1 row replacing the first row with NA, within groups defined by

I am still haveing problems (echo) with my X100P but I'm thinking it has more to do with the server it is in which is not a negotiable item at this time. My question then is to the use of SPA3000's as a replacement from the FXO standpoint. 1. Can you setup the FXO port to recognize distinctinve ring and call a different context like you can do with Zap channels? Being able to call a

I tried implementing my * and it didn't pass the spouse factor at this time. I wanted to hook it up for outbound only at this point to get a better handle on the dial plans and the echo problem. I thought this might have been done before as a natural part of testing - but maybe not. In wcfxo.c I found this: if (!wc->offhook && !wc->ringdebounce) { if

Digium's site now lists the Dell 1850 as a potential problem server, as it uses the intel ee1000 Ethernet chipset (as do a majority of servers in the market!). To my knowledge, ALL dell servers with Gigabit interfaces now use the same chipset. Does this mean the Digium cards can't be used in Dell servers unless you disable the onboard ethernet? I don't want to disable the onboard

Hi all, We're planning an Asterisk implementation consisting of two SC1425 Dell Servers using Digium T1 cards and SATA drives. The problem I'm having is the only PCI slot shares an IRQ with the SATA controller. Any altering of one device's IRQ takes the other device's IRQ with it in lockstep. I've disabled all non-essential integrated devices with no change. I'm a

Has anyone seen something like this before. Randomly, on longish calls, the local side of the call audio goes dead. Meaning remote caller can hear us but we cannot hear the remote person? Linux voip 2.6.18-128.1.6.el5 #1 SMP Wed Apr 1 09:10:25 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux Asterisk 1.4.24.1, Copyright (C) 1999 - 2008 Digium, Inc. and others. WANPIPE Release: 3.4.1 Wanpipe Config:

Hello, I'm writing a set of python scripts that need to consult samba ldap database without authentication. I've set up 2 machines, the first as PDC, the second as BDC. I run my scripts on both and while they run fine on the PDC they end with error on the BDC. Here is the minimal example that behave this way: import ldap LDAP_URI =

Hi Most of our customers have generic names like "Hospital", so I need to rewrite their caller ID name by looking up the number in a database on the Asterisk server, and rewriting the name such as "Reading Hospital" so that we know who's calling. Any idea if this can be done with Asterisk, and how to do it? Thank you.

> From: "James Bean" <james@hdcs.com.au> > Has anyone every setup an external open/close relay, off say a serial > interface, and have an extension trigger the relay? The following will do the trick. Just add a 5vdc solid state relay ('cause you can't sink too much current out of the RS232C port). Substitute "2", "4" or "6" in the

Hi all ! In the samba-Howto, i was looking on informations on how to set up both a samba PDC and a samba BDC controller with ldap backend. I can read: -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Do not install a Samba PDC on a OpenLDAP slave server... Possible PDC/BDC plus LDAP configurations include: . PDC -> LDAP master server, BDC -> LDAP slave server.

I have a couple of 64-Bit Xeon's with CentOS 4.2 x86_64 installed on them. They don't all have the same motherboards. I've having a difficult time getting CentOS 4.2 x86_64 to boot on some of them in SMP mode (UP works fine). After the installation of CD, it boots up but kernel panics with the following error: Badness in i8042_panic_blink at drivers/input/serio/i8042.c:992 This is

Le 02/02/2015 10:59, Rowland Penny a ?crit : > On 02/02/15 09:04, Jean-Fran?ois Morcillo wrote: >> Hello, >> >> I'm writing a set of python scripts that need to consult samba ldap >> database without authentication. >> I've set up 2 machines, the first as PDC, the second as BDC. >> I run my scripts on both and while they run fine on the PDC they end