similar to: Nortel i2004 firmware upgrade.

Is anyone successfully using this phone with Asterisk? There is a lot mentioned about CISCO but nothing about Nortel... Alex.

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME

This are "suppose" to be SIP based phones. I just got one to play with, no docs, no nothing. before I start spending time trying to sort it out I thought I'd ask to see if anyone had made one work with AST, and if they have any pearls of wisdom. mucho thanks

Hello, I am wondering if anyone is using the Nortel 2001 2002 or 2004 phones on their asterisk implementation. My local dealer says they are not compatible with any open source implementations. Is there a phone compatibility list somewhere? Cheers Cian

Hello, Cedric Hans has released an UNISTIM channel driver for asterisk (stable). You can download it at : http://mlkj.net/asterisk/chan_unistim-0.9.2.tar.bz2 Copy of README : This is a channel driver for Unistim protocol. You can use at least Nortel i2004 phones with it. Only few features are supported : Send/Receive CallerID, Redial, SoftKeys, SendText(), Music On Hold, Message Waiting

I am looking at setting up the following configuration and any help/input/comments before signing the PRI contracts will be greatly appreciated. PRI Tampa PRI Sarasota PRI <--> Nortel BCM-->Asterisk<------------------>Asterisk<---> I would like to link the Nortel BCM to * using the a digital trunk card. The BCM will

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

Has anyone fed a Nortel BCM from Asterisk? I'm interested in switching our company over, but don't want to replace all the handsets in one fell swoop. I imagine some of the PRI cards can "emulate" a switch? I'd still like to pass CallerID into the Nortel, etc but all the external traffic would be VOIP, not TDM.

Somehow I can't figure out what's going wrong. I have a Samba server running as PDC. Workstations can join the domain and users can logon. So far so good. I need winbind to be able to authorize a radius server to the PDC. This I cannot achieve. If someone got give me a clue, I spend already quiet some time Google the net :( Thanks, Mark # wibinfo -u root markr # wbinfo -a

Anyone get the Nortel 1140E phones working with Asterisk ? These look like great phones and I would like to start using them on our deployments. I know these will work with Asterisk but the sample config files are hard to find. My next step, if I cant find anything on this list is to purchase a Nortel Communication Server for testing. If anyone has a used NCS that works with these phone via SIP

Hello! I am semi-new to asterisk, I've been toying with it for about a month now. I'm using the current version from the CVS server (as of last week) and have succesfully connected it to Broadvoice, as well as a few softphones. I got a Nortel i2004 IP phone from a friend to setup at home as a homephone using Broadvoice, but going through my * box and using iptel.com for toll free calls.

Is anybody using Nortel IP Phone? I have (second hand) Nortel i2002 phone and when it boots I get: DHCP server unreachable F/W version: 0604D9C My setting: DHCP? [0-No, 1-Yes]: 1 DHCP: 0-Full, 1-Partial: 0 Can any body suggest how to troubleshoot it? -- #Joseph GPG KeyID: ED0E1FB7

Hello, I am trying to configure new opus codec in asterisk 14, but unable to find any examples of codecs.conf settings for this codec. All I am trying to do - setup peer with using opus in narrow band mode (8kHz sampling rate). Does anybody know how to configure chan_opus? -- Regards, Igor Goncharovsky Unistim Dev: http://unistim.igorg.ru -------------- next part -------------- An HTML

Has anyone had any luck getting an asterisk box to talk to a Nortel C15K softswitch? Or any Nortel "sip" products? I've been playing with it for several days and can't seem to pass calls either direction. I know that whike the Nortel says the C15K speaks SIP, it really speaks nortel's implementation of SIP, but I thought I could get it to at least pass simple calls back

Hi all, I've seen a couple of posts recently from people who are doing something with Asterisk and a T100P and a Nortel PBX. However it's not clear exactly what they are doing. Does anyone know if it's possible to use a T100P or T400P as a DSX-1 interface to connect to a T1/PRI CO module in a Nortel PBX? We have a Nortel Norstar Modular ICS PBX and I'd like to plug its CO

Hi How do i set up so that everyone can dial, for example *21* to forward all calls to a cellphone or another extension and how do I enable so that cals can be transferd between extentions. I use asterisk 1.6 and have my phones in unistim.conf and my extensions in extensions.conf. Regards /ralf ________________________________________________ Ralf Tr?skman, IT AdLibris AB, Odengatan 106, 113

Greetings! Has anyone - or is it even possible to - set up Asterisk with multiple SIP Clients to a Nortel BCM switch? The intent is to set up an Asterisk IVR behind the BCM, have the BCM route calls to Asterisk IVR and then transfer calls to one of two queues in the BCM based on ANI and some database information. The wiki (and Google) only mentions PRI, Line-side T1 or H.323 interfaces to the

Hi When i try to transfer calls from my ip2002 phone in asterisk 1.6, I can make the transfer and it rings on the extension I transfer to, but when I accept the call, asterisk dumps. How can I get it to work? And how do I save the dump error? Regards /ralf ________________________________________________ Ralf Tr?skman, IT AdLibris AB, Odengatan 106, 113 22 Stockholm, Sweden Dir:

I'm looking to build a VoIP solution for 100+ service vehicles that have WiFi hot spots installed (with cellular uplinks). Currently we are trying out Skype wireless handselts and Majick Jack. I'd also like to consider an Open Source solution that can bring the calls back to our data center [possibly integrated without our existing BCM 3.x VoIP PBX]. For hardware someone on the IRC

Does anybody have any experience with the ZyXEL Prestige 2000W? I am having problems with the line tear down when I call another extension. If nobody picks up at the other end when I hangup the 2000W, the other extension continues to ring. Is there any way to hangup a SIP call if there is no more traffic? Asterisk seems to think that there is still a connection open. This is pretty annoying